"Official" Super-T Picture and comment thread!

[spek]

I should have googled first and then posted. You beat me to it NCC and your calculations appear to be correct. Off to search for p16 cases. And it looks like 48 gauge and 54 gauge are common sizes for the cases. Also, one that holds two cigars is called a "two fingered" case. Thanks for the info NCC

 

[Frank from Chicago]

The calculations are correct. Now all you have to do is match up the size. I will post pics and vids when I get it.

 

[Cry79]

I regret not being able to help, but in Italy We do not have your unit of measure for packs of cigars, and we do not use the inch
here are distinguished by the name of the cigar
if the case is useful in my photos, is a case for cigars Cohiba

 

[atavanhalen]

Thanks for the calculations, I might have been able to do them but it would have taken waaaaaayyyy to long. It looks like 31rg is not a very common size because I can not find one for the life of me. I am off to find a 48rg case.

 

[Frank from Chicago]

That's because cigars are usually thicker than 31rg. Smallest cigar I have seen are Panatela type cigars. They are usually 34rg-38rg. That is only 1.2 mm wider than the P10. You dont want a case that you have to squeeze the P10 in there. Just my 2 cents.

 

[atavanhalen]

I will do a search thanks

That's because cigars are usually thicker than 31rg. Smallest cigar I have seen are Panatela type cigars. They are usually 34rg-38rg. That is only 1.2 mm wider than the P10. You dont want a case that you have to squeeze the P10 in there. Just my 2 cents.

 

[NCC]

That's because cigars are usually thicker than 31rg. Smallest cigar I have seen are Panatela type cigars. They are usually 34rg-38rg. That is only 1.2 mm wider than the P10. You dont want a case that you have to squeeze the P10 in there. Just my 2 cents.

For sure, adding a notch or two on the RG scale might be better, especially if it means getting a more common RG size. Wouldn't want to go too high though and make it sloppy loose. And, it may stretch a bit with use.

 

[MikeDeason]

P18 is going strong.

Silky button, sleek looks.

Would never befoul it w/a MAP tank. Just a dripper.

Cant believe how much thinner it is than my Silver Bullet.

I am liking the bottom button position but think it may be better w/a top button so you could hold it between middle and index finger (like a real cig) and activate with your thumb.

Regardless, it is art.

oh and...I would caution against the tapered end if you are considering it. My favorite way to hit the P18 is w/my thumb pressed against the flat atty end. Feels more comfortable and balanced.

Not sure how well this would work if the end was tapered.

 

[spek]

P16 is here!

P16 and accessories

P16 inside Pelican 1030 case

P16 inside 48 ring size cigar case

P16 with SS shorty drip tip in hand

Hope you enjoy the pics!

 

[forcedfuel50]

Looks awesome SPEK!!! Thanks for the Pcis! I should look into getting some of those cases in. How much do they cost?

 

[pAth77]

David, the Pelican cases are actually not that expensive. Depending on the size, they will range from $10 (Micro 1010) to $15 (Micro 1040). The pick-and-pluck foam inserts usually run for around $5. Those prices are directly from Pelican. They do have an inquiry form for bulk pricing and customization quotes. Even though I have enough cases for my Precises, I would definitely pick up more if they were Super T badged!!!

 

[spek]

Yeah the pelicans are cheap and really well made. They also have a lifetime warranty. The cigar case was $18 on ebay and the brand is castleford. There are tons of cases like that out there. Mine's longer than it needs to be but I can fit two or three batteries and a vapemate bottle of juice. The length allows the p16 to fit in with a mega sized cartomizer. The cigar case fits nicely in my pocket and is great for a day out of the house.

A couple more pictures:

p16 with vapemate and 10ml bottle


p16 stealth vape!

 

[junquedujour]

I have a quick question about that cigar case. Did it say which "ring gauge size" it was? I am looking at them and cigars have their own unit of measurement called ring gauge. junquedujour, if you got it online could you please link the website? Thanks

so sorry i didn't respond - i didn't see this until today. a friend of mine found it in a thrift store in arkansas - she knows me well and knew that i would find a use for it long before she would. there are no markings on it so i don't know the ring gauge or the manufacturer. i use it for my p18 AFTER removing the cardboard inserts.
if this helps, it measures:
top cap width is 2 5/8
top cap circumference is 6 1/4"
total length when closed is 7"

 

[spek]

No problem, junquedujour. I ended up finding the perfect case. I use it daily to tote my p16, batteries and juice around in my pocket. 48 ring gauge (cigar unit of measurement I guess) fits the PV and vapemate bottles perfectly.

 

[junquedujour]

No problem, junquedujour. I ended up finding the perfect case. I use it daily to tote my p16, batteries and juice around in my pocket. 48 ring gauge (cigar unit of measurement I guess) fits the PV and vapemate bottles perfectly.

manOman you sure did! those cigar cases are great for precise pv's.

 

[VPJUNKIE510]

I recently got a P18 and finally recived the proper batteries , By far the best feeling ecig I have ever held . Not only does it vape like a champ it looks sexy I get nothing but compliments when I'm at the bar or even at work. Very satisfied with my purchase this is the first mod I bought and don't feel the need to sell or upgrade .

 

[VaporMadness]

I recently got a P18 and finally recived the proper batteries , By far the best feeling ecig I have ever held . Not only does it vape like a champ it looks sexy I get nothing but compliments when I'm at the bar or even at work. Very satisfied with my purchase this is the first mod I bought and don't feel the need to sell or upgrade .

Excellent first mod purchase! These things are so solid... should be the last mod you'll ever need to purchase.

 

[forcedfuel50]

I recently got a P18 and finally recived the proper batteries , By far the best feeling ecig I have ever held . Not only does it vape like a champ it looks sexy I get nothing but compliments when I'm at the bar or even at work. Very satisfied with my purchase this is the first mod I bought and don't feel the need to sell or upgrade .

Congrats on your new P18! Sounds like it can even be a helpful wingman at the bar ;-)

 

[jivefly]

This thing is simply amazing. I couldn't ask for a more refined device, as they really don't get any better than this. Sorry for the blurry pictures. I took these with my cellphone.

 

[forcedfuel50]

Those are some great pics Jivefly, thanks for taking the time to post them up! What are you getting for battery life out of it?