Ok.... I am pulling the trigger but first I feel the need to ask the pros.

[Joshinthecity]

As for juice? ...try out Heather's Heavenly Vapes.

Be sure to try out Shadow, Legend, Dragon's Fire, Blueberry Muffin, Georgia Peach tobacco, Vanilla Dream, and etc. They make some Naturally Extracted tobacco juices, and many others as well. Very affordable, and very damn good. Shadow and Dragon's Fire are my favorites.

Double thumbs-up for these tobacco juices...

 

[Borescoped]

I'd like to tack onto a post by SuperT.... make sure you either have a DMM or a cartometer (one of those little black boxes with a 510 connector on it, screw on your atty after you build to verify your resistances). You could also use your MPV 2 to check, as long as you don't plan on building coils below the MPV 2's lower threshold to check resistances.

Another thing no one mentioned that is very important... a battery charger!

I'd recommend the following (as I've heard they are all decent to good chargers) - Pila, Nitecore I2/I4/D2/D4, Efest LUC (2 and 4 bay), Xtar VP1/VP2. Doesn't matter if you have good quality batteries (never buy a battery with "fire" in the name, or so I was told) if your charger is garbage.

 

[super_X_drifter]

welcome to REOvil

Here's a thread with any of your questions in mind :

http://www.e-cigarette-forum.com/forum/showthread.php?t=446819

 

[Sloth Tonight]

I'd like to tack onto a post by SuperT.... make sure you either have a DMM or a cartometer (one of those little black boxes with a 510 connector on it, screw on your atty after you build to verify your resistances). You could also use your MPV 2 to check, as long as you don't plan on building coils below the MPV 2's lower threshold to check resistances.

Another thing no one mentioned that is very important... a battery charger!

I'd recommend the following (as I've heard they are all decent to good chargers) - Pila, Nitecore I2/I4/D2/D4, Efest LUC (2 and 4 bay), Xtar VP1/VP2. Doesn't matter if you have good quality batteries (never buy a battery with "fire" in the name, or so I was told) if your charger is garbage.

The MVP2 will read lower ohms, just not fire them below 1 ohm