Praise for the DID

[donnah]

vaping it right now It looks great on my Roller, but it is a bit top heavy in 18350 mode. I hope the short DID will fit the bill for a more compact out and about setup on the Roller with 18350's.

that's right.. you got a roller.. does the roller have an adjustable center pin that lets you orient the air hole? I opted for the EA but might would have got a roller if I could have.

 

[donnah]

Thrasher" data-source="post: 9108254" class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch">

all im going to add is about the cobra, if you never used one the cap is like no other oring cap, sometimes it takes serious force to get it off. that rubber on titanium grabs tight most of the time and never moves or comes off in my pocket, and i take my cobra everywhere.

god forbid they actually get dry in there lol

but i think down the road im getting another MMV gemini.

you know I've wanted a cobra for quite awhile now.. was waiting on Phiniac to get them back in stock so I could get the sandblasted tank with it.. but I've over spent this weekend and my getting a cobra will have to be down the road also...far down the road lol
what was you talking about above when you said something about something bulging and getting a tapered something?

 

[Buzzsaw46]

I might have gone Gemini if they had a satin in stock today, but I do like a tank that I can see my juice level.

My AC9 top is also much more secure than my ZAP, I think the taller deck makes it not as likely to pop off from side force.

 

[Buzzsaw46]

that's right.. you got a roller.. does the roller have an adjustable center pin that lets you orient the air hole? I opted for the EA but might would have got a roller if I could have.

Yes it does have an adjustable center contact. It's a nice little mod, glad I bought it!

 

[donnah]

Yes it does have an adjustable center contact. It's a nice little mod, glad I bought it!

I wish you had told me it was crap and not to even think about getting one

 

[Thrasher]

"all the women ask me bout my bulges"



lol the ibtanked tubes - they are fatter then the plastic tank on the did and add a slight bulge to the body, they offer a tapered edge option when ordering and it helps the tank look more inline (as in the edges dont overhang the top).

and after busting two of them im never buying a custom tank for anything ever again lol

 

[Rule62]

I've been wanting either a Roller or a Poldiac. I can't seem to catch either in stock.
Anyway, I think you'll like the Short DID. On a Roller, in 18350 mode, it will be a nice pocket friendly set up.

 

[donnah]

You guys convinced me, I just ordered a Cos Flaw satin D20 with a short converter. Cobra will probably be next.

I just realized that once again (as with the ac9) we've both ordered the same thing at the same time! I wonder if I'll get mine before you get yours again lol

 

[Buzzsaw46]

I just realized that once again (as with the ac9) we've both ordered the same thing at the same time! I wonder if I'll get mine before you get yours again lol

It would be just my luck.

 

[Buzzsaw46]

Looks like mine will be here today. UPS stalking mode engaged.

 

[DSmooch]

hey steve... I'm impressed with your purchase list this month! wow!
Pete said earlier that the DID is the most underrated atty... definitely underrated. But I think the temon has to be the most underated of all.
I got one on the way Luckily, I grabbed a BTO battery holder brass/ss config a while ago (for a "carvelish" look).
They don't seem to have that option anymore. Anyways, the D16 has a 3.4mm hole ie. you throw in a full 1/8" ceramic wick with a smile
Ultra light weight and classy combo that has to be considered as an hybrid and the only one in that size (with the performance and built of the DID).
I mean, you take a few good pics and you put it on a list, ppl would be crying to get a spot...

 

[Buzzsaw46]

It's here!! All set up in short mode. I can only find a small blemish on the cap, I'm sure I will do far worse to it in normal use. At first I thought the draw was a bit tight, but I'm getting used to it now and it isn't bad. It looks great on my Roller with an 18350 in it, not top heavy looking at all.

 

[donnah]

awww you beat me! Mine's still in Louisville and is scheduled for delivery tomorrow. I was planning on going to Asheville to visit my daughter tomorrow

My EA came today and it's beautiful. The clone that I had set up for slr is out of order (bottom insulator is torn) so all I have right now is my older did and it's set to 1.2. But it's a great vape on the EA.. till the batt dies a little, then I can tell the voltage is dropping. It's working so well, I don't want to mess with the coil.

I"m still a little unsure of this unprotected mech mod thing. I'm so used to the protection I have on my provari's, I don't want to blow anything up. When I was messing with the clone, I put it on the EA and when I tried to fire it, the shortstop chip I had in the EA activated and I can still smell the smoke. Do you guys use one of the shortstop/2 cent fuses in these mech devices?

 

[Buzzsaw46]

I'm hoping the hot spring will keep me safe with the Roller.

I didn't even check the resistance on the DID, seems a bit higher than what I have on the AC9. Yep, just checked and DID is 1.4ohms, the AC9 is 1.0. May have to drop a coil on the DID. Dropped a coil and it is 1.1ohms now, that's better

 

[Rule62]

awww you beat me! Mine's still in Louisville and is scheduled for delivery tomorrow. I was planning on going to Asheville to visit my daughter tomorrow

My EA came today and it's beautiful. The clone that I had set up for slr is out of order (bottom insulator is torn) so all I have right now is my older did and it's set to 1.2. But it's a great vape on the EA.. till the batt dies a little, then I can tell the voltage is dropping. It's working so well, I don't want to mess with the coil.

I"m still a little unsure of this unprotected mech mod thing. I'm so used to the protection I have on my provari's, I don't want to blow anything up. When I was messing with the clone, I put it on the EA and when I tried to fire it, the shortstop chip I had in the EA activated and I can still smell the smoke. Do you guys use one of the shortstop/2 cent fuses in these mech devices?

I don't use the fuses. I just check the resistance of my coil with a multi meter. I don't go below .9Ω with my coil builds.

 

[donnah]

my DID on the EA

 

[donnah]

what gauge wire are you guys using?

 

[Rule62]

what gauge wire are you guys using?

I use 28ga on mechanicals.

 

[Buzzsaw46]

28ga here also.

 

[Alexvac]

Ill jump on this bandwagon also, I have a DID mini and have no problems with it what-so-ever.