Pictures of your setup

[jimkipila]

I just got my 18650 Caravela clone made by EHPRO(i really like it by the way!!). I have the IGO-L (@ 1.0 ohms with cotton ball wick) on it and on the right is my Elego vv v3 with Protank 2 (cotton / silica hybrid wick with removed rubber cap @ 1.4ohms)

i think evegeny has merit to the statement...

If people come on to this thread to look at a potential purchase, at least they know what they are looking at.
I have a REAL Omega dripper, i've held the clone in my hand. while they look similar, the finish and airhole size is different. With a small air-hole tweak they WILL vape the same.
That would be enough to make a user chose between one or the other.

If there is a Caravela clone posted up, and it looks as good, then a user may opt for the clone and be completely happy.



BACK ON TOPIC!

Original owner of Caravela #325

Currently up for auction

 

[Mark Howard]

Today's work setups...

El Kapitan/Origen, provari mini/kfl+, Lunar/Trident.


Sent from my iPhone using Tapatalk

 

[Ulmer]

Where'd you get that hybrid connector for the Paps?

Nowo

 

[retired1]

This thread is for posting pics of your setup, not to debate the merits of clones vs the real thing.

 

[bertfelin]

My sexy 2nd wife

 

[Paksoy]

I hate my work phone ... the built in camera produces horrible pictures. LOL!

"Authentic" ProVari Mini with "Authentic" Serenity Sleeve and "Authentic" Kanger Protank II using "Authentic" AW IMR 18350 Battery - (Fake Chopper).

 

[boborone]

i dont want to start a discussion- I PERSONALLY would just like to see the mods named correctly-
like HCigar Kyafun Lite, or FT Nemesis..
or Just GG, etc.......it doesn't take much and really lets everyone know what gear they are looking at
thx...im done...
Full Brass Chi You/Flat Cap/Engraved Tube + Trident V2 + 2Puff Granada DT + 0.27ohm dual coil 0.9ribbon 3 wrap madness

i think evegeny has merit to the statement...

If people come on to this thread to look at a potential purchase, at least they know what they are looking at.
I have a REAL Omega dripper, i've held the clone in my hand. while they look similar, the finish and airhole size is different. With a small air-hole tweak they WILL vape the same.
That would be enough to make a user chose between one or the other.

If there is a Caravela clone posted up, and it looks as good, then a user may opt for the clone and be completely happy.


BACK ON TOPIC!

Original owner of Caravela #325

Currently up for auction

Not sure why my post was deleted. But thanks. That makes sense. I agree that people should name what gear is in the pic.

Sent from my Nexus 5 using Tapatalk

 

[Ed_C]

Looks like the hog is not a 1:1 clone.

I hate my work phone ... the built in camera produces horrible pictures. LOL!

"Authentic" ProVari Mini with "Authentic" Serenity Sleeve and "Authentic" Kanger Protank II using "Authentic" AW IMR 18350 Battery - (Fake Chopper).



View attachment 292933

View attachment 292939

 

[Paksoy]

Looks like the hog is not a 1:1 clone.

I was gonna try to pass it off as the real deal ... but folks with a real keen eye would have uncovered my deception.

 

[ainews]

my first unit I got from hangsen
a echo-v

 

[BuzzKilla]

I was gonna try to pass it off as the real deal ... but folks with a real keen eye would have uncovered my deception.

just take a picture of it on the driveway, with you standing really far in the background till it looks scale... problem solved!

 

[Paksoy]

View attachment 292957
my first unit I got from hangsen
a echo-v

These eGo style units will never die out ... they're just so classy and practical for almost any occasion. Excellent pick to start you off on your vaping journey.

 

[Paksoy]

just take a picture of it on the driveway, with you standing really far in the background till it looks scale... problem solved!

Buzz, with the weather and chaos we've been having lately (ice storm, power outages, snow storm, -30 degree temperature) ... I'd be hard pressed to stand in my driveway for any amount of time. LOL!

 

[retired1]

Keep it on topic folks.

 

[pastubbs]

I think we all have forgotten the purpose of this tread which is posting pictures and a "new to vaping" tread. But I however somewhat agree we should probably put some names to all these mods genuine or clone. Not for the sake of having a clone war but to give new vapors an idea of whats out there and some insight on the differences between them. Now back to the topic here's some of my favorite gear throw in some prices for new vapors to get an idea of what they can get for the money they have to spend
from left to right :
1] Nemesis clone [$30] with Trident v2 at .2ohms[$100]
2] Vapor Shark DNA[$175] with SQuape clone at 1.5ohms[$35] leftout the KayFun in favor of the SQuape its just so much much better to build on
3] Cool Fire 2[$50 brand new from a vape meet] looks bad ... and fits my hand like a glove
4] itaste vv[$25] with mini T3s with rebuild head at 1.2ohms[$5] My most used device at the moment does a lot for the price and its size
5] Brass Nemesis[$190] with a kick at about 12.5 watts[$45] and Trident v1 at 1ohm[$80] I have a trident v1 clone as well and for the $10-20 they go for its a great first RDA
6] mini EGO 350mah batteries[$5 each] Great for out and about with the mini T3s

 

[Ahoy]

Nemesis clone, aspire bdcc, 18650 30 amp, 18350, 2 needle bottles, ohm meter some kanthal 28 gauge some silica all from my local b&m...I gotta stop spending money lolololol oh yeah and an igo w


Sent from my iPhone using Tapatalk

 

[floridaBMW]

Love my Chi. I do agree with some folks in clarifying wether clone or not. We all have the right to spend our money how we choose. I understand the clone, I'm not a fan of the maker branding them the same.

Ken

Sent from my iPhone using Tapatalk

 

[Dave7x]

Is it the tobeo squape clone or what manufacturer or where did you get it? I have a real kayfun lite plus and a clone and love them both. I've been wanting a squape or aqua clone or both but have heard mixed stuff about both depending on clone manufacturer. I've been vaping for 2 years but new to the site so I hope I'm not out of line for asking here.

 

[DelboyinDorset]

All change since the new baby arrived... hehe can you guess which one is wearing my awesome award right now...?

Hammer clone after cleaning and buff

Hammer all assembled after cleaning, also the copper shield and drip tipped RG500 to the left that came this week

Top to bottom:
Vivi on K100+ (WizMix Grape Escape 24mg)
RG500 on M16 clone alloy headed rubbisho threadness (WizMix Cherry Bomb 24mg)
Ego-W on T5 Lavatube (Mandarin 36mg)
RG500 on KSD Kmax (Dekang Red Cola)

Hammer again with my awesome Steam Turbine clone running MistEliquids superpowerful 36mg spearmint with extra spearmint shots

A quick FYI this is the $20 Hammer clone from FT not the more expensive one, it turned up in a plastic bag, covered in a kind of grease, I got the steam cleaner all fired up and got the grease off using that and some brake and carb cleaner which got the whitey stuff off the engraving, did a load and drop check, not even a volt lost, works extremely well with the turbine, this baby sits in your hand just right, easy to park on the desk, quick microcloth wipe to buff it up and I think it was worth it, best of my mech mods tbh. Only niggle really is the lock ring is hard to thumb operate and the throw switch is like the M16's and will undo after a while.

Oh and as I was called out on my three wheeled van with a lovely pic of my custom Vespa MK1 T5, me van is in the background...

 

[Dave7x]

My 4 favorite mods from left to right. Just gg with kl+ wich I posted earlier, then my ss chi you clone heat treated with aga td, ea clone heat treated with kayfun lite clone, then my reo grand. Don't know why the pics keep coming out sideways.