Opinions and Advice Please

Status
Not open for further replies.

mkscr

Full Member
ECF Veteran
Apr 27, 2009
46
4
Phoenix, AZ
Okay, I realize this is such a noob question. I have a 510 and I love it with the exception of the darn batteries dying out so quickly.

I've come to the conclusion I need to get a mod of some type. I am NOT mechanically inclined in the least. I've been told not to get near a screwdriver so I wouldn't get hurt. LoL

My question is this: What is the "best" mod for me? Simple to use, no muss, no fuss, and no "fiddling around" with it to get it to work correctly. The most important consideration is battery usage time.

Thanks to all in advance. :confused:
 

Kattdaddy

Unregistered Supplier
ECF Veteran
I researched a great deal before I got mine. Battery was my first approach because I was a heavy analouge smoker. I would recommend the screwdriver .... It was produced simply because heavy smokers had a problem running through batteries constanly. Most E-cigs run off of a 150 MaH battery and this one runs off of a 900 hundred MaH battery.
I don't know how you feel about having to have your e-cigarette look like a cig.. but this does closely resemble a screwdriver.. but a very comfortable one. They also eliminate run time by having a push button operation.. so, some of the autos react to simople vibration and run your batteries down. This problem has been addressed by using the button to operate the battery.
It runs using a DSE 901 atty... making it virtually easy to resupply as needed with filled cartridges or blanks that can be refilled.
Naturally, batteries have to be replaced from time to time.. so, the starter kit comes with two atties, two batteries, battery charger, the screwdriver itself, and 10ml starter bottle of 24 mg nic. I got mine from E-wicked and have had no problems with it, at all. Turn key right out of the box and my battery usually last for six to eight hours depending on how much I use it. The owner manual states that batteries would probably need to be changed out every eight to twelve months. These batteries can be purchased from radio shack or places like that rather than having to pay the cost to an e-cig company. Real easy... and not a headache to operate. Let me know if this helps and If you do get a screwdriver, I am sure you would be pleased with the throat hit and plenty of vap...
Sincerely,
Tom:evil:
 

Walrus

Ultra Member
ECF Veteran
Mar 3, 2009
2,244
15
Baton Rouge, LA
If your primary concern is battery life, look for mods that will use an 18650 battery. I personally use a Prodigy with 510 adapter (3.7v switch), and use 3000mAh 18650's.

I believe Puresmoker is up in the air as to whether they are going to continue to make the Prodigy that accepts the 18650, but you can sometimes find them in the classifieds. Any of the existing ones can use this battery... not sure about the "new" design, as they haven't decided yet.

I'm sure there are other mods out there that accept this battery and will let you continue to use 510 atomizers.
 

quasimod

Ultra Member
ECF Veteran
Oct 19, 2009
2,404
50
62
Joplin, MO - USA
... no muss, no fuss...The most important consideration is battery usage time...

If you spend a lot of time near a power source, you may be happier using a "USB Bypass" instead. That way you can save your batteries for when you are away from home/work/car. They are much cheaper than the big-battery mods. Plugs into your USB port on your computer or laptop. Adapters for the wall socket or your car cigarette lighter. Just plug it in and it works. No muss, no fuss.
 

JustJulie

CASAA
Supporting Member
ECF Veteran
Verified Member
Jan 30, 2009
2,848
1,393
Des Moines, IA
There are so many choices out there, and I think the best alternative would be to meet up with some local vapers and see what they've got. One of the coolest things about local vaping groups is the ability to test drive new toys.

VIP - Vaping in Phoenix - e-cigarette-forum.com • The place for electronic cigarette reviews, news and chat

Basically, there are many choices, and each one has strengths and weaknesses.

For example, you could start using a mega 510 battery. As VaporHead4Life said, some folks are finding the extended battery life more than acceptable.

Or you could move into the wonderful world of battery holders a/k/a mods. If you want to stick with a 510 atomizer, I personally find that a 510 atomizer works beautifully at 3.7 volts. There are many mods out there that will accommodate the 510 at 3.7 volts, some of which are dedicated 3.7 devices (e.g., the Protege is 3.7 period), and others which can vape at 3.7 or higher depending on the battery configuration that you use (e.g., the Xhaler).

Lots and lots of choices out there, and everybody has their personal favorites. That's why it's so nice to be able to see some different devices in person and try them for yourself. :)
 
Status
Not open for further replies.

Users who are viewing this thread