PCC issues

[rocks82]

Anyone have any issues with their PCC unit? The first 2 days, it worked great.... but now I plug the case in (without a battery) into my pcc and that part is fine, but when it's all charged and I plug a battery into it? Nothing. No lights. No charging. Nothing.

 

[Sun Vaporer]

Anyone have any issues with their PCC unit? The first 2 days, it worked great.... but now I plug the case in (without a battery) into my pcc and that part is fine, but when it's all charged and I plug a battery into it? Nothing. No lights. No charging. Nothing.

Rocks--this is a common issue---take a q-tip and clean down in the hole where the battery goes on the bottom as it can get gunked up and a connection is not made when you place a battery in that hole. Also push down on the battery manually to make sure the top lid is pushing it down far enough.

Edit--wrong type--this advise would be for the 510!!
Sun

 

[JenJen]

Rocks--this is a common issue---take a q-tip and clean down in the hole where the battery goes on the bottom as it can get gunked up and a connection is not made when you place a battery in that hole. Also push down on the battery manually to make sure the top lid is pushing it down far enough.


Sun

I think this reply might be regarding the 510 PCC? The VK PCC screws in and the top lid does not push down on the battery to initiate contact.

It could be that the battery you are trying to charge is totally dead. Try screwing it in and leaving it in. It may after a bit of time show a battery charging light (This happens to me all the time since I don't notice that the batt is getting low and vape it until it gives the blinks of death sign and dies completely! lol) If not, let Steve know.

 

[Scottbee]

But...... it's still a good idea to check the connections and make sure they aren't covered in e-liquid. It can be an insulator and stop the battery from making connection. A Q-tip on both the battery and the PCC receiver should take care of the problem.. if that's what it is.

 

[Sun Vaporer]

I think this reply might be regarding the 510 PCC? The VK PCC screws in and the top lid does not push down on the battery to initiate contact.

Jen --it is --My mistake---so just ignore it!!!


Sun

 

[JenJen]

Jen --it is --My mistake---so just ignore it!!!


Sun

No worries! It is probably a good idea to make sure the connection is clean.