Phoenix clone orings?

[unloaded]

Anybody have any leads for a proper sized oring to go on a Phoenix base? I'm not having leaking issues, just not getting the tightness wanted when lining up the air hole with the coil. The Trivecca from okcvapes.com came with two clear silicone rings that help but if they were just a hair thicker would be perfect. If someone could point me to the right ones or give me the size needed I'd appreciate it.

 

[xLowEndx]

I use drip tip o-rings from madvapes.

 

[skizif]

I used one from a broken drop tip and it worked perfectly

 

[Infinite]

There is a thread that describes how to remove the top price allowing for actual adjusting of the air hole. Basically if u have an ego, you can screw the top of the Phoenix to the ego and gently pry the top from its screw base. Simply adjust and push back on! Best method yet. For more details do a search for it here on the forum.

I hope that helps

 

[j4mmin42]

I use drip tip o-rings from madvapes.

I used one from a broken drop tip and it worked perfectly

If you have some of those cheap, black plastic drip tips that you're never going to use, take the o-ring and carefully stretch it over the base. It'll look like it's too small to fit, but it will.

 

[unloaded]

Thanks guys. I'll try to pull the threads out. Hope I don't pull the wife's eGo in two.