Passthru mod

[Jules22871]

I did a search and after going thru several pages of it I didn't find what I'm looking for. I am tired of paying high prices for a passthru that works a few days then quits. I want to make one myself then the only person I can be mad at is me.

You all are great and I know that more than one of you have made a passthru yourself. Please share the info with me! I am desperate at this point for a good passthru so I can quit worrying about batteries. I already have plans to make the nicostick but I want to do a passthru as well.

Thanks in advance!

 

[LuckySevens4U]

Buy a PS manual passthrough. I think these will really hold up for a long time. They sound like MUCH better quality.

 

[MonkeyMonk]

Message Nerf he does live on line tutorials. He can tell you when his next one will be. I've been hoping to catch one, but every time he is scheduled to be on something keeps me away from the computer. Maybe we should ask him to make us a CD disc, then we would have it for reference, too.

 

[Jules22871]

Buy a PS manual passthrough. I think these will really hold up for a long time. They sound like MUCH better quality.

The last 2 I had were manual. One lasted a day, the other a week. That does not make me happy at all. I need something that I know I can count on.

Message Nerf he does live on line tutorials. He can tell you when his next one will be. I've been hoping to catch one, but every time he is scheduled to be on something keeps me away from the computer. Maybe we should ask him to make us a CD disc, then we would have it for reference, too.

Thanks for that. I'll message him. Maybe he could do it on youtube or some other video sharing site. I probably would have a hard time catching a live one also.

 

[LuckySevens4U]

Yes, but have you looked at PS's. They are sealed and they have a much stronger wire and parts. They look like they are going to be very good quality. That's all I'm saying. I'm sick of the China ones also!

 

[Moonlighter]

I did a search and after going thru several pages of it I didn't find what I'm looking for. I am tired of paying high prices for a passthru that works a few days then quits. I want to make one myself then the only person I can be mad at is me.

You all are great and I know that more than one of you have made a passthru yourself. Please share the info with me! I am desperate at this point for a good passthru so I can quit worrying about batteries. I already have plans to make the nicostick but I want to do a passthru as well.

Thanks in advance!

What kind of e cig and pass through are you using?
Are they breaking while connected to your computer USB?
or a power pack?

(I only have one and now you're scaring me cause I love this thing)

 

[Moonlighter]

Buy a PS manual passthrough. I think these will really hold up for a long time. They sound like MUCH better quality.

What's the PS stand for Lucky? I can't figure it out....

 

[Kewtsquirrel]

How are they breaking? I've made a dozen manual passthrus for myself and others and haven't had a single failure or complaint yet.

Details please, type of failure, where you got it, etc, etc.

 

[LuckySevens4U]

What's the PS stand for Lucky? I can't figure it out....

PureSmoker.com - Your #1 Source For PV's, Parts, & Accessories! they have some just released made stronger and better and made in the USA. Manual and sealed.

 

[Jules22871]

What kind of e cig and pass through are you using?
Are they breaking while connected to your computer USB?
or a power pack?

(I only have one and now you're scaring me cause I love this thing)

How are they breaking? I've made a dozen manual passthrus for myself and others and haven't had a single failure or complaint yet.

Details please, type of failure, where you got it, etc, etc.

I'm not sure what in them is breaking. The first one did great the day I got it. When I was ready for bed I unplugged it from my atty and computer. The next morning when I hooked it all back up it would light up, without me actually drawing on it, I was just holding it. Stay lit for a few seconds, then flash a few times and start the cycle all over again. The second one, at about a week old, did the same thing. BTW, these are the manual push button ones.

Nerf, if you could please tell me how to make one I would be the happiest lady in Tennessee. I'm disabled and I don't get up and get around much so I'm in front of my computer most of the time I'm awake and I am really tired of batteries. I want a passthru that will hold up and keep me off analogs. My health really can't take me going back to analogs.

 

[Kewtsquirrel]

$35? lol, well, good luck to em.

 

[Jules22871]

PureSmoker.com - Your #1 Source For PV's, Parts, & Accessories! they have some just released made stronger and better and made in the USA. Manual and sealed.

If I can't figure out how to make one that looks like the place to go to buy one. Thanks to all that posted about them!

 

[LuckySevens4U]

$35? lol, well, good luck to em.

Why it will outlast by many times those China ones you are paying $18 a piece for. You'll be money ahead in the long run.

 

[Jules22871]

$35? lol, well, good luck to em.

Yeah, I didn't see the price tag. There is no way I can afford that for three people.

Nerf, it's back to you. Can you please show/tell me how to make one myself?

 

[ImYourSalt]

$35, yeah... but if it works, it's worth every penny. The thing looks gorgeous anyway! What's the voltage on that bad boy? Does it differ from the other ones on the market?

I just ordered a passthrough from Chris at CigTechs, and will probably post an update once i give it a once over.

It's $20, not sure of the warranty, but he, as as-of-yet, has provided wonderful customer service, and even gave me his personal number. Check out the coupon code thread for an even better deal!

Salt

 

[Kewtsquirrel]

Why it will outlast by many times those China ones you are paying $18 a piece for. You'll be money ahead in the long run.

Except I don't pay $18 for chinese ones, I make them, and sell for quite a bit less than that with the same warranty, $35 is laughable.

 

[Jules22871]

All I have to say is this forum and the people here are wonderful! Thank you so much for helping me!

 

[Moonlighter]

Except I don't pay $18 for chinese ones, I make them, and sell for quite a bit less than that with the same warranty, $35 is laughable.

I'm waiting here to see what you charge to make 901 pass throughs??
or do you only make certain types?

 

[MonkeyMonk]

Moonlighter, just message Nerf and he'll be able to assist you. He a great guy and super helpful in so many areas.

 

[Kewtsquirrel]

I'm waiting here to see what you charge to make 901 pass throughs??
or do you only make certain types?

I try my best not to advertise on the forums moonlighter, PM me and I'll be more than happy to give you details, but I do my best to respect the ECF and keep my posts related to mods and teaching people how to make them.

Yes, I know its stupid that I teach people how to make the things I sell, I'm horrible at business.