"Official" Super-T Picture and comment thread!

[redmadder]

i got my new AGT-Titanium atomizer! it looks great on my P+16! (i did change the finish to brushed, to match the top cap of the P+)

this is my first try with micro coils. i really like it actually. i think i have 10/11 wraps and it came up to 1.5 ohms... fairly solid ss wick. no dry hits, and no hot spots.

 

[Nach]

Pushing a range of 6W-12W with that setup.... do you find that its a rather cool vape? I figure its not a lot of power to go through all that coil.

 

[redmadder]

Pushing a range of 6W-12W with that setup.... do you find that its a rather cool vape? I figure its not a lot of power to go through all that coil.

it's def a much cooler vape. i'm used to .8/.9 ohm, but so far, i don't mind the change. i'm gonna try to build my next micro coil to around 1-1.2 ohm. the flavor is actually not bad, even tho i haven't broken in the new wick/coil yet. vapor production is less than my aga-s (that one measured .8 ohm, and i also increased the size of air hole too)... i'll probably bore out the air hole of the AGT when i get a chance... that should increase flavor/vapor even more.

edit::

i got around and changed the coil on my AGA-S to a micro coil... 28g, 9/10 wraps and it came out to 1.1/1.2 ohms. it's on top of the Simplicity and WOW... i'm REALLY loving the micro coils! the AGT on the P+16 is 28g, 10/11 wraps and came out to be 1.5 ohms (might change this to less wraps so i can get at least 1.2 ohms).

 

[palmbay18650]

My second Super T Precise, this time the ELA,

Even happier

 

[negrete35]

My second Super T Precise, this time the ELA,

Even happier

Looks great. But not technically a precise.


Sent from a happy vaper.

 

[snork]

Looks great. But not technically a precise.


Sent from a happy vaper.

Technically it is! The full name is Precise ELA.

 

[negrete35]

Technically it is! The full name is Precise ELA.

Well if Snork says it is, then I am happy to admit defeat.




Sent from a happy vaper.

 

[Riverboat]

Technically it is! The full name is Precise ELA.

I cant wait for Snork to get his Precise ELA............Hes going to love it.

 

[jasl90]

Super T ~ Parts & kits $3.99, for a parts kit. You can add or subtract washers to give you the throw of your choice.

I don't need a parts kit. I have the original rhodium plated screws, and it's not a matter of adding washers...The original screw itself simply isn't long enough to get me the throw I want with my AW 18490 batteries.

If David made a longer version of that screw, I'd be all over it. Maintaining brass contacts is a pita but for me, it's my best option.

 

[jasl90]

 

[Crazy Canuck]

My Kicklet came in today. Put it on my 18650, and wow is this thing huge!!

Kicking out huge clouds of vapor, but don't think he can leave the house anymore.

I do have to say it works exactly as advertised. Great build quality.


--------
Checking forums when I should be doing other things...

Sent from my iPhone using Tapatalk

 

[Boiler]

I can't read Russian, but there's some pretty pictures:

http://www.ecigtalk.ru/forum/f17/t20140.html

 

[Jonner]

Anyone out there have a simplicity with an evod setup that they could post a pic of? Thinking of buying simplicity, have an evod, would like to see how it matches up? Thanks in advance!

 

[9ball_AJ]

Anyone out there have a simplicity with an evod setup that they could post a pic of? Thinking of buying simplicity, have an evod, would like to see how it matches up? Thanks in advance!

Not a bad look if you ask me...

 

[anavidfan]

I was kidding, I have no wish to take your supplies. I do want to try it out though. I'll just buy some.

Mr Wick at Ebay has some at a very reasonable price. I got the 2mm. I usually use 3mm german silica, but the Ekowool is a tube wick and a bit stiffer and thicker, so 2mm is just perfect. So far so good, taste is right on with the good german one I get from Ebay and about the same price. Since its is thicker what I do is use the EKowool for the wick that goes in the channels and the German silica for the short stopper so my wick wont be 4mm tall.

 

[anavidfan]

 

[anavidfan]

what do you all think of the look of that photo? I was experimenting with adding a black and white real high contrast layer over the colour, kina like it. Im not really into making my photos look too slick but I like this for certain shots.

i also spot adjusted the colours , really saturated the colours too.

 

[jamesd1628]

I don't know what all those fancy words mean, but I like the photo.

what do you all think of the look of that photo? I was experimenting with adding a black and white real high contrast layer over the colour, kina like it. Im not really into making my photos look too slick but I like this for certain shots.

i also spot adjusted the colours , really saturated the colours too.

 

[rojo]

what do you all think of the look of that photo? I was experimenting with adding a black and white real high contrast layer over the colour, kina like it. Im not really into making my photos look too slick but I like this for certain shots.

i also spot adjusted the colours , really saturated the colours too.

Yeah, not sure whether you noticed, but I think you might have been leaning a little to your left while you snapped that photo. Were you drinking and taking pictures of things? I do that sometimes, too. That's a sign you're about to fall off your bar stool.

But yeah, excellent image tweaking! Achievement level: Ted Turner.

Sent from my SCH-I405 using Tapatalk 2

 

[anavidfan]

Yeah, not sure whether you noticed, but I think you might have been leaning a little to your left while you snapped that photo. Were you drinking and taking pictures of things? I do that sometimes, too. That's a sign you're about to fall off your bar stool.

But yeah, excellent image tweaking! Achievement level: Ted Turner.

Sent from my SCH-I405 using Tapatalk 2

its my VICODIN effect