Please help me with my ecig build

Status
Not open for further replies.

bigchaza

Full Member
Apr 9, 2014
10
0
Australia
Please help with my ecig build I've done to much reading and my head is spinning, I just need to know what other parts I need to complete this build.

ok so here is what I've selected thus far
Provari v 2.5 With the extension and bigger battery.

Innovape-Patriot-24K-Gold-Full-Unit
for the atomiser.

The tip is a Innovape-Silencer-Exhaust-Pyrex-Drip-Tip

I wasn't sure if the atomiser was an eliquid tank and atomiser combo, if it isn't any suggestions on a high capacity tank and do I need any adapters or have I forgotten something.

Sorry bet to sound so naive but this is my first attempt and I've never seen any vaporisers apart from my halo triton's and I'm keen to move up to a more tailored solution
 

bigchaza

Full Member
Apr 9, 2014
10
0
Australia
First of all thanks in advance.
ok so the provari battery it pretty straight forward ill just get it with the big battery and the extension.
ProVariPolishedSS-2T.jpg

Then the atomizer which confuses me is it just an atomzer or is it a tank too.
It can be found on "vapor labs online" and is called the Innovape Patriot 24K Gold Full Unit
imgres.jpg

the the drip tip also innovape so i cant see any trouble with it attaching to the patriot atomizer
url.jpg

So 2 questions are do I need a tank and if so could you please recommend one that is of a large capacity and stainless, gold or see through, and secondly do I need an adapter from the provari to the patriot atomizer. Also if you think Ive totally missed the point and its a bad build please feel free to recommend other bits.
 
Last edited:

Laggy

Full Member
Verified Member
Apr 12, 2014
24
17
Slidell, LA, USA
That Patriot Atomizer is (I believe) an RDA, which is a drip type atomizer. It only holds a few drops of fluid, and you just keep refilling it. (Depending on your build, if you go crazy it can last as little as 2-3 hits before you have to refill). There is no "tank" that feeds the wick.

Do you NEED a tank? No, a lot of people enjoy vaping on just the RDAs. They aren't so good for carrying around with you to work etc, though, because you have to refill them so often.

If you want one with a tank, something like a Kayfun (clone or original or russian 91, depending on what you want to spend) or an Aqua are probably the way to go. I haven't tried any of the genesis type attys, but just from watching videos and doing some research, they seem to be a bit harder to build than the kayfun-esque attys for no real benefit that I can see.
 

edyle

ECF Guru
ECF Veteran
Verified Member
Oct 23, 2013
14,199
7,195
Port-of-Spain, Trinidad & Tobago
Please help with my ecig build I've done to much reading and my head is spinning, I just need to know what other parts I need to complete this build.

ok so here is what I've selected thus far
Provari v 2.5 With the extension and bigger battery.

Innovape-Patriot-24K-Gold-Full-Unit
for the atomiser.

The tip is a Innovape-Silencer-Exhaust-Pyrex-Drip-Tip

I wasn't sure if the atomiser was an eliquid tank and atomiser combo, if it isn't any suggestions on a high capacity tank and do I need any adapters or have I forgotten something.

Sorry bet to sound so naive but this is my first attempt and I've never seen any vaporisers apart from my halo triton's and I'm keen to move up to a more tailored solution

The patriot is an RDA; a dripper;
since you are in australia, check out fasttech
7512 Electronic Cigarettes at FastTech - Worldwide Free Shipping

a good startup setup is the mvp kit.

1390901-31.jpg

$45.16 Authentic Innokin iTaste MVP Variable Voltage APV Starter Kit - black / 2.7
 

bigchaza

Full Member
Apr 9, 2014
10
0
Australia
Ok I get it know I'll buy some tanks to go on the end of the provari
and the atomiser for my favourite at home vapes total win win situation
Been reading whilst this is going on and I get it a lot more thanks to the
Very helpful input here. Unfortunately I don't find the square ecig's as portable or aesthetically pleasing
But thanks for the input on that one Edyle.
 

CreepyLady

Ultra Member
ECF Veteran
Verified Member
Aug 22, 2013
2,961
3,555
Salem, MA, USA
Ok I get it know I'll buy some tanks to go on the end of the provari
and the atomiser for my favourite at home vapes total win win situation

Been reading whilst this is going on and I get it a lot more thanks to the
Very helpful input here. Unfortunately I don't find the square ecig's as portable or aesthetically pleasing
But thanks for the input on that one Edyle.

^ The bold type is exactly correct :)

Check out cartotanks (like IBTanked), or for standard clearos I hear good things about the nautilus and aero tank.

Happy vaping! And money wise - if you can afford to start provari for your first VV device - do it. It will save you money in the long run :)
 

superstardj

Senior Member
ECF Veteran
Verified Member
May 21, 2012
156
37
Maggie Valley, NC
The aerotank in my opinion is very middle of the road at best, the nautilus is a very good tank system and will give you better flavor and more vapor. Since your just starting out you may or may not want to dive into dripping and or rebuilding but dripping gives incredible hit, warmth and flavor but is way more work.


Sent from my iPhone using Tapatalk
 

kinggirl

Ultra Member
ECF Veteran
Verified Member
Aug 14, 2013
1,145
2,944
Dallas
^ The bold type is exactly correct :)

Check out cartotanks (like IBTanked), or for standard clearos I hear good things about the nautilus and aero tank.

Happy vaping! And money wise - if you can afford to start provari for your first VV device - do it. It will save you money in the long run :)

EXACTLY what they said. I bought a vamo, then a mvp 2, an itaste, then another vamo. Then I bought a provari and I don't use anything else but sometimes the mvp.
 
Status
Not open for further replies.

Users who are viewing this thread