Product Requests

[Dieseler]

I see the <Zmax mini> oversea's which comes with extra bottom cap uses imr 18350 battery or with other supplied cap 18500 battery and is about 95 mm compared to the vamo's i use the Zmax mini according to dimensions is 1/4 inch shorter than the vamo.

Currently useing several Vamo's and Zmaxv2 once sweet spot is found set em and just keep changing batteries - love em.
Siegeli zmax clone is sitting once again as i had to reglue its 510 connector which pops out of the top cap when simply knocked over the others above mentioned never do that.

Bring on the Smoktech Zmax Mini . ; )

 

[BuGlen]

Eric - Have you looked into the Kanger EVOD (clearo) yet? They seem to have two products by that name, one being the full kit (battery and clearo) and the other just being the clearo. These appear to be a new direction in the bottom coil T3 line and they are getting some attention.

 

[Zooker]

No I do not

The last batch was entirely different and not in a good way, too many complaints so I did not reorder.
I will get a sample when they come back from Vaca and if it is good, I will order again.

Oh man, I thought it was just mine that were bad! I'd bought 4 or 6 boxes from ya some time ago, and they'd sat in my stash for a couple of months while I was fiddling with other stuff, and I got them out to use them the other day, and I had 3 out of 3 short out or something all in the course of one day. They were fine initially when I filled them, reading around 2.5-ish on my Provari, and then shortly after, they started tasting horrible with every vape, and when I checked their resistance they had dropped to between 1.3 and 1.6.

Will be waiting and watching to see what you think of your sample if and when you get one.

 

[SimianSteam]

Any chance of getting the BT804 'Dream' tank in Stainless instead of chromed whatever?

 

[Bizrad8381]

I know of a place that has the KING Pipe PM me if you want to know. NVM out of stock sorry

 

[firechick]

Any chance you could get fuses for mods like the Vape Safe or ShortStop? Would love to get some more reuseable ones. TYIA!

 

[Section1]

Probably been asked but can you carry the non resistive wire? It is needed on some coils. Thanks.

 

[gormly]

Probably been asked but can you carry the non resistive wire? It is needed on some coils. Thanks.

I am getting some hopefully this week a friend is sending it to me.

Just so you all know if you didn't already you can get tons of it cheapo at Michaels Crafts or Walmart in store.
it's the silver wire they use for beading.

 

[gormly]

Any chance of getting the BT804 'Dream' tank in Stainless instead of chromed whatever?

I will ask when they get back.

Any chance you could get fuses for mods like the Vape Safe or ShortStop? Would love to get some more reuseable ones. TYIA!

Yep, I looked into it but had some pricing issues with it, will investigate it again soon.

 

[AG51]

Eric - Have you looked into the Kanger EVOD (clearo) yet? They seem to have two products by that name, one being the full kit (battery and clearo) and the other just being the clearo. These appear to be a new direction in the bottom coil T3 line and they are getting some attention.

I really like the EVOD clearos Eric Would be nice if you carried them.

 

[Atlantisboy]

I would totally buy this if you would get them - I don't think anyone in the US is carrying them yet - looks like a huge improvement over the 601:

King

I would love a pipe too and as nobody in the USA carries them I think they would sell very well, any chance of getting some in Eric?

 

[gormly]

Pipes.. a sore spot for me, I sold them once.. but by sold I mean I had them until I put them on sale for half price, not appealing to do that.
Not sure, are they better now, is there now a following, I'd hate to get 50 and sell two. Maybe I can get them thrown in with an order and not have to meet a minimum.

Post a list of the specific pipe you might want and if you have the manufacturer I will check it out.
(this is for everyone I can order them all at the same time)

 

[Atlantisboy]

Thanks Eric ,the pipes most people are interested in are fully mechanical so no PCB and nothing to break, you can use them with a Genesis and they make a nice change from tube mods. The company Beautiful make the King Pipe Series and are well priced. Here is a link to the Black Sandal wood pipe which is the one I really want , I would be happy with just the pipe head don't need the kit. If you could get hold of a few that would be great , there have been a few people on the forum looking for them Thank you

Black Sandalwood King Pipe

Pipes.. a sore spot for me, I sold them once.. but by sold I mean I had them until I put them on sale for half price, not appealing to do that.
Not sure, are they better now, is there now a following, I'd hate to get 50 and sell two. Maybe I can get them thrown in with an order and not have to meet a minimum.

Post a list of the specific pipe you might want and if you have the manufacturer I will check it out.
(this is for everyone I can order them all at the same time)

 

[chuckie]

Those are the curved non- drip tips I requested a few days ago.I'd still take 4or 5 of the tips and know of a few other people who would like the tips.They fit 510 openings...Thanks again.

 

[VaporChef]

Hi, I've been watching your site for days checking for stock updates.

I'm wondering when you will have more SS mesh and Kanthal wire choices available? Thanks!

 

[BuGlen]

Eric - Please look into these when you get the chance: Kanger ProTank

http://www.youtube.com/watch?v=dHOywpSXGEo

 

[Atlantisboy]

Eric - Please look into these when you get the chance: Kanger ProTank

Kanger protank - YouTube

That looks good

 

[gormly]

Hi, I've been watching your site for days checking for stock updates.

I'm wondering when you will have more SS mesh and Kanthal wire choices available? Thanks!

Kanthal is all in stock, the mesh is coming back soon.

 

[gormly]

Eric - Please look into these when you get the chance: Kanger ProTank

Kanger protank - YouTube

It's already primed and ready for order along with the EVOD (which is already ordered)

 

[gormly]

Thanks Eric ,the pipes most people are interested in are fully mechanical so no PCB and nothing to break, you can use them with a Genesis and they make a nice change from tube mods. The company Beautiful make the King Pipe Series and are well priced. Here is a link to the Black Sandal wood pipe which is the one I really want , I would be happy with just the pipe head don't need the kit. If you could get hold of a few that would be great , there have been a few people on the forum looking for them Thank you

Black Sandalwood King Pipe

Ok, will request some "samples" when they come back from Holiday.