Parkes Vaping site finally up!

Status
Not open for further replies.

Sallana

Vaping Master
ECF Veteran
Verified Member
Jan 4, 2010
3,820
704
37
the North Pole
www.lynnekirsch.com
Fuzzy Navel jumped into my top 5 favorites of all time with a truly magnificent taste that I can't place. Honestly, I've never even had a Fuzzy Navel. But the taste is VERY familiar. I will place it soon. But my first thought is... Tang?? I haven't had that since I was 7 so I'm not sure :p It doesn't feel right. Doesn't give me that "Yes! That's it!" feeling. But it's totally something familiar... Some kind of orangey candy that eats like sweet tarts but isn't sweet tarts.. lol.

Peanut Butter Cookies is the first peanut butter vape I have ever had that actually tasted like peanut butter and not motor oil. Very good.

Buttery Nipple I dunno, I'll let it sit. Sort of doesn't taste like anything at the moment.

Cinnamon Danish is very similar to the Vacinna Roll but without that icing flavor to it.

And last but not least... my new favorite flavor : Blackberry Cobbler!! Absolutely amazing, guys!! It's a sweet blackberry, not natural. So if that's a turn off I wouldn't get this juice. It's like blackberry candy, and it's DELICIOUS! The same sort of blackberry flavor you find in various venders takes on Blackberry Brandy.. And the cobbler part is every bit as promising as you can hope for. Yummy buttery flakey sweet yum! :D I've been vaping it all night and when hubby came in he was like "Holy crap what are you vaping? That is amazing!"

Parkes Vaping has many uses. Quit smoking with juice that will never disappoint your throat. Satisfy that sweet tooth with juice that is so sinfully delicious you'll swear it has calories. And lastly, fragrance your house. Never buy air fresheners again!


The above is the script to your first commercial. You're welcome ;)
 
Last edited:

Krispers

ECF Guru
ECF Veteran
Verified Member
Nov 22, 2010
10,035
12,716
44
Pennsylvania
Fuzzy Navel jumped into my top 5 favorites of all time with a truly magnificent taste that I can't place. Honestly, I've never even had a Fuzzy Navel. But the taste is VERY familiar. I will place it soon. But my first thought is... Tang?? I haven't had that since I was 7 so I'm not sure :p It doesn't feel right. Doesn't give me that "Yes! That's it!" feeling. But it's totally something familiar... Some kind of orangey candy that eats like sweet tarts but isn't sweet tarts.. lol.

Peanut Butter Cookies is the first peanut butter vape I have ever had that actually tasted like peanut butter and not motor oil. Very good.

Buttery Nipple I dunno, I'll let it sit. Sort of doesn't taste like anything at the moment.

Cinnamon Danish is very similar to the Vacinna Roll but without that icing flavor to it.

And last but not least... my new favorite flavor : Blackberry Cobbler!! Absolutely amazing, guys!! It's a sweet blackberry, not natural. So if that's a turn off I wouldn't get this juice. It's like blackberry candy, and it's DELICIOUS! The same sort of blackberry flavor you find in various venders takes on Blackberry Brandy.. And the cobbler part is every bit as promising as you can hope for. Yummy buttery flakey sweet yum! :D I've been vaping it all night and when hubby came in he was like "Holy crap what are you vaping? That is amazing!"

Parkes Vaping has many uses. Quit smoking with juice that will never disappoint your throat. Satisfy that sweet tooth with juice that is so sinfully delicious you'll swear it has calories. And lastly, fragrance your house. Never buy air fresheners again!


The above is the script to your first commercial. You're welcome ;)

I think you were paid for those reviews :p
 

Swigger14

Senior Member
ECF Veteran
Verified Member
Sep 13, 2011
257
521
Boston
Morning everyone!

Got my first package from Parkes yesterday. Great shipping time. Was excited to try out tanks for the first time.

