Pictures of your setup

[Paksoy]

My VTR holster ... holding on to obsolete gear actually pays off.

Old BlackBerry case re-purposed ... the swivel clip is a huge bonus.

 

[mrharvey34]

Best set up I have had. Wanting to start getting into coil building. Any tips for a newbie?


Sent from my iPhone using Tapatalk

 

[CrackerTeg]

Just upgraded from a vision spinner. Aspire bdc converted davide on MVP 2.0. Loving it!

 

[dvdgroover]

http://s546.photobucket.com/user/dvdgroover/library/incomming?sort=3&page=1
I post from my phone so photobucket link is much easier for me lol. I dont get offended so any critisism is welcome.

 

[roflwaffles]

This is the exact version clone I got but I bought mine from my local B&M. It's built very well just clean it before use and don't use the provided coil and wick.

Kayfun Lite Clone Rebuildable Atomizer RBA Adjustable Air Hole | eBay

Thanks! I've actually heard alot of mixed reviews about the Tobeco kayfun Lite; some people get a good quality device and others get trash I was looking into the Black Edition or the EHPro kayfun Lite Plus but I have heard good things about the Tobeco Kayfun Lite Plus at 101vape.


My friend is currently trying to convince me to get an Aqua clone right now though, I hear it's a "Kayfun Killer" but it's alot harder to build which is intimidating for me since I'm new to all of this lol.

 

[pastubbs]

Thanks! I've actually heard alot of mixed reviews about the Tobeco Kayfun Lite; some people get a good quality device and others get trash I was looking into the Black Edition or the EHPro Kayfun Lite Plus but I have heard good things about the Tobeco Kayfun Lite Plus at 101vape.


My friend is currently trying to convince me to get an Aqua clone right now though, I hear it's a "Kayfun Killer" but it's alot harder to build which is intimidating for me since I'm new to all of this lol.

Fasttech clone on the right, 101 vape clone on the left. I have some drop kits on the way for both of them but so far they both work great. 101 is a few buck more but worth it for faster shipping. Took a month and a half for fasttech and three days for 101 vape.

Fasttech clone on the right, 101 vape clone on the left. I have some drop kits on the way for both of them but so far they both work great. 101 is a few buck more but worth it for faster shipping. Took a month and a half for fasttech and three days for 101 vape.

 

[SimianSteam]

Thanks! I've actually heard alot of mixed reviews about the Tobeco Kayfun Lite; some people get a good quality device and others get trash I was looking into the Black Edition or the EHPro Kayfun Lite Plus but I have heard good things about the Tobeco Kayfun Lite Plus at 101vape.


My friend is currently trying to convince me to get an Aqua clone right now though, I hear it's a "Kayfun Killer" but it's alot harder to build which is intimidating for me since I'm new to all of this lol.

Aqua is definitely not a Kayfun killer. It's not bad, but it doesn't compare to the bulletproof design of the Kayfun. The Aqua is fiddly, the dual coil setup really doesn't improve the vape that much, and the juice control is pretty much useless. That being said, it's still a decent RTA, and looks sweet when combined with the Origin.

 

[Randizzard]

Fasttech clone on the right, 101 vape clone on the left. I have some drop kits on the way for both of them but so far they both work great. 101 is a few buck more but worth it for faster shipping. Took a month and a half for fasttech and three days for 101 vape.

Fasttech clone on the right, 101 vape clone on the left. I have some drop kits on the way for both of them but so far they both work great. 101 is a few buck more but worth it for faster shipping. Took a month and a half for fasttech and three days for 101 vape.

Ok so is the drop kit the "nano" kit? Or am I missing something? Also where do I get one because I have been hunting

 

[pastubbs]

Ok so is the drop kit the "nano" kit? Or am I missing something? Also where do I get one because I have been hunting

I got the tank from here: https://www.ultravaping.com/ProductDetails.asp?ProductCode=H-TA-KAYFUNTUBEN
they don't have the chimneys so its not realy a "drop kit" but I have some extra clear ones I got with the FT kit that I can dremel off a little bit to fit. I don't like the FT kit because the tank is wider then the device.

 

[floridaBMW]

Aqua is definitely not a Kayfun killer. It's not bad, but it doesn't compare to the bulletproof design of the Kayfun. The Aqua is fiddly, the dual coil setup really doesn't improve the vape that much, and the juice control is pretty much useless. That being said, it's still a decent RTA, and looks sweet when combined with the Origin.

I agree, no KF killer at all. As Simian mentioned juice control isn't necessary at all. And for me the adjustable air seems strange. It's either wide open or tight. The air holes r beneath the sleeve which has an oring. That oring leaves a gap which only when closing the sleeve a lot tightens up the draw. It is a good atty and looks great on the Origin. I was hoping it could substitute for my KF and for me it just didn't do it.

Ken


Sent from my iPhone using Tapatalk

 

[pastubbs]

The only thing I seen that beats out the KayFun is the SQaupe its a better build plus you can remove the build without draining the tank. But then there its main drawback at least for me and that is its wider at 23mm [I don't have many 23mm mods] and its tall very tall. oh here a pic for comparison almost forgot this is a picture thread. Note how large it is compared to the KayFun to the left and thats a KayFun in its standard height. umm I thinks its about time for a collection photo maybe this weekend I'll have to pull most of my stuff out the vape chest.

 

[floridaBMW]

Yea that thing is huge.

Ken


Sent from my iPhone using Tapatalk

 

[BIG CL0UDS]

Hana Modz V3 DNA30

 

[Mark Howard]

Completely agree with you on the benefits of the SQuape pastubbs. Are u sure it's 23mm? Bc on my Provari with ring it lines up flush for me and that's 22mm.

-Origen Aqua Hybrid Clone (Tobeco)
-Provari Mini w/ a Kayfun Lite+ Nano
-Magneto w/ Trident
-Lunar Mod w/ Origen Dripper
-Provari Mini w/ SQuape
-El Kapitan w/ Tatroe SS Protank

 

[grayscale]

You might want to remeasure your Provari It's actually considered a 23mm mod as it is about 22.5-22.6mm.

Completely agree with you on the benefits of the SQuape pastubbs. Are u sure it's 23mm? Bc on my Provari with ring it lines up flush for me and that's 22mm.

-Origen Aqua Hybrid Clone (Tobeco)
-Provari Mini w/ a Kayfun Lite+ Nano
-Magneto w/ Trident
-Lunar Mod w/ Origen Dripper
-Provari Mini w/ SQuape
-El Kapitan w/ Tatroe SS Protank

 

[Mark Howard]

You might want to remeasure your Provari It's actually considered a 23mm mod as it is about 22.5-22.6mm.

I've never measured it, just always hear about 22mm atty's fitting perfect. So the number you mentioned explains it to me why the SQuape fits so nice with a ring as do my 22mm's. I vaguely remember that about the SQuape now from the reading I did back before I got it. Thanks for that.

 

[ions]

Chimbus on the Poldiac clone

 

[binaladout]

I will post mine soon when it finally gets here

 

[chadsmo]

 

[Peppie]

haven't been here in a minute! happy new year ECF.

copper stingray #13 checking in.

I have been looking for a new mod. Thanks! Where did you get it?