- Status
I stack two 3.7v 18350s and run 3 ohm DC carts. This setup has given me the vape I need to not crave cigarettes, but I burn through liquid. I keep decreasing my nicotine content, as I realize how much liquid/nicotine I take in. I have tried a single 3.7v 18650 with a 1.5 ohm cart, but was left wanting. My goal is to get back to the single battery at some point. I may also try a higher resistance cart with the 2 battery setup. Suggestions?
^hybrid mode with the rethreader, I ordered an extra brass pin and dremeled it down a bit, then cut an air channel into it, also I bored out the holes in my collector tank for a more adjustable draw
Its just my beat around, out of the house setup, for taking places i dont want to take something really nice. Im liking it alot now but I hated the GG when i first got it, had to bend it to my will, first thing i did was modded switch with a crescent shaped contact for the round axis and I use magnets instead of a spring in it, this is what I use instead of a spring on the axis and it gives some adjustability as well
Last edited:
Is your axis post solid? Seems to be. But am unsure if you use a interior spring fuse.
Great set up Kibro. Tell gf I dig the hello kitty food and water dish. Your killing me
Great set up Kibro. Tell gf I dig the hello kitty food and water dish. Your killing me
Is your axis post solid? Seems to be. But am unsure if you use a interior spring fuse.
Great set up Kibro. Tell gf I dig the hello kitty food and water dish. Your killing me
lmao. bro thats not a hello kitty, just a regular kitty dish,
Thats the brass pin you got me in there right now, its awesome bc now i can use it in hybrid mode with the collector tank, I took a few mils off of it and re-cut the air channel back in so that I could use it with just the rethreader in 18350 mode and I also opened up the holes a bit on the CT. the axis post i have is the normal one where the spring would normally go into it, i flattened out a M5 naval brass screw and put it in there, then you just adjust by threading it up or down to battery height for a solid connection, you can also use it to change the button position or line it up with the wick if your using something like a genny on there with the tele tube. The GG/ithaka is the perfect out of the house setup for me... i drag it around with me everywhere.
Last edited:
It's not a feather touch trigger but I can use my pinky. I like those better since the weight won't press it down when placed on a table.
This is what I'd recommend to anyone who wants their first mech mod setup and the Private V2 for a feather touch bottom trigger.
vapemail! UD agt titanium/pyrex tank rebuildable atomizer with double coupons from 101vape.com - $25!!!!!!!!!!!!!!!!!!!!!!!!
you may be asking... where's the wick into the tank??
well... i dont like Stainless stell wicks.. i just dont.
i like cotton wicks but i couldnt get a cotton wick to work and it was such a pain anyway.. though i will be watching some videos and holding out hope..
so, i tried something and it works great! this may be silly, but i love it. i built a wick in the style of a dripping atomizer, and removed one of the screw holes on the deck, which left me with two holes going to the tank (other hole was the wick hole. its covered up by the wick in the photo)
when i need to get more juice to the wick, i tip horizantally and suck for a second or two, and the juice just glugs on to the deck and into the wick. Its working beautifully and its a LOT less hassle than anything else i've tried with this thing.
so, odd as it may be, I'm left with a sort of hybrid "wickless" tank.
what do you think?
A lot of cheap dates becomes an expensive marriage
Lol. I've been looking for a drip tip like that on the e-pipe. Where can I order one?
A lot of cheap dates becomes an expensive marriage
Lol. I've been looking for a drip tip like that on the e-pipe. Where can I order one?
Congrats on the switch. You should not come to this thread lest you get mod envy and become a "collector".
My setup today.
Mod envy in full effect! That G-Hit is way better than the original eGo battery I had, I can only IMAGINE how well these mods vape. My next purchase will definitely be VW. You guys rock. My wallet hates you.
Last edited:
Poldiac w/ Nimbus, Brass Chi w/ Nimbus and brass 22mm stealth cap, Kalafan Nemesis w/ Nimbus and polished 22mm stealth cap.
So i finally got my new board in the mail! ProVape is .....ing awesome! When you order parts they ship really fast! i got the board in the mail and in less than an hour my provari v2.5 is already vaping rain clouds!!! i disassembled to replace a plastic window that broke when i dropped it. having dropped it, warranties are null and void which is why i decided to repair myself... it started off as a simple replace the window and screws... then it became "oh while i got the board out..." so i hit the tube with the polish treatment... half way through i decided it would look bad ... with a blue LED instead of the OEM red one.. so i ordered the blue LED board and did all the work... here are the fruits of my labor... forgive the poor quality photos, my phone battery is dying and wouldnt let me use the flash... i also couldnt beat the dying battery to take a photo of the blue LED in action but itll be up tomorrow
- Status
Similar threads
