- Status
Any decision on the Vapeonly Bcc? I'm wondering if I should wait or order elsewhere. I'm using them exclusively now and I want a bunch more.
Here a request with pics and manufacturer: http://www.e-cigarette-forum.com/forum/discountvapers/284732-product-requests-42.html#post8678141
PBusardo did a good youtube review. I was going to insert it in this post but the video has another vendor's name plastered all over it.
Here a request with pics and manufacturer: http://www.e-cigarette-forum.com/forum/discountvapers/284732-product-requests-42.html#post8678141
PBusardo did a good youtube review. I was going to insert it in this post but the video has another vendor's name plastered all over it.
Last edited:
this one is hard for me, I have conflicting reviews I am not sure if it is a batch issue or not, I should just bite the bullet and order some. I will soon I think.
I have been checking every day for these... Will they be in the new release thread?
What time Monday will give me a chance to order what I want without the dreaded "Sorry Out of Stock" message that has crushed my soul so many times in the last few weeks?
Also know I am still holding out waiting for vision vivi novas and vision coiled heads. I have a drawer full of other stuff that was supposed to be rebuildable but the coil heads that are supposed to fit it ... don't.
What time Monday will give me a chance to order what I want without the dreaded "Sorry Out of Stock" message that has crushed my soul so many times in the last few weeks?
Also know I am still holding out waiting for vision vivi novas and vision coiled heads. I have a drawer full of other stuff that was supposed to be rebuildable but the coil heads that are supposed to fit it ... don't.
My innokin order is shipping today
i30's, iclear, MVP, Ucan, SVD!
So if they follow through today, it will be Monday hopefully
They left Hong Kong last night! Darn it, should have been Saturday.. figures. But that means it's in the USA by now.
Anyway, when I get tracking that says it left Hong Kong that usually means it's 1-2 days out, so tomorrow or Wednesday.
I will post in the New Products releases thread about them and the general thread (if I remember I will also post here)
Anyway, when I get tracking that says it left Hong Kong that usually means it's 1-2 days out, so tomorrow or Wednesday.
I will post in the New Products releases thread about them and the general thread (if I remember I will also post here)
Eric, is there any way, if, when you reorder the Kamry K100's, you could find out if they will sell the "shields" separately? I'm in a COOP (no more for me!), and they didn't ship the shields. Would be more than happy to buy several
Yes they are in the Innokin order, they are off the site because it was one product that kept glitching back into stock (happens a lot)
Eric, is there any way, if, when you reorder the Kamry K100's, you could find out if they will sell the "shields" separately? I'm in a COOP (no more for me!), and they didn't ship the shields. Would be more than happy to buy several
I will ask about them next order.
The conflicting reviews are accurate. The BCC heads need to be adjusted to your juice thickness. There are 2-3 thin flavor wicks on top of the main coil. Depending on your juice thickness, some of them need to be removed. I do this when the heads are fresh out of the pack.
Some people have posted about having trouble getting the heads apart. The trick is to hold the base firm and rock the top. It'll pop right off. Pulling on the top will get you nowhere.
Ideally, I would like something that requires "zero setup" but removing the flavor wicks is so easy and simple I'm happy to do it. I'm getting the best vape of my life off these and I've tried a lot of equipment. I'm even finding that I like juices that I didn't like previously on other equipment.
The BCC may not be for everyone given the setup required but you carry other other things that require fiddling, and unlike most vendors you warn customers that they may have to do some fiddling.
I'm seeing the BCC Mega at a lot of other vendors lately. What I have not seen is a NON-Mega BCC. Does it exist? It would be interesting to inquire if/when you order. I only fill my BBC's 1/2 way because it lasts me through the day and then some. A shorter non-Mega BCC would be awesome.
I'm looking to buy 5-10 black/black BCC's. You wouldn't get stuck with many if you kept your initial order small and stuck to black/black.
I'd also buy a few packs of heads, higher ohms preferred.DISCLAIMER: I vape on a VV device. These may be a total fail on non-VV devices.
Any chance of getting 500 SS mesh and ribbon kanthal wire?
Any word on getting brushed SS Igo-L?
Any word on getting brushed SS Igo-L?
Not that I know of, I do not have a manufacturer for it.
I asked was told they did not have it, so either they sold out or...
Hey Eric are you getting the RSST Ac9 Clone? If you are can you get extra tanks please. Thank you.
I have one and they are really nice , better than the AGA .
I have one and they are really nice , better than the AGA .
working on it.
Working on this too, the only issue is I have contacted them three times asking to place an order and each time they say "no stock"
so not sure at this point if I have po'ed them with my pricing or they just don't have anything right now.
here is a manufacture for kanthal ribbon wire.
Electric heating elements and heating system controls for industrial heating.
Hey,
I understand you can't give specific dates as to when you are getting in items that are out of stock. But can you give an estimate?
I got a variable voltage ego type battery from you, but I need one that goes up to a higher voltage. BUT I don't like the super long batteries. ( by the way I think you are the only vender who lists the height and width, so BIG thanks for that)
So I want to wait until you get in more of the shorter 900mah or higher vv batteries. Can you give some type of estimate on the time frame or is there no way to know?
I understand you can't give specific dates as to when you are getting in items that are out of stock. But can you give an estimate?
I got a variable voltage ego type battery from you, but I need one that goes up to a higher voltage. BUT I don't like the super long batteries. ( by the way I think you are the only vender who lists the height and width, so BIG thanks for that)
So I want to wait until you get in more of the shorter 900mah or higher vv batteries. Can you give some type of estimate on the time frame or is there no way to know?
Not sure about the ohms, I've always wished there was a link with a list of gages and
number of coils for certain ohms.
You may have to call them. I see on the "Resistance Alloys" page that their lowest width
listed for ribbon wire is .04, and one of the vendors that carries it has it listed at .02.
Also not sure if it is Kanthal A1 or Kanthal D for ribbon wire.
You could probably contact "almightygod" ( ecf member ) for some info.
number of coils for certain ohms.
You may have to call them. I see on the "Resistance Alloys" page that their lowest width
listed for ribbon wire is .04, and one of the vendors that carries it has it listed at .02.
Also not sure if it is Kanthal A1 or Kanthal D for ribbon wire.
You could probably contact "almightygod" ( ecf member ) for some info.
- Status
Similar threads
