Old Goat Mods 5 volt illuminated bottomfeeder sale

[oldgoat]

If customers have had a hard time getting ahold of us it is because we were off line and out of Power from Sunday Night to 6:00am Tuesday and then last night we had a second storm come through and we lost power till 4:00 am this morning.

During the first storm on Sunday we had a lighting strike very close to the house and it wiped out my networking board in my computer, I got that fixer yesterday also.

Thanks and Sorry: Ron Old Goat~Old Goat mods​

 

[Rosco]

Dang Ron, sorry to hear of the bad storm and bad luck. Wish we could get some rain and cool things off here. We hit 100 yesterday and will hit it again today with heat index around 110.

Thanks for letting us all know what happened.
Hope things settle down for ya.

 

[peecheegrl]

Soooo excited!! Getting my first mod and it's an old goat!!!!!!!!!! Should be here soon!!!!!!
Thank you Ron for having an affordable box mod, that even this broke lady can afford lol

 

[Rosco]

ׁ

 

[Modrod.]

If customers have had a hard time getting ahold of us it is because we were off line and out of Power from Sunday Night to 6:00am Tuesday and then last night we had a second storm come through and we lost power till 4:00 am this morning.

During the first storm on Sunday we had a lighting strike very close to the house and it wiped out my networking board in my computer, I got that fixer yesterday also.

Thanks and Sorry: Ron Old Goat~Old Goat Mods​

We had lightning strike our house a few years back and it did the same thing to our PC's. The PC's died on us later. It also killed our washer and dryer and a couple TV's.

 

[aovaici]

Sorry about the storm I just ordered a old goat mod though! I'm SOOOOOOOO EXCITED!

 

[Rosco]

Sorry about the storm I just ordered a old goat mod though! I'm SOOOOOOOO EXCITED!

Bet ur going to love it too.

I remember last year when I got my first one. Stuck a LR carto on and it was my first coughing vape. I had never experienced so much vapor. I had been using a MKII Screwdriver and never got anything like what I got from my 3.7v bottomfeeder OldGoat.

When my more expensive PV's have acted up, my OldGoat just keeps on performing.
It's been one of the absolute best PV's - for the money - I have ever purchased.
I have several Buddys in Kandahar, Afghanistan vaping on OldGoat mods and they are loving them!!!!

Thanks again -and again -and again OldGoat for exceptionally priced mods for the ECF membership....and beyond.

 

[Xanalog]

What kind did you buy Rosco? I might want one of those!

Bet ur going to love it too.

I remember last year when I got my first one. Stuck a LR carto on and it was my first coughing vape. I had never experienced so much vapor. I had been using a MKII Screwdriver and never got anything like what I got from my 3.7v bottomfeeder OldGoat.

When my more expensive PV's have acted up, my OldGoat just keeps on performing.
It's been one of the absolute best PV's - for the money - I have ever purchased.
I have several Buddys in Kandahar, Afghanistan vaping on OldGoat mods and they are loving them!!!!

Thanks again -and again -and again OldGoat for exceptionally priced mods for the ECF membership....and beyond.

 

[Rosco]

Bet ur going to love it too.

I remember last year when I got my first one. Stuck a LR carto on and it was my first coughing vape. I had never experienced so much vapor. I had been using a MKII Screwdriver and never got anything like what I got from my 3.7v bottomfeeder OldGoat.:thumb:

When my more expensive PV's have acted up, my OldGoat just keeps on performing.
It's been one of the absolute best PV's - for the money - I have ever purchased.
I have several Buddys in Kandahar, Afghanistan vaping on OldGoat mods and they are loving them!!!!

Thanks again -and again -and again OldGoat for exceptionally priced mods for the ECF membership....and beyond.

My little 3.7V Bottomfeeder just keeps on vaping. With a low resistance cartomizer, it will fog a room at times.

 

[randyc]

I got my VV bottom feeder from Old Goat today. As usual I'm very happy with it. This is my 3rd mod from Ron and Zach. After I put the batteries in and fired it up the next thing I did was to put all my other mods away. This is the only one I need. I got a black one this time. I've been vaping for more than 2 years now and believe me, I've got my share of the goodies out there but for the money Old Goat products can't be beat. Thanks for the great product and the great service.

 

[Rosco]

I got my VV bottom feeder from Old Goat today. As usual I'm very happy with it. This is my 3rd mod from Ron and Zach. After I put the batteries in and fired it up the next thing I did was to put all my other mods away. This is the only one I need. I got a black one this time. I've been vaping for more than 2 years now and believe me, I've got my share of the goodies out there but for the money Old Goat products can't be beat. Thanks for the great product and the great service.

