Old Goat Mods 5 volt illuminated bottomfeeder sale

[lynleestar]

looks really nice~!

 

[pandatera]

Is that the same paintwork you order lynleestar?

 

[lynleestar]

I believe it is~!

 

[pandatera]

Another pic. A week in, hittin it hard and lots of time in my pocket. Still looks like new. I am VERY happy with this mod.

View attachment 32624

Check the green fade from dark to light and metallic flake. Green LED and bottle has alien Visions Watermelon Overload. Trustfire red flame batt, LR510. A few shots of don julio, a fire inside, and a storm outside. Priceless.

ice

Still noobie here how do you attach a picture like that. So ppl can click and just enlarge and dun clog up the whole thread?

 

[icemanx3]

Still noobie here how do you attach a picture like that. So ppl can click and just enlarge and dun clog up the whole thread?

I sent u a pm.

ice

 

[Drottwiler]

I'm still playing around with it. I think I must had squeeze harder then you mvgratz, cuz when I do 2 squeeze I get a leak. lol. Also is it harder to use a 306 atties on these? I got it leaking when I was trying a 306 atty. I'm using one of those transparent drip tip on the 306, when you drip directly on the top you will see the juice lying down at the bridge. When you use a bottom feeder do you still see the juice lying down there? I kept squeezing cuz I didn't c no juice there, then I got a leak. LOL. Need to learn how to do this better. But when I did it right, it's vaping in heaven.

Lucky there a cup (not sure what that is call) there to catch the juice or I be all messy.

Hi Pandatera
You'll get the hang of it.I have several bottomfeeders.Each one has their own little way they like feed.The pg vg mix makes a diffrence also,as dose diffrent attys.Enjoy your going to love bottomfeeders.

 

[oldgoat]

I'm still playing around with it. I think I must had squeeze harder then you mvgratz, cuz when I do 2 squeeze I get a leak. lol. Also is it harder to use a 306 atties on these? I got it leaking when I was trying a 306 atty. I'm using one of those transparent drip tip on the 306, when you drip directly on the top you will see the juice lying down at the bridge. When you use a bottom feeder do you still see the juice lying down there? I kept squeezing cuz I didn't c no juice there, then I got a leak. LOL. Need to learn how to do this better. But when I did it right, it's vaping in heaven.

Lucky there a cup (not sure what that is call) there to catch the juice or I be all messy.

Nice pictures..what I want to tell you, as soon as you see the juice start to fill the cup stop squeezing, it is good to go...Thats how I tell when my 306 is full...when I see the fluid just start to show in the cup.

Thanks Ron Old Goat

 

[sheryder]

Is mine leaking down the wires inside and coming out the switch from my technique/flooding or is something wrong with the mod? There aren't many complaints about leakage with this mod and I didn't notice a leak the first couple of days using it but now it does. Any advice on how to make it stop Old Goat?

 

[Drottwiler]

Is mine leaking down the wires inside and coming out the switch from my technique/flooding or is something wrong with the mod? There aren't many complaints about leakage with this mod and I didn't notice a leak the first couple of days using it but now it does. Any advice on how to make it stop Old Goat?

Mine dose that to. At the white switch.Yes juice Slowly run down the red wire in to the switch. I was over feeding.

 

[Vindicated777]

Could someone educate us newbie mod owners on the correct way of cleaning...so we don't Jack anything up. Please and thank you! Hope you're all having a happy vaping day!

Sent from my PS3...it only does everything.

 

[^DukE^]

I hope there is not a problem with this mod leaking.....I just placed an order for one....I just need something easy to use for an old man like me.....

 

[pandatera]

Hi Pandatera
You'll get the hang of it.I have several bottomfeeders.Each one has their own little way they like feed.The pg vg mix makes a diffrence also,as dose diffrent attys.Enjoy your going to love bottomfeeders.

Thanks I will fiddle around w/ it. It looks like I got better at it.

Nice pictures..what I want to tell you, as soon as you see the juice start to fill the cup stop squeezing, it is good to go...Thats how I tell when my 306 is full...when I see the fluid just start to show in the cup.