Let's just say my first time was, well, messy. I filled a syringe with my favorite liquid, and followed the directions on the web site. I had a heck of a time getting it through, and am pretty sure I was piercing the grommet. Got it filled, though. Filled the carto, let it sit for a couple minutes, and tried connecting it. The slightest bit of pressure moved the grommet through the cylinder and juice everywhere. I really tried to be gentle, but how gentle do you have to be?

Now, at this point I'm not sure the tank is at all usable, but decided to try once more. I had a tough time finding where the grommets are supposed to be inside the cylinder, but I did my best. Put the syringe in (again scratching the grommet), added some juice, and this time the tank collapsed in my hand while pulling out the syringe?

What am I doing wrong? All the parts are currently apart and lying separately on the table - is the tank done once it gets to this point?

Sorry, just trying to figure out how to work these things.

Also got three juices, but haven't tried them yet. Will let you know my thoughts.

Thanks!
 

Krispers

ECF Guru
ECF Veteran
Verified Member
Nov 22, 2010
10,035
12,716
44
Pennsylvania
Morning everyone!

Got my first package from Parkes yesterday. Great shipping time. Was excited to try out tanks for the first time.

Let's just say my first time was, well, messy. I filled a syringe with my favorite liquid, and followed the directions on the web site. I had a heck of a time getting it through, and am pretty sure I was piercing the grommet. Got it filled, though. Filled the carto, let it sit for a couple minutes, and tried connecting it. The slightest bit of pressure moved the grommet through the cylinder and juice everywhere. I really tried to be gentle, but how gentle do you have to be?

Now, at this point I'm not sure the tank is at all usable, but decided to try once more. I had a tough time finding where the grommets are supposed to be inside the cylinder, but I did my best. Put the syringe in (again scratching the grommet), added some juice, and this time the tank collapsed in my hand while pulling out the syringe?

What am I doing wrong? All the parts are currently apart and lying separately on the table - is the tank done once it gets to this point?

Sorry, just trying to figure out how to work these things.

Also got three juices, but haven't tried them yet. Will let you know my thoughts.

Thanks!

Not much I can say...I never had a issue except me purposely piercing the grommets....but my tube has a umm lip on each side that fits perfectly into the groove of the grommet.
 

Swigger14

Senior Member
ECF Veteran
Verified Member
Sep 13, 2011
257
521
Boston
Not much I can say...I never had a issue except me purposely piercing the grommets....but my tube has a umm lip on each side that fits perfectly into the groove of the grommet.

Thanks Krispers. Hmm, I'll have to look for a lip to know where the grommet should lie, but I was definitely looking yesterday and it seemed to be perfectly flat.
 

Krispers

ECF Guru
ECF Veteran
Verified Member
Nov 22, 2010
10,035
12,716
44
Pennsylvania
Thanks Krispers. Hmm, I'll have to look for a lip to know where the grommet should lie, but I was definitely looking yesterday and it seemed to be perfectly flat.

Feel the inside of the tube for the lip...its the very ends. So, the end if the tube should be in the groove so that one half of grommet should be in tube and other half outside tube and the groove should line with the edge of tube
 

BiancaMontgomery

SQUIRREL!
Supporting Member
ECF Veteran
Verified Member
Jan 27, 2010
13,516
8,065
North Carolina
Hahaha, too late! Squirrel and Child are sleeping, only time I can get anything done! Video is uploading to youtube now. I'm sure it's insanely out of focus, but I hope it's clear enough to get the jist of what to do...or at least what *I* do to fill my own Chibi's. :) Link soon.
 

carpedebass

Ultra Member
ECF Veteran
Verified Member
Jul 10, 2011
2,168
1,500
56
The Alamo City
One other thing...is there a way to mod the Shine so we can remove the on/off switch and allow it to sit on a desk or table with the tank up? Just curious...I never pocket my PVs.

It may not look to pretty but you can pop the black rubber cover off grab the white button with a pair of pliers and break it off.

Bill, I'm back to wanting to make my Shine stand and removing the button. Mine doesn't have a white button...it has a black button...but do you think it would hurt it to just pull the button out completely? Not the whole button assembly...just the button itself...
 
Status
Not open for further replies.

Users who are viewing this thread