phogen

[deezdrama]

Im not the first to make this, just posting some pics here that others have asked about.

 

[Mrephunk]

pretty fricking awesome. Now I want a tutorial Did you uses needles for the posts, and did you solder them

 

[max1965]

Tutorial by steeljan DIY Ego Genesis Tank Ecig Mod - YouTube

 

[Viper2377]

HAHA I came across some older lady the other day who posted a vid making one of these!!

 

[gtbb]

HAHA I came across some older lady the other day who posted a vid making one of these!!

Well you did manage to take notice that she is a lady. One most us of adore! REALLY

 

[deezdrama]

Yes,needles used for the posts, i made mine out of a bottom feeder so it was a little more difficult because the center positive post was not there to flatten and bend up along the side.

i used the solderless connection clips from a vision stone 3 innards set.

I did see steeljans vid, if someone links it here thats fine and will help others to build this. If anyone needs help doing a phoenix one ill do my best to help you, she used a different syle clearomizer.

these produce good vapor, but very warm vapor and potent, i got a buzz after a couple hits lol... the draw is very airy but i have an idea to fix this.

 

[deezdrama]

Just noticed her vid was already linked

 

[ED-209]

Darn, the Phoenix's I have are the smaller ones that don't come in the larger tank like the one in the pics but I think they still use the same bottom coil design, so very curious how you configured the bottom coil design into this type of genesis, I might be able to use one of my 6mL bottles or carto tanks for some type of makeshift genesis LOL.

 

[deezdrama]

I took the positive pin out, shoved a small silicone plug in it to stop leakage, i then pushfit a ss wire into the pos plug, the wire once it enters the tank is bent to the side to run up along the side of the tank, at the end of the ss pos wire is a crimp that holds the needle post.

the negative i used the compression ground ring clamp thingie from a vision stone innard,it too has a solderless connection crimp clasp for the neg needle post.

without the outer slide on tube u wont have a vape air chamber but could really use anything to rig one up to work, just wouldnt look as good.

the ego version of the phoenix has the outer sleeve tube and even a screw on penstyle cap to cover driptip and it was only like 9 bucks

 

[ED-209]

I took the positive pin out, shoved a small silicone plug in it to stop leakage, i then pushfit a ss wire into the pos plug, the wire once it enters the tank is bent to the side to run up along the side of the tank, at the end of the ss pos wire is a crimp that holds the needle post.

the negative i used the compression ground ring clamp thingie from a vision stone innard,it too has a solderless connection crimp clasp for the neg needle post.

without the outer slide on tube u wont have a vape air chamber but could really use anything to rig one up to work, just wouldnt look as good.

the ego version of the phoenix has the outer sleeve tube and even a screw on penstyle cap to cover driptip and it was only like 9 bucks

Thanks for the info, let's see what I can break, eh I mean come up with tinkering with what I got. Will probably order me one of those or one of those that Steeljan used to see if I can make one. Not sure why I am even messing with this since I have a G-Tank US coming and also in the Scuba Mini but like learning new things and looking for an excuse to get into modding

 

[RRoberts]

Thanks for sharing, That was cool and very innovative to say the least!

 

[WillyB]

Well lot's of good info info here.

There are many subtle and often frustrating aspects to getting the vape right.

http://www.e-cigarette-forum.com/forum/modding-forum/243494-my-cheap-version-line.html

Started long before it was Borged in that linked vid.