P10 or P16 or P18

[Teo]

Hello David and the Prestigious Owners of the P-16 and P-18's.

This is the ONLY extremely small issue to date with my P-18: When standing my unit on end (the button side down) and fully locked and loaded! All need to make sure your unit is NOT firing? I had mine standing up for 10 minutes while eating the other day and YES! it became very hot around the atty and fitting. The simple fix is to remove the brass washer from under the negative connector, IF you experience this also? This unit is Wayyyy too Precision(the benchmark for ALL others) and most assuredly worth the price!

Thanks David and BRAVO - GREAT Design!

 

[Switched]

Hello David and the Prestigious Owners of the P-16 and P-18's.

This is the ONLY extremely small issue to date with my P-18: When standing my unit on end (the button side down) and fully locked and loaded! All need to make sure your unit is NOT firing? I had mine standing up for 10 minutes while eating the other day and YES! it became very hot around the atty and fitting. The simple fix is to remove the brass washer from under the negative connector, IF you experience this also? This unit is Wayyyy too Precision(the benchmark for ALL others) and most assuredly worth the price!

Thanks David and BRAVO - GREAT Design!

That happened to me as well but only with the LifePO4 batts. I removed the spacer.

 

[Teo]

That happened to me as well but only with the LifePO4 batts. I removed the spacer.

And I forgot to add it is with the AW 18650 batteries. I have not yet tried it with any others. Maybe another o-ring is needed? But then the atty cap would become too tight when completely screwing it down.

 

[forcedfuel50]

And I forgot to add it is with the AW 18650 batteries. I have not yet tried it with any others. Maybe another o-ring is needed? But then the atty cap would become too tight when completely screwing it down.

Nope, you did the right thing by removing a washer...when you remove washers it increases the distance you have to depress it, which makes the switch have to go father below the protective horns to fire and makes it much more difficult to accidentally fire. Some like a hair trigger though so one need only add washers for that effect.

 

[grimmer255]

On my S6 I like the Hair trigger but I'm finding that I actually like the way the P16 came with the button having to go just below the horns.

 

[thewomenfolk]

What Grimmer said....yes, and then the horns don't get in the way of pushing the buttons. That's how mine are set up too and it's perfect. It can misfire in my pocket but doesn't in my purse.

 

[Switched]

Nope, you did the right thing by removing a washer...when you remove washers it increases the distance you have to depress it, which makes the switch have to go father below the protective horns to fire and makes it much more difficult to accidentally fire. Some like a hair trigger though so one need only add washers for that effect.

David,

Some other units may call them washers but on the Precise there are known as spacers or shims

 

[grimmer255]

i like shims......... hey switched looks like you switched pics... lol sorry I just couldn't help myself.

 

[dk2]

@ switched when are you going to do a follow up review of the precise?

 

[Switched]

i like shims......... hey switched looks like you switched pics... lol sorry I just couldn't help myself.

Yup! by popular demand

 

[Switched]

@ switched when are you going to do a follow up review of the precise?

In all honesty there is nothing to follow up But in 2-6 weeks. I believe putting a PV through its paces before following up. I had a battery run last night that was avoided... with LifePo4s nonetheless

 

[grimmer255]

Yup! by popular demand

lol yea I noticed in the video, with you at the vapors meeting, that the guys kept on saying "Polar Bear" so how is your P18 treating ya?

 

[Switched]

No complaints Haven't cleaned it yet and I don't plan cleaning it until I have to. I want to see the longevity between clean cycles I've been using primarily as a 3.7V device.

 

[gtxsliarmor]

If I read David's post on the 18th right He said about an in. of polishing and some 18650 and ready to ship. Is that right David?

I got My AW Batteries at 14.99 per. I just got two that should be fine for now I would think.

I believe I got two adapter's coming also 510-901 and 510-801 I have never used a 801 all I know is there are big. any of You guys know how many drop's to fill a 801.

Thank You,

Don Swad

 

[atavanhalen]

If I read David's post on the 18th right He said about an in. of polishing and some 18650 and ready to ship. Is that right David?

I got My AW Batteries at 14.99 per. I just got two that should be fine for now I would think.

I believe I got two adapter's coming also 510-901 and 510-801 I have never used a 801 all I know is there are big. any of You guys know how many drop's to fill a 801.

Thank You,

Don Swad

If you are dripping on an 801 it is roughly the same as a 510, 3 drops or so. If you are talking about a cart then I have no idea(only use at HV)
I believe the p16 and p18 only come with one adapter of your choice.
David said he had about an inch left of polishing on some of the p18s but that does not necessarily mean that ours are the ones he is referring to but I hope he was.

 

[Vaporologist]

If I read David's post on the 18th right He said about an in. of polishing and some 18650 and ready to ship. Is that right David?

I got My AW Batteries at 14.99 per. I just got two that should be fine for now I would think.

I believe I got two adapter's coming also 510-901 and 510-801 I have never used a 801 all I know is there are big. any of You guys know how many drop's to fill a 801.

Thank You,

Don Swad

Hey Don,

801 atties are juice tanks and are a lot more forgiving when dripping. You will need to add between 6-8 drops to prime it where in 510s and 901 you would usually add about 4 drops. When it's time to add more drops, 3-4 will usually get the job done.

 

[Switched]

Hey Don,

801 atties are juice tanks and are a lot more forgiving when dripping. You will need to add between 6-8 drops to prime it where in 510s and 901 you would usually add about 4 drops. When it's time to add more drops, 3-4 will usually get the job done.

... plus

20-22 drops to fill a cart if you are not dripping.

 

[grimmer255]

Right now I'm using cartomizers...... dripping is great but it can be a pain sometimes depending on the tasks at hand. But once the Juice Feeder is finally released the cartomizers may be limited to only driving or going out.... or altogether banned from my supplies...

 

[dk2]

I'm a huge kr808d carto user but a juice fed system is certainly intriguing. I tried the E2 carto's and they are just not there yet too many glitches. I Like the fact that David is working on a system that is new.