Phoenix Rebuildable Atomizer Help!

[Diagasa]

I just got my Phoenix and the the stock coil was awful. Not a problem because I bought two feet of wick and wire so I wrapped a new one.

I have it set up with a 4 wrap coil running at 1.4ohms.
I'm using Boba's Bounty. I tried a 70/30 juice with the same end results...
I'm running it between 3.5 and 3.8 volts. I tried running it at 4.2 but it gave an even harsher throat hit.

I'm getting piddly vapor production with a monstrous throat hit.
I've tried rotating the air flow hole in all directions.
I've also tried partially blocking the airflow hole on my body sleeve.

Can anyone suggest a little help? I've been running this coil for about four and a half hours with no change in performance. I know how to build coils and how to properly set this device up but I'm getting terrible performance.

Please someone with a little advice chime in...

I went and rewatched Scott's (Igetcha69) video on youtube and I followed his instructions to a T.

Thanks,
D

This would be the perfect stealth device but the instant coughing fit would cause people to stare...

 

[yuttynutt]

In the juice well see if it is full if it is i stick a qtip in it and get some out

Sent from my DROIDX using Tapatalk 2

 

[skizif]

Check to see if you have any hot spots on the coil too...my first rebuild was pretty bad and a hotspot was making it taste awful and harsh