Please help?

[ncolwell]

I bought an MVP 2 which came with an iClear 30. A few days ago, I ordered a few replacement coils that were 1.5 ohms. Then I realized the one I have now is 2.1. Is it ok to use these new coils, or should I return them for the 2.1? I don't want to ruin anything, so I thought I'd ask the experts.

Sent from my SCH-I535 using Tapatalk

 

[klynnn]

They should work fine depending on your voltage. May be a little warmer.

 

[distortoblotto]

The 1.5's will be just fine.

My preference when using Clearo's and Carto's. Keep in mind that they heat faster and can burn if you crank up the voltage too high. Start them of @ 3.6-3.7 volts and bump up (if you prefer) from there. If you start to get a burnt taste, bump the voltage back.

You are good to go!......

 

[pamdis]

It will work just fine. You may need to lower the voltage on the MVP, that's all.

 

[ncolwell]

Good to know. That won't be an issue since I use pretty low volts and watts anyway. Ever since I've learned how to clean the coils and dry burn them every time I do it it feels like a brand new coil. I had a guy at the local B&M tell me I was going to ruin my coil by doing that instead of replacing them. I think he was just trying to sell me something different, but I got the coils because I do know they won't last forever.

Sent from my SCH-I535 using Tapatalk

 

[Myrany]

Good to know. That won't be an issue since I use pretty low volts and watts anyway. Ever since I've learned how to clean the coils and dry burn them every time I do it it feels like a brand new coil. I had a guy at the local B&M tell me I was going to ruin my coil by doing that instead of replacing them. I think he was just trying to sell me something different, but I got the coils because I do know they won't last forever.

Sent from my SCH-I535 using Tapatalk

I kept the original 2 coils that came with my protank going for over 6 months with careful dryburning and cleaning. Then I learned to rebuild them so in a way after more than a year they are still going

You do have to be careful or you will melt the grommet. so do it in small bursts and let it cool between.

 

[GeorgeWachsmuth]

Yeah...you may even find you like them a little better.

 

[Lurch]

I clean my coils, too. I usually will clean them a few times before replacing them (I build my own, which is extremely easy). I do generally replace the wicks with cotton when I dry burn them...

 

[Iffy]

Just set your MVP to a wattage level that you enjoy. Set and forget; regardless of da ohms. I prefer 8.5 watts. YWMV...

 

[Rat2chat2]

I agree with the above post by Iffy but since you've already gotten answers, I just wanted to

you to ecf. Lots of wonderful people here. Glad you are here too. Happy vaping to ya.

 

[zoiDman]

I bought an MVP 2 which came with an iClear 30. A few days ago, I ordered a few replacement coils that were 1.5 ohms. Then I realized the one I have now is 2.1. Is it ok to use these new coils, or should I return them for the 2.1? I don't want to ruin anything, so I thought I'd ask the experts.

Sent from my SCH-I535 using Tapatalk

This is the Cool Thing about a Variable Voltage or a Variable Wattage Device. You can just Adjust the Volts or the Watts Up or Down to find what works Best for just for either the 1.5ohm or the 2.1ohm Clearo.

Just start at a Low Setting and keep bumping it up after taking a Hit or Two. You'll know when to Stop.