omh help?

Status
Not open for further replies.

mynameisrob

Ultra Member
ECF Veteran
Verified Member
Oct 7, 2011
1,696
477
PH-Illadelph-IA, PA
If its the inferno, it's basically just a re-branded eGo, and eGos arnt 3.7V, their actually 3.3-3.4V.
For eGos I dnt recommend using anything below 2.0ohms. Lower ohm cartos like 1.5 and 1.7ohm will work, but can potentially fry the mOsfet.
So for ce2s, anything 2.0ohm or higher will work fine. Personally though I hate the ce2s. They are very finicky and can leak alot. I think there are other cartos that are alot better. I know some people like the ce2s, but I just find it annoying that you have to mod them just to get them to work like they should
 

NorCalRex

Full Member
Dec 26, 2011
6
0
east bay
Yeah its the inferno. Ok so if not the ce2 then what should i use to get the most out Of my vaping experience. I'm pretty new to this. I started with a blu and have since moved on to this because I wasn't satisfied with the results. So far I've used a tank-o-miser setup, cartos and clearomizers. My clearo has lasted me about 3 weeks and I'm not too big on the cartos because of constant filling and burnt taste issues, tankos were ok but got expensive at $11 a pc. I like the clearos because I can see how much liquid I have left and ease of use. Any other easy cheap ways?
 

vittiv

Full Member
Nov 6, 2011
41
17
North Carolina, US
If anyone wants to know how to work a ce2 properly please ask. I've learned how!

Do tell! (Also, Hi from right down the road in Hillsborough, N.C.)

NorCalRex, I'm a fan of the ce2 ultimates at the lowest ohms they come in. My multimeter shows 3.2 ohms, but they're labeled as lower.
 
Last edited:

mynameisrob

Ultra Member
ECF Veteran
Verified Member
Oct 7, 2011
1,696
477
PH-Illadelph-IA, PA
What cartos did you use that you didn't like bc of constant refilling? I normally recommend the Boge 2.0ohm cartos for the ego bc they work really well. They only hold about 1ml though so you might likely like them. I use the Ressurector cartos and they work awesome but they are really made to be used on 3.7V PVs. The Ressurectors are 1.7ohm and hold alittle over 2ml of juice so they last a long time before needing a refill. They do work on eGos, but they don't run at full potential. Some eGo users still like them though, but they are 1.7ohm so they could kill your PV. My buddy killed his ego last weekend using one of my Ressurectors. Some use ago users have used them though and haven't had a prOblem. I wouldn't use them, but that's up to you. If you want something like them Hoosier Ecig Supply sells 2.0ohm XL cartos. They are the same size as the Ressurectors, but won't stress your PV as much. I'd use them instead.
The burnt taste is not because of the carto. It's because you either let them get too dry, or didn't fill them prOperly. The clearos could potentially do the same thing. All cartos have to be kept wet.

Your welcome to try the CE2s, but you said yOur looking for an easy to use carto. The CE2s are not the kind of carto that you can just fill and use. You basically have to mod them just to get them to work. Your welcome to try them tho. You might like them, but I hate them. That's why I like the Ressurectors bc you dont have to mess with them, just fill and vape away. I get avg 2-4 weeks with one Ressurector and they work great on my Epower so that's why they are all I use.

As for those tanks, i dont use that type of tank and because i sont really like them. I prefer carto tanks alot more and find they work alot better. Maybe try a tank like that.

I don't know a good clearo to recommend bc I don't use them, but someone else should be able to recommend a clearo if that's what you want to use. I prefer metal cartos bc I find they last longer and then you can use them in a carto tank too.
Every clearo I've used end uP either cracking or coming loose and leaking after a week or so of use. That's why I like the metal cartos bc they can take a beating
 

alanselo

Senior Member
ECF Veteran
Oct 6, 2011
214
1,532
Las Cruces, NM
I believe mynameisrob is talking about the dual coil carto tanks. I get mine from madvapes. I have two tanks. They come with a carto already. The 2 initial ones I bought have been going strong for over 4 weeks now. He is right about the burnt tase too, at least my experience. If they don't go dry, and they won't with a tank, they won't have the burnt taste.

I fill mine up (one) and it easily lasts me a whole day and into the next day. They are not very expensive, about 12 bucks if I remember correctly. You can also buy just the carto to replace it if one goes out and still use the tank.

Cartomizers

Good luck.
 

Stef64

Ultra Member
ECF Veteran
May 5, 2011
2,047
1,223
Michigan
If you want something that works great out of the box stay away from the CE2's. Some work great, some don't. They are very inconsistent out of the box. If you're willing to tinker with them before use, they will work better and last longer than other popular cartos IMO. Get the CE2 Ultimates or the Fluxomizer Deluxe in 2.4 or 2.6 ohm.

Before filling, remove all three seal from the top of the carto and do a quick dry burn or two (5-10 seconds). Fill with a syringe and only use the middle seal with the groove down (the skinny one that looks like a washer). Put a drop or two of juice on the coil, then vape away. A drip tip helps also.

To clean them, remove the seal(s), remove the tube then rinse the wick in distilled water. Dry the wick by patting it down with a paper towel and dry burn the coil (5 seconds on, 5 seconds off) until the coil looks clean and there is little or no smoke coming from the coil. Reassemble, fill and place a drop or two on the coil and you're ready to vape again.
 

Stef64

Ultra Member
ECF Veteran
May 5, 2011
2,047
1,223
Michigan
I have never used the ones from Volcano, but the best I can tell they might be an older version (Rev. 5?). They look like they have clear tubes and if that is the case they will crack and leak. The tube on the Ultimates are more translucent than transparent. You really want the Ultimates. The tubes on the Ultimates are made from a different type of plastic and will not crack.

You can clean CE2's many times. I clean mine every couple of days, whenever the flavor diminishes or they taste burnt. It only takes a couple of minutes.
 
Status
Not open for further replies.

Users who are viewing this thread