I saw it was real good. I laughed almost busted a gut when they announced they stopped traffic for a few hours do to someones e cigarette.
Penelope
- Thread starter hifistud
- Start date
- th_trl_thread_readers 0
- Status
Yes, that works very well - and it fixates the wick during the process of assembling the whole thing so that the coil does not get pulled away when you do the positive side. Only need a finger to hold the wick+NR wire in the metal channel. Hard to describe, does it make sense?
Ok, So I got my Penelope today!! And it is my first re-buildable, I used the premade wire(only enouph for one coil) Yikes.. So I wrapped it with the supplied wick and it came in at about 1.7ohm. Surprised I didn't mess it up!!! Lol, anyways this thing is really nice and I'm just getting used to the juice control. Was I supposed to get more than 1 small piece of wire for one coil? I have some resistance wire on order from EBay and still have to find some nr silver...
View attachment 115001
Thanks Imeo and the COV team!!!
View attachment 115001
Thanks Imeo and the COV team!!!
Got my Penelope this morning, and I must congratulate you Imeo on another truly stunning device, like all your products, they are far more beautiful in the flesh, love the weight, style, feel and importantly the way it performs.
Thank you so much again Imeo, looking forward to the proteus too
Thank you so much again Imeo, looking forward to the proteus too
I got my Penelope today! you are a true artist Imeo! Thank u so much M8!
"My 4 Blings"
"My 4 Blings"
I drip enough juice everywhere to lube everybody's o-rings!!! It literally was as I said - straight out of the envelope, and I just switched the cameras on and went for it. Otherwise, it'd have been much slicker!! Rest assured, my rings are now nicely lubed!!! (and I'm just under 20 mils through Penny now - nice!!)
Got mine in today as well! I ordered this along with an Ody but I haven't set that up yet so this is my first time using a rebuild-able. I couldn't really get a feel for its size from the pictures so when I got it in hand I was surprised at how small it is. Real sleek looking! Loving the flavor and TH so far. Beautiful work Imeo!
I got mine today from Ecigz and as everyone says boy this thing looks far better in the flesh and is that bit smaller than an Odysseus that it is perfect on everything that an Ody is a bit large for.
Vape wise? WOW!! as Dave says in the vapourtrails video this thing really kicks out the vapour! I have it at the minute on a Touchwood Mini which is standard 3.7 voltage and it absolutely rocks! I own a certain Genesis type attie that is known as the best hitting Genesis type attie and the Penelope is easily on a par with it AND it has the advantage of absolutely NONE of the wicking issues that gennies can suffer from and it doesnt have that stupid air hole in the side that I HATE because to me that shows a lack of design and is an easy solution and the air hole leaks where the Penelope will be like my Ody which doesnt leak a single drop ever! and the Penelope is cheaper!!
I love it Imeo, you hit a home run with the Odysseus and with Penelope you have shown that nobody out there is even close to you in designing atties. All those other gennies etc are just a tube with a couple of holes on the top, thats it! nothing more where Penny is pure design genius, I hate using that word as its used too often these days but this design really is pure genius.
Vape wise? WOW!! as Dave says in the vapourtrails video this thing really kicks out the vapour! I have it at the minute on a Touchwood Mini which is standard 3.7 voltage and it absolutely rocks! I own a certain Genesis type attie that is known as the best hitting Genesis type attie and the Penelope is easily on a par with it AND it has the advantage of absolutely NONE of the wicking issues that gennies can suffer from and it doesnt have that stupid air hole in the side that I HATE because to me that shows a lack of design and is an easy solution and the air hole leaks where the Penelope will be like my Ody which doesnt leak a single drop ever! and the Penelope is cheaper!!
I love it Imeo, you hit a home run with the Odysseus and with Penelope you have shown that nobody out there is even close to you in designing atties. All those other gennies etc are just a tube with a couple of holes on the top, thats it! nothing more where Penny is pure design genius, I hate using that word as its used too often these days but this design really is pure genius.
do you have to use 3mm wick for the penelopy? or can i compensate and use 2 of the old oddy wicks side by side? any thoughts?
thanks in advance
thanks in advance
3mm wicks works very good on Penelope, but you can definitely use different sizes and combinations.
2mm + a piece of 2mm (just as long as the ceramic)
2X1.5mm
Even 3mm+a piece of 1.5mm, if you are in low ohms and you want good juice flow.
The list is endless, and Penelope won't complain
2mm + a piece of 2mm (just as long as the ceramic)
2X1.5mm
Even 3mm+a piece of 1.5mm, if you are in low ohms and you want good juice flow.
The list is endless, and Penelope won't complain
3mm wicks works very good on Penelope, but you can definitely use different sizes and combinations.
2mm + a piece of 2mm (just as long as the ceramic)
2X1.5mm
Even 3mm+a piece of 1.5mm, if you are in low ohms and you want good juice flow.
The list is endless, and Penelope won't complain
Thanks bud
Got mine from Golden Greek London yesterday, really like the look and size. The premade wire did not hold together as I wrapped the wick, but as I have a shed load of wire it was not a major issue. I made a coil as I would for the Ody and it came out at 1.4. Performance is great, flavour, vapor and throat hit (better than the Ody by a little). Happy Days!!
I'm in love
Thank you for your amazing work and thank you to the team at cov for getting it out quickly.
I am so shocked at how high you can run this. I think I've gotten to 15 watts been through 6mls and not one dry hit. Amazing. And such a smooth strong hit.
Again I am in love.
Thanks so much
Ben
In the ody I use 1 length of 2mm and 1 length of 1mm wick with an extra small section of 2mm wick as a buffer. The coil is actually wound around 5mm of wick in all and it performs fantastically, I do exactly the same for the penelope.
Last edited:
I used the 3mm wick doubled up under the coil. So 3 down the sides six in the middle. Vaping like a champ. I'm going to play around with different ways tho.
I am so glad to see you posting your impressions wyrm and much more glad that you like Penelope! Thanks a lot for your very kind words
Got my Penelope this morning, and I must congratulate you Imeo on another truly stunning device, like all your products, they are far more beautiful in the flesh, love the weight, style, feel and importantly the way it performs.
Thank you so much again Imeo, looking forward to the proteus too
- Status
