- Status
I have posted before my collections a few months back and here is an updated
Have a drill bit break on the cap all the way to the right? LOL. Really good looking lineup!
This is what I'm taking to work today with some Dekang Dr. Pepper with menthol and Mt Baker Vapor Cinnamon Red Hot added.
K101 with Kanger Protank 2 and smok Magneto with Kanger Protank 1
Can someone tell me the difference between a K100 and a K101? I have a K100 from fasttech and when I check the vendors, this is a K101 [in the picture] but it is engraved as a K100 :/
K101 with Kanger Protank 2 and smok Magneto with Kanger Protank 1
Can someone tell me the difference between a K100 and a K101? I have a K100 from fasttech and when I check the vendors, this is a K101 [in the picture] but it is engraved as a K100 :/
FINALLY! After a week of attempting to get an rba working I have a feeding, not leaking, 1.5 ohm, great tasting SS wick with a 32 gauge kanthal coil. I was hoping for 1.3 ohms, but this is working great on my mechanical mod, which is the smoktech magneto.
FINALLY! After a week of attempting to get an RBA working I have a feeding, not leaking, 1.5 ohm, great tasting SS wick with a 32 gauge kanthal coil. I was hoping for 1.3 ohms, but this is working great on my mechanical mod, which is the smoktech magneto.
Have you tried threading silica through there? After hours of fiddling with stainless mesh I tried with silica and I couldn't be happier! On the rsst that is
I tried doubling up 2 mm ecowool, but I would just taste wool, so I don't think it was wicking properly. Maybe I used to much?
One strand should suffice. I can't imagine how you'd get a double strand through the wick hole 0_0
Sent from an itty bitty keyboard
Well now that this thing is in there and working, I'm not taking it out until it's so gunked up it's unusable. When it's time to rebuild I will try a single strand and see if it wicks properly, and does not leak.
I used a very long piece of ekowool doubled up (3mm) pulled it through with a hook like 10 inches, wrapped my coil, pulled it back to where it needs to be, then trimmed the wick and screwed on the plastic tank piece. Screwed yhe coil into the posts and voila!
Heres how it looks
That one meters at 1.6 ohms
Heres how it looks
That one meters at 1.6 ohms
Last edited:
Wow, what a lot of very nice equipment. My needs are few (reliable nicotine delivery). I was reamed at a local kiosk on the ego-C starter kit. What I rally needed was the hands free e-roll and between to two sets I am never left wanting. I had read of those whom had broken their ego-Cs' from carrying them in their pockets. I made the 304 Stainless holster at work to a avoid that problem.
I originally started off my e-smoking with one of the cheapo kits from 7 Eleven a couple years ago... It sorta helped me cut down but wasn't nearly satisfying enough so I was using both real cigarettes and the ecig and that didn't last long... last year around this time I discovered the Blu product and I managed to MOSTLY quit smoking with that... but that stopped doing the trick after about 6-8 months... Well, now I reallllllllllllllly need to quit smoking real cigs because I'm going to be moving to Hawaii within the next year and smokes cost $10-$15 a pack... YIKES! Anywaysssssss... I found a personal vaporizer store here in Denver, CO and I had the most amazing experience with them... They walked me through everything from choosing my first real vaporizer, taught me how to maintain it, let me sample flavors and gave me advice on mixing flavors.... It was AWESOME! Best customer service ever.... If anyone lives in the Denver Metro area I totally recommend VaporLeaf. I haven't had a real cigarette in over 48 hours. I'm loving this as both a new habit, and a hobby... So, this is my first setup, no mods or anything done yet... just the neon green KengerTech EVOD BCC.... So far. I'm sure I'll be getting more soon.
I was thinking of buying the protank II and trying it out with either my evod battery.... or buying a twist as my second (ever) setup
Kanger Pro 2 is probably one of the best off the shelf coils I have tried. I love them. I did rebuild one of the coils for 1.3 ohms so I can use it on a standard ego c and get a strong hit, and it works awesome.
- Status
Similar threads