Thanks Ron Old Goat

I will try again w/ the 306 w/ your advice. I'm a newbie to all this and the 306 atty as well. So I guess I will need some time to adjust. And as for the nice picture, it's because you done a wonderful paint job! Looks so pretty. I was gonna save money and just get it plain. I'm so glad I didn't, it's gorgeous. It's just so adorable and I love the LED light. I need to stop myself from activating the button just to see the LED or I will kill my atty lol.

Is mine leaking down the wires inside and coming out the switch from my technique/flooding or is something wrong with the mod? There aren't many complaints about leakage with this mod and I didn't notice a leak the first couple of days using it but now it does. Any advice on how to make it stop Old Goat?

I had mine leaked around there too yesterday while I was fiddling around. But it was becuz I over feed it. So it kinda flooded. A friend told me to put a little paper towel wrap around the needle before inserting the bottle in the PV to catch any tiny leaks incase you overfeed it.

 

[mikegun]

Mine dose that to. At the white switch.Yes juice Slowly run down the red wire in to the switch. I was over feeding.

Look at the copper colored part where you screw in the carto, atty , and see if the bottom it solid or has a hole in it as it would if it were on an auto battery, if there is a hole there i would think that is the prob and it should be fixed or the hole covered....NOT MENT FOR BOTTOMFEDERS AS THE HOLE MUST BE THERE, I HAVE ONE OF THE 5V,NON BF BOXES AND THERE IS A HOLE FOR A NEEDLE THERE, SHOULD BE SEALED....IMHO..

 

[Drottwiler]

Look at the copper colored part where you screw in the carto, atty , and see if the bottom it solid or has a hole in it as it would if it were on an auto battery, if there is a hole there i would think that is the prob and it should be fixed or the hole covered....NOT MENT FOR BOTTOMFEDERS AS THE HOLE MUST BE THERE, I HAVE ONE OF THE 5V,NON BF BOXES AND THERE IS A HOLE FOR A NEEDLE THERE, SHOULD BE SEALED....IMHO..

Mine are all bottom feeders.All but the reno do this.The juice slowly runs down the wires soldered to the connector for the addy.

 

[bmwjen]

OMG, I got my tracking number in the mail yesterday while I was at work!!!!
Can't wait to take a photo & post it to my gallery, & of course vape the heck out of it!!!

 

[mikegun]

Mine are all bottom feeders.All but the reno do this.The juice slowly runs down the wires soldered to the connector for the addy.

sounds like the needle hole is to big, or the atty connect isnt affixed to the box, id have to see it, but it should not do that, send it back, he will fix it....

 

[Rosco]

Glad to hear that you all are realizing what some of us have known for some time. Ron's mod are so simple and work fantastic. I bought 2 and neither have ever leaked. I use 1 and my buddies in Kandahar are using Ron's other one.
For you "older and wiser" users, this will make sense. "It takes a lickin' and keeps on tickin'" We saw plenty of tough action over there, and the black stealth 3.7v bottomfeeder(with no light) works perfect and the guys can use it at night without drawing any attention at all. I requested no lights for that specific reason and of course, Ron will accomodate your wishes when ordering.(if at all possible)

Congrats to all of you new users.....I love my "OldGoat" mod and have sent more than 1 person to Ron to order.

 

[CountVapula]

good to hear, i really hope mine doesnt leak.

 

[Rosco]

good to hear, i really hope mine doesnt leak.

Believe me.....Ron does not and would not consider leaking acceptable. He would ensure that doesn't happen.

 

[Pneathery]

Glad I found this thread! I ordered one of his big box mods, it's the new one that he has talked about, but not shown yet. They said it would probably be ready on Monday. I had ordered the batteries, charger, atty, carto's for a metal box juice feeder, but it didn't end up happening. I'm so glad I found his web site, and then this thread! Really looking forward to being able to leave the house and know I'm only going to have to bring one bottle, and one battery with me. I VAPE about 10ml a day, so am pretty stoked with the 7.5 ml bottle!