RDA Origen Little 16mm Clone
- Thread starter Burnie
- Start date
- th_trl_thread_readers 0
- Status
I use 300 grit emery cloth for grub screws. Wet/Dry paper is a good alternative too. I place the emery cloth on a flat surface and move the screw across the abrasive; first with the screw pointed straight down, then tilted at a 45° angle to slightly chamfer the edge.
You're talking about the Origen Little Tiny Tank 16mm? I have 4 from FT. Had them about 5 days now and can't put them down. They are brilliant. LOVE these tanks - so much so I ordered 6 more. I don't share and hubs has developed a fondness for them as well.My 0-16 clone finally came in at my local b&m. Unfortunately they ordered the tank instead of the rda.Doesn't matter anyway, the machining was absolute crap. The worst I've ever seen on a topper.
Yeah the 16mm tank. Not sure where the b&m got it from, he said it wasn't from FT.
I couldn't bring myself to buy it, super rough threads and chimney bore, wobbly tank and poor over fit and finish. Absolute junk.
Glad to hear the O-16 tanks from FT are good though.
Not sure where they got it from, but my O16's from FT & FC are good and the O16 Tank from FT was good. There are a lot of clones out there, some are good, some not so much. After CNY, order one from FT, it's only about $10.My 0-16 clone finally came in at my local b&m. Unfortunately they ordered the tank instead of the rda.
I'm liking the ShenRay version.
Shipped w/BF pin installed.
Origen Little Style Bottom Feeding 316SS Atomizer with Beauty Ring by ShenRay - Silver
Shipped w/BF pin installed.
Origen Little Style Bottom Feeding 316SS Atomizer with Beauty Ring by ShenRay - Silver
I agree,that's why when i bought a 2nd one,i decided to stick with them since my first one was so nice.ShenRay does do a good Clone.
I've scored the RDA and the Tank from FT. REALLY like them both. No beauty ring, but no biggie for me. They look good with the beveled edges of my P2.5s. Just popped the RDA on a DripBox60, and I like the look
Question about the tank model??
I have 2 of the BF model and they are great
I just got the one with the tank on top and using it as a RBA but it seems to have a ramp up time of about 2 seconds
Tried many wicks and wattage's but same result.
Any idea's?
Thanks in advance
I have 2 of the BF model and they are great
I just got the one with the tank on top and using it as a RBA but it seems to have a ramp up time of about 2 seconds
Tried many wicks and wattage's but same result.
Any idea's?
Thanks in advance
Question about the tank model??
I have 2 of the BF model and they are great
I just got the one with the tank on top and using it as a RBA but it seems to have a ramp up time of about 2 seconds
Tried many wicks and wattage's but same result.
Any idea's?
Thanks in advance
What kind of build? I'm just running 28g NiCr80 - about 7 wraps - 1.2Ω I'm not having any issue (or maybe I am, but it's not bothering me)
ETA - I'm running about 15-ish watts....
Thanks
Tried a similar build and also a 26g 5 wraps
Same result
I wonder if 26g SS is too much? I don't expect to chuck clouds with this topper. More of a Tootle Puffer....
28g SS cold resist 1ohm or so...but I am using a Provape-1 (14500).
I love it.
Now when I put the tank on my Provari 2.5 there is an obvious difference - even my Silver Bullet that's 18650.
I love it.
Now when I put the tank on my Provari 2.5 there is an obvious difference - even my Silver Bullet that's 18650.
- Status
