Your coil looks really close to the edge and may be making contact with the cap or the screw head is making contact with the top of the cap . If you dont have a small drill bit you can drill the hole out with I can do it for you
- Status
thanks for the reply Robert. is it possible to just swap out my RM2 with one already drilled out and with the holes lined up straighter? I still have to send back the Grand tomorrow anyways so I can easily just put the RM2 in there with it. one of the things that drew me to the reos / rm2's is everyone talks about how easy they are to use. I'd really rather not have to mod any of this stuff if it's not a problem.
oh, also Robert, how can I get ahold of some new springs? I'm kinda dead in the water without the springs. I was going to order a few this morning but it said it was out of stock. am I SOL for now? 
Your caps causing a short somewhere. At this point I'd try doing another coil focusing on keeping the wire from making any possible contact or even getting close to the cap. The new RM2's are coming drilled now. It's gotta be a short, just not sure based on the pics where. Either way keep all wire away from cap.
If I had a spate spring, I'd gladly send it to you.
Bummer that you've got this amazing hardware but aren't able to use it.
Once everything is sorted, your patience will be rewarded.
Bummer that you've got this amazing hardware but aren't able to use it.
Once everything is sorted, your patience will be rewarded.
much appreciated!!
I really hope I can get things sorted. just got a teaser of what this thing can do test firing. I've read it over and over but was still surprised as hell how small all this hardware is in real life!! I guess watching so many YT videos with super closeups makes your brain think these things are larger than they are, but when I saw how tight the space is I tried really hard to keep the coil tidy. just waiting for Robert now. 
Send the mod and the atomizer back I will get them both fixed and shipped back to you asap . I no its been a rough start but it will be worth it once we get you sorted .oh, also Robert, how can I get ahold of some new springs? I'm kinda dead in the water without the springs. I was going to order a few this morning but it said it was out of stock. am I SOL for now?
Please put
a note with your email address and a brief description of the problem .Also
empty any e juice in the mod and remove the bottle .It helps to put a tissue
or napkin around the tube .
Reos Mods LLC
120 Ida Jim Rd
Alfred Me 04002
thanks a lot Robert!! I sent you an email this morning and didn't see this until now. I sent the original Grand with the crooked threads and the atty to you already, it's already left.
I didn't think that there was anything wrong with the new Grand so I didn't send it. if you think there may be something wrong with it, I'll have to mail that separately tomorrow, please let me know. if I could just get a couple of extra springs for it, I really suspect the problem was more with the RM2 because the Grand test fired great with the RM2's cap off but you know better than I do!! I'll follow-up with another email with you when I get home from work since I didn't get a chance to put a note with all the information you requested with the box. thanks again Robert!!
Just time now, hang in there. Horrible to have to wait for that great vape. Keep us in the loop.
I sent my latest RM2 back to have it drilled. I could just change the way i make my coils - but i have -err- about 14 RM2s and so i didn't want to.
I posted/mailed it to Rob on the 19th and enclosed return postage because i am polite! I got it back today (25th), and he'd returned the stamps i sent too. None of which would be exceptional until you realise i am in Texas and he is in Maine.
The point of all this is a big thanks to Rob and to inform everyone that his dedication to making his customers happy is exemplary. Too bad for me he never took up dentistry or car mechanic classes.
T
I posted/mailed it to Rob on the 19th and enclosed return postage because i am polite! I got it back today (25th), and he'd returned the stamps i sent too. None of which would be exceptional until you realise i am in Texas and he is in Maine.
The point of all this is a big thanks to Rob and to inform everyone that his dedication to making his customers happy is exemplary. Too bad for me he never took up dentistry or car mechanic classes.
T
I sent my latest RM2 back to have it drilled. I could just change the way i make my coils - but i have -err- about 14 RM2s and so i didn't want to.
I posted/mailed it to Rob on the 19th and enclosed return postage because i am polite! I got it back today (25th), and he'd returned the stamps i sent too. None of which would be exceptional until you realise i am in Texas and he is in Maine.
The point of all this is a big thanks to Rob and to inform everyone that his dedication to making his customers happy is exemplary. Too bad for me he never took up dentistry or car mechanic classes.
T
Mr. T- i suspect you already either regret saying that, or regret not including an "also" somewhere in there
Last edited:
well hot damn!! after a rocky start, I got my replacement spring from Robert, thanks Robert!! also sent me a new button just in case I need it, and I just ended up ordering a new RM2 just to hurry things along while I wait for the original RM2 to get drilled out. got all the new gear in, put in the spring, wrapped up another 1.0 oHm coil and this time heaven!! fantastic vape with the Grand and the RM2!! I still have to get used to the new form factor as I've been using tube mods until now. and not really sure how often to squonk or whatever you call it. I think I may be overdoing it right now cuz I'm paranoid of burning up the cotton wick I have in there but so far, I'm loving this setup!!
Robert, please send me an email when my original RM2 is finished and on it's way back to me. I really appreciate all of your help as well as all the friendly folks on this forum!!
also sent me a new button just in case I need it, and I just ended up ordering a new RM2 just to hurry things along while I wait for the original RM2 to get drilled out. got all the new gear in, put in the spring, wrapped up another 1.0 oHm coil and this time heaven!! fantastic vape with the Grand and the RM2!! I still have to get used to the new form factor as I've been using tube mods until now. and not really sure how often to squonk or whatever you call it. I think I may be overdoing it right now cuz I'm paranoid of burning up the cotton wick I have in there but so far, I'm loving this setup!!Robert, please send me an email when my original RM2 is finished and on it's way back to me. I really appreciate all of your help as well as all the friendly folks on this forum!!
Thanks for the feedback Bert. Glad you love the vape. Enjoy. Fortunately the rm2 is almost impossible to flood and at most you'll get some juice around the airhole if you really go wild, but you will quickly get into your own individual rhythm.
- Status
Similar threads
- Locked