My words and thought precisely.

Solid Vendor and Solid Mods at reasonable prices = Outstanding vaping experience.

 

[oldgoat]

Glad to here such a good response for the VV Bottomfeeder. (it is also my favorite Mod to vape with).​

​

Thanks Ron Old Goat​

 

[Xanalog]

A couple of question for folks that have old goat bottom feeder mods...
1) If you vape a juice that you have to shake up a lot, like those with oil as in cinnamon, how does that work out for you in a bottom feeder? Do you just shake the whole mod every now and then, take the bottle out each time you want to shake it up, or just let the juice separate? Doesn't the juice gather in the overflow cup on top? If you shake the box to mix up the juice, does the juice in the overflow cup fly everywhere? Or if the box mod falls over does juice run out of the overflow cup?
2) For the bottom feeder olg goat models, 3.7 box or 3.7 big box? I like the size of the regular box but the battery looks like its only 900mah 14500. How would that perform better than an eGo with 1100 mah battery? Go with the larger box/battery?

 

[Xanalog]

Duplicate post

 

[Taniger1]

Ok I think I might have to dive in for these VV mods. Ron and Zac, you've spoiled me HORRIBLY!!!! Terrible terrible men!!!

 

[Rosco]

A couple of question for folks that have old goat bottom feeder mods...
1) If you vape a juice that you have to shake up a lot, like those with oil as in cinnamon, how does that work out for you in a bottom feeder? Do you just shake the whole mod every now and then, take the bottle out each time you want to shake it up, or just let the juice separate? Doesn't the juice gather in the overflow cup on top? If you shake the box to mix up the juice, does the juice in the overflow cup fly everywhere? Or if the box mod falls over does juice run out of the overflow cup?
2) For the bottom feeder olg goat models, 3.7 box or 3.7 big box? I like the size of the regular box but the battery looks like its only 900mah 14500. How would that perform better than an eGo with 1100 mah battery? Go with the larger box/battery?

I use the 3.7v bottomfeeder, but not with liquids with oils. I've used mine for 8 months and hardly ever get anything in the cup - ever. So I could just shake the Mod. Now if you squeeze the bottle BIG time--you'll get juice in the cup, but I don't need to squeeze the bottle more than 2-3 times max.
I know this doesn't answer all your questions, but it's all I can speak for. Hopefully others can add more.

 

[oldgoat]

I make a Big 3.7 Bottomfeeder that uses a 18650 battery which lasts for days before needing a recharge...I believe that my 14500 3.7 lasts as long or longer than the e-go, I go all day and most the night before recharging my batteries.

Hope this helped answer your questions Ron Old Goat

A couple of question for folks that have old goat bottom feeder mods...
1) If you vape a juice that you have to shake up a lot, like those with oil as in cinnamon, how does that work out for you in a bottom feeder? Do you just shake the whole mod every now and then, take the bottle out each time you want to shake it up, or just let the juice separate? Doesn't the juice gather in the overflow cup on top? If you shake the box to mix up the juice, does the juice in the overflow cup fly everywhere? Or if the box mod falls over does juice run out of the overflow cup?
2) For the bottom feeder olg goat models, 3.7 box or 3.7 big box? I like the size of the regular box but the battery looks like its only 900mah 14500. How would that perform better than an eGo with 1100 mah battery? Go with the larger box/battery?

 

[aovaici]

So here's another question... Anyone know where I can get two 14500 Battery 3.6V 900mAh + charger for like $15 range? Also where can I pickup a good atomizer for this? I am getting the 5v bottom feeder, so should I use a LR or normal atty and any opinions on where to get them for cheap? Madvapes is out. I waited till the last second to order now I think my mod might beat the accessories, failsauce.

 

[Rosco]

So here's another question... Anyone know where I can get two 14500 Battery 3.6V 900mAh + charger for like $15 range? Also where can I pickup a good atomizer for this? I am getting the 5v bottom feeder, so should I use a LR or normal atty and any opinions on where to get them for cheap? Madvapes is out. I waited till the last second to order now I think my mod might beat the accessories, failsauce.

These are what I use - and they have an excellent reputation.
You might ask Oldgoat if he has any for sale too.
Li Ion

 

[intriqken]

I just emailed an order for one of the 3.7V small ones, Hope to get an email response soon so I can send off my payment.