Pipe Talk - all makes, models, and designs

[Bigfoot1974]

I need Help!! I had thought this morning that I could put my can in my EPM 2.5 and be able to vary the wattage. I put it on and put on my AC9 and nothing happened. I thought that it might be the threads weren't making good connection but after taking it off and putting the AC9 back on the pipe is not working right now. What happens is a short burst of power but nothing else. I even put a 510 atty on and the same thing. I'm kinda freakin out right now. Did I somehow short out the board at the bottom? Anybody ever have this happen? Thanks

 

[Absintheur]

The fuse in the EPM should reset after being powered down and let sit for a bit but there is a chance you over powered it too far. Take the battery out and let sit for a few minutes and try it again. If it is still cutting out it will have to go back for repairs.

 

[Bigfoot1974]

I was afraid you would say something like that. It's still not doing anything different. This really blows!

 

[Absintheur]

Shoot Matt an e-mail and ask him...he may have an idea...there may be a five tap code or something to re-set the fuse.

Well I watched the video in the EPM FAQ...you are hosed....sorry. Send it in and pay the 25 bucks.

 

[Bigfoot1974]

Shoot Matt an e-mail and ask him...he may have an idea...there may be a five tap code or something to re-set the fuse.

Well I watched the video in the EPM FAQ...you are hosed....sorry. Send it in and pay the 25 bucks.

Called and yeah I'm hosed. Already sent it back. I feel naked without my pipe. Got one on order and one being fixed. AAAAARRRRGGGGGG. Back to the Provari but still have my churchwarden on it because I like the airflow better. Looks pretty wild.

 

[Absintheur]

I like the flat tip better...I use one of the shorty stems on my Bombshell...

 

[Bigfoot1974]

That looks cool but my problem is the only churchwarden I have is 8" long.

 

[Absintheur]

for those handy with their hands I was on ebay and did a search for churchwarden. You can but pipes with 8-10 inch CW stems for as low as 15 bucks. Do some work on the tenon and you could have a bargain price CW for your e-pipe. Same logic applies to many nice stems on cheap wood pipes.

 

[Absintheur]

Yes...I like stems...

 

[Big Juicy]

"This week, on 'My Strange Addiction'..."

 

[matt13104]

Has anyone tried putting a kick in their Diablo e-Pipe yet? It is not a regulated device, so I thought this would be a good idea. However, OKC Vapes says it will not work because The kick wouldn't be grounded. Does this make any sense? Why can I stick it in a mechanical tube mod but not this mechanical mod?

 

[Bigfoot1974]

Yes...I like stems...

I am soooooooo jelous!! BTW I bought a cool pipe off ebay today and plan to convert it. Thanks for the idea!

 

[Absintheur]

Has anyone tried putting a kick in their Diablo e-Pipe yet? It is not a regulated device, so I thought this would be a good idea. However, OKC Vapes says it will not work because The kick wouldn't be grounded. Does this make any sense? Why can I stick it in a mechanical tube mod but not this mechanical mod?

In a metal tube mod the wall of the tool provides the ground for the Kick, the inner wall of the Diablo is non conductive. The metal spring on the Kick has to be touching the mods negative ground.

 

[dupaloop3611]

I must have that smoktech epipe

 

[shoogdadi]

I've been in that position before, stepping down to the Provari is getting harder and harder.

 

[PumaDedek]

I was delivered defective electronics, therefore, is not yet done.

 

[Absintheur]

PumaDedek...where do you get you electronic packs from?

 

[PumaDedek]

It's electronics pipe 18350 battery case for E-pipe (F)-107
purchased as a part of, in our e-schopu

PumaDedek...where do you get you electronic packs from?

 

[Absintheur]

New E-Pipe Mod on the way...be my first pipe using a battery larger than an 18350...

 

[Bigfoot1974]

It's crazy how fast the new pipes sell on the EPM site. I check it daily and still missed out on some cool pipes. Really nice pipe Absintheur!!