"Official" Super-T Picture and comment thread!
- Thread starter forcedfuel50
- Start date
- th_trl_thread_readers 0
- Status
Sure, there could be something wrong, but things are rarely unfixable.
Did you get this P+ new or second hand? A previous owner may have jacked it up. What sorts of atomizers don't work? Three out of five anything, or three out of five bizarre one-off atomizers made by pygmies with jungle tools?
Greetings SuperT fans!!! Don't be alarmed...yes I'm a supplier for another company. Trust me...we are in no way in competition with SuperT...that would be impossible. LOL I have been an ecig/mod user for much longer than I have been helping out at SmokeStik..besides..Dave said I could post here. 
Now to the photos........the first photo is my antique 18650 (read beta I think..it's that old) with a Kamry X6 Springloaded Tank and my 10440 with a standard Ego DCT This spring loaded tank is the Holy Grail if you have an old super T with connection issues!!! I am very happy with it. But it does sit flush against the SuperT so just back it off maybe 1/4 of a turn to allow some airflow. On the 10440 is just your standard ego DCT tank.
Second photo is the same 18650 but the 10440 is wearing a Baby Raven. (Raven cartos are FILLERLESS!)
That is a solid stainless steel Tatroe Tank and it uses the exact specs as a Kanger ProTank. You can even use the Protank end pieces. It takes ProTank, Evod, and no doubt other coils. And this tank provides it's own airsupply while sitting flush on an older SuperT. But don't worry..if you have tried the ProTank and hated it for it;s airy draw this tank is nothing like that IF you use the steel bottom plate that can be purchased with it and not the ProTank end. I'm guessing all you would need to make something similair is a big fancy laser lathe.
( I do not know if the Tatroe is patented and I in no way mean to imply that any patent should be violated. This is just a concept suggestion)
Now to the photos........the first photo is my antique 18650 (read beta I think..it's that old) with a Kamry X6 Springloaded Tank and my 10440 with a standard Ego DCT This spring loaded tank is the Holy Grail if you have an old super T with connection issues!!! I am very happy with it. But it does sit flush against the SuperT so just back it off maybe 1/4 of a turn to allow some airflow. On the 10440 is just your standard ego DCT tank.
Second photo is the same 18650 but the 10440 is wearing a Baby Raven. (Raven cartos are FILLERLESS!)
That is a solid stainless steel Tatroe Tank and it uses the exact specs as a Kanger ProTank. You can even use the Protank end pieces. It takes ProTank, Evod, and no doubt other coils. And this tank provides it's own airsupply while sitting flush on an older SuperT. But don't worry..if you have tried the ProTank and hated it for it;s airy draw this tank is nothing like that IF you use the steel bottom plate that can be purchased with it and not the ProTank end. I'm guessing all you would need to make something similair is a big fancy laser lathe.
( I do not know if the Tatroe is patented and I in no way mean to imply that any patent should be violated. This is just a concept suggestion)
based on your post count I am assuming you have a fairly new superT. I actually ran in to the same issue with that spring loaded tank I just posted. The SuperT is precision milled to exact specs...your cartomizers are not. The SuperT is also harder than your cartomizers. I suggest you get some Nolox if you don't already have some. In the mean time PG,VG, or even a single drop of eliquid will suffice to lubricate the threads of the carto. Then just back it in and out until it fits without hard forcing it. One thing I have noticed is that because of the precision nature and fine threading on the SuperT it is very easy to get a slight cross thread going that you cannot see. I actually believe that is what was happening with my tank. So be really careful of that. Sometimes these simple seeming mods require a little fiddling but once you get it figured out you'll be happy.
Nice!!!!!! I sure would like to see SuperT make tanks. Nobody does fine machine work like they do.
Thanks. I thought it looked familiar. Just couldn't place it. I'd actually like to put my hands on a Chalice.
Such proud parents....their P+10 has arrived
Update:This little bugger takes after its parents....Hits like a "Big Dog"with an HH357 LR atomizer... I must say I am quite impressed with its performance.. Like all little ones they need to be changed often(batteries) But its a fair trade off for the sleek sexy look of a P+10....
Last edited:
- Status
Similar threads
