Problem with Smok tech dcc?

[Bauldronius]

Hi i just started to use cartomizers and i bought LR smok Tech dual coil cartomizers because everyone seems to think they are as good or better than boge LR cartomizers. But in my experience i get a huge TH nice flavor but almost no vapor. The same juices in other atomizers and in boges produce deacent amount of vapor.

So my question is are my smok techs faulty or is this normal.
My pv is e-power 18650.

*SOLVED*
Thx RIMP for the fix
They were overfilled

 

[AttyPops]

Random thoughts.....

how thick is the e-juice? What PG/VG ratio?

Thin it if you think it's a wicking issue.
Add VG if it's 100% PG juice.

DCC's are cooler coils (2x 3.2 ohm coils). Try an IMR battery on that if you can, or maybe a 18650 with a higher 'C' raiting if it's not putting out the amps (need 1.6 amps). Not all batteries are created equal. In other words, it could be too cool, the TH is just bad vaporization, and the amps insufficient to properly atomize the e-juice.

 

[scalewiz]

I never was impressed with dual coil performance on 3.7 volts. They didn't seem to start to come alive until I got them a little over 4 volts. You may like these more on a 5 volt box mod or VV device.

 

[Pirttila]

E-Power 18650 with dual coil cartomizers here and lot of vapor... Maybe your e-liquid is 100% PG, i use 50/50% mix PG/VG.

 

[RIMP]

I love these dc's. Sometimes if I overfill I get great flavor but next to no vapor. Could this be the case? I'd try and blow some liquid out and see if that helps My nickel.

 

[WomanOfHeart]

I'm using the SmokeTec DCC with my Liquinator tank on a 3.7V mod and not having any problems. It really kicks ... when I put it on my 5V PT! My juice mixes are usually 60PG/40VG or 50/50. I have a 70PG/30VG mix in there now and I really don't like it.

 

[emus]

I did some vapor production tests.
At 3.7v broken in 2.4 ohm CE2 produced much more vapor than 1.6ohm DC.
Pump the voltage up to 4.2 and DC kicks in and makes good vapor.

I would like to try a 1.25ohm DC at 3.7v because 1.6ohm is decent but a little under performing.
PV must be capable of about 3.5 amps to handle that combo.

 

[abah]

Mine working perfectly with Ego batt... Nice TH and vapor. Thinking of buying more...

 

[bjannr]

I've used th DC's on my Reo at 3.7. Had plenty of vapor until they started getting a bit stiff to draw.

 

[classwife]

Going to agree with Rimp...unscrew it and blow it out a little.....I also only have trouble if it's too full.

 

[Bauldronius]

I love these dc's. Sometimes if I overfill I get great flavor but next to no vapor. Could this be the case? I'd try and blow some liquid out and see if that helps My nickel.

Thank you i did as you suggested and now everything is dreamy tons of vapor and flavor.

 

[classwife]

Great going !!!