Product Requests

Status
Not open for further replies.

gormly

Unregistered Supplier
ECF Veteran
Jun 9, 2011
4,504
7,464
Connecticut USA
www.discountvapers.com
Just had to post to say, yet again, what a great guy our Eric is.

I had asked for the K100 carto cover/shield, because I was in a Coop that got hosed by Kamry, and, lo and behold, he went and got them!!

Thanks sooo much for all you do, Eric :)

well to be fair, I was already ordering from Kamry so no big deal, but the price on that shield is way too high, I didn't look at the PI that closely but when I did after I got them I was like.. what???? so unfortunately the price is high on the site also. I should have negotiated, didn't think it would be that high and just asked him to add them on.

Maybe I can cost average on the next order. :)
 

Stoneface

Vaping Master
ECF Veteran
Verified Member
Jan 12, 2013
9,022
51,561
New York
OK, now I see what you mean by confusion with #19 and #9. The #19 with the magnetic bottom switch has it's own page on the sigelei site for some reason...TELESCOPIC-19_TELESCOPE_SIGELEI Electronic Cigarette -. The #20 WinchelNomNom referred to has already been pictured here, but to be clear:) look here and here. I personally vote for #20, if DV is a democracy:)

And, well, if you have any of those little nuts that fits the AGA-T2 that you carry, I would be glad to purchase some from you :D but no pressure. I stole one of those nuts to put on another AGA-T that I got from Ms. Frustrated... And if I find the right kind of nut expert, I'll let you know :D

EDIT: Sorry to post this here, but thought it might be worth a look for you...Vapor Joe's.
 
Last edited:

Cookster

Ultra Member
ECF Veteran
Verified Member
Oct 5, 2011
1,792
1,889
Fla-De-Da
well to be fair, I was already ordering from Kamry so no big deal, but the price on that shield is way too high, I didn't look at the PI that closely but when I did after I got them I was like.. what???? so unfortunately the price is high on the site also. I should have negotiated, didn't think it would be that high and just asked him to add them on.

Maybe I can cost average on the next order. :)

Price wasn't a problem for me, so again, I'll just say thanks ;)
 

gormly

Unregistered Supplier
ECF Veteran
Jun 9, 2011
4,504
7,464
Connecticut USA
www.discountvapers.com
OK, now I see what you mean by confusion with #19 and #9. The #19 with the magnetic bottom switch has it's own page on the sigelei site for some reason...TELESCOPIC-19_TELESCOPE_SIGELEI Electronic Cigarette -. The #20 WinchelNomNom referred to has already been pictured here, but to be clear:) look here and here. I personally vote for #20, if DV is a democracy:)

And, well, if you have any of those little nuts that fits the AGA-T2 that you carry, I would be glad to purchase some from you :D but no pressure. I stole one of those nuts to put on another AGA-T that I got from Ms. Frustrated... And if I find the right kind of nut expert, I'll let you know :D

EDIT: Sorry to post this here, but thought it might be worth a look for you...Vapor Joe's.

Request is in for the 20 as shown in the pic, I like that one. :)
 

gormly

Unregistered Supplier
ECF Veteran
Jun 9, 2011
4,504
7,464
Connecticut USA
www.discountvapers.com
Eric- Do you have any vv batteries coming in soon? Everything I look at is out of stock. I need to upgrade from the 650 I got from you and they are all gone!!!

Hi

which one are you looking for?

I have standard eGo battery VV's, I have Twists (two kinds) and I have a bunch of VV and VW's in the APV section.
Let me know which I will try to point you in the right direction :)

The 900 eGo battery VV:
eGo Variable Voltage 900mAh Battery - Black w/Rubber Button
1100:
eGo-Variable Voltage 1100mAh Battery - Black w/Rubber Button
(both come in stainless)

The Twists:
Twist Batteries

the above combined in one section:
eGo VV Batteries

if none of those are what you are looking for let me know.
 

GaMntGirl

Vaping Master
ECF Veteran
Verified Member
Oct 4, 2012
3,068
18,746
North Georgia
Hi

which one are you looking for?

I have standard eGo battery VV's, I have Twists (two kinds) and I have a bunch of VV and VW's in the APV section.
Let me know which I will try to point you in the right direction :)

The 900 eGo battery VV:
eGo Variable Voltage 900mAh Battery - Black w/Rubber Button
1100:
eGo-Variable Voltage 1100mAh Battery - Black w/Rubber Button
(both come in stainless)

The Twists:
Twist Batteries

the above combined in one section:
eGo VV Batteries

if none of those are what you are looking for let me know.

I've looked at so many now I confruzed. I think I want a vv that increments in 0.1 and goes to 5 or 6 volts. The ovale v8? What would you suggest? Price range is very low I got $75 to spend on battery protank and juice DIY need glass/polypropylene tank because of cracking. This will be my 4 th order with you.
 
Last edited:

gormly

Unregistered Supplier
ECF Veteran
Jun 9, 2011
4,504
7,464
Connecticut USA
www.discountvapers.com
I've looked at so many now I confruzed. I think I want a vv that increments in 0.1 and goes to 5 or 6 volts. The ovale v8? What would you suggest? Price range is very low I got $75 to spend on battery protank and juice DIY need glass/polypropylene tank because of cracking. This will be my 4 th order with you.

The vamo is just a hair under 50, but it's a large mod. The V8 is coming back (improved) but it's still not here yet.
all the rest of the standard eGo sized thin twist or VV batteries only go up to 4.8 (4.2 for the vv, 4.8 for the twist)
 

GaMntGirl

Vaping Master
ECF Veteran
Verified Member
Oct 4, 2012
3,068
18,746
North Georgia
The vamo is just a hair under 50, but it's a large mod. The V8 is coming back (improved) but it's still not here yet.
all the rest of the standard eGo sized thin twist or VV batteries only go up to 4.8 (4.2 for the vv, 4.8 for the twist)

Any clue how long till the V8 arrives? I don't mind big. Maybe I'll just get the tank for now
 

gormly

Unregistered Supplier
ECF Veteran
Jun 9, 2011
4,504
7,464
Connecticut USA
www.discountvapers.com
Hey guys. Eric (or anyone else who may know the answer), do you know if and when you will be stocking the dream v2 rebuildables? I was a big fan of the first ones and a lot cheaper/easier to get then the kayfun!

Ok so I have been getting this a lot and because of Beautiful's naming scheme we have to be clear.
From what I know there is no V2, all it is is an extended BT804, they just added parts to make it bigger.
I ordered the extended version AND I ordered the parts to extend one someone already has.

so I do not think there is technically a V2, just one with extender parts.

This is from them direct so unless they are just not telling me something. I have the "V2" coming. :)


Any clue how long till the V8 arrives? I don't mind big. Maybe I'll just get the tank for now

It's late, I put in an inquiry (again)
 

Cookster

Ultra Member
ECF Veteran
Verified Member
Oct 5, 2011
1,792
1,889
Fla-De-Da
Morning All!

Eric, these look fabulous...pretty please get some :)

Catch3313(04-18-(04-18-16-28-40).jpgCatchD286(04-18-(04-18-16-28-40).jpg
 
Status
Not open for further replies.

Users who are viewing this thread