I'm helping someone whos had cancer, and therefore safety is extremely important.
They are using a Vamo 2 with Protank II Pyrex tank. I want to get silica out of the equation, and therefore the best choice is cotton. I will make around 10-20 coils at a time.
As safety is an issue, id rather avoid super-heating the fluids for fear that the heat will do something to the ingredients that could potentially be dangerous. Therefore safety is more important than amount of vapour and taste.
What should I pick for the protank II rebuild with cotton?
1) Regular coil or micro coil?
2) 28 ga, 30ga or 32ga kanthal?
3) I'm thinking a > 2.0 ohm is desireable, as its a colder vape - correct?
4) will a 28ga 2.0 ohm micro coil be hotter than a 2.0 32ga regular coil, as the coils are all next to each other and heating each other up?
5) Lets say 5 wraps of 32 ga = 2.5 ohm, would it be OK to wrap those 5 wraps like a microcoil (up against each other) or do they need to be spaced out and not touching like the stock coils?
They are using a Vamo 2 with Protank II Pyrex tank. I want to get silica out of the equation, and therefore the best choice is cotton. I will make around 10-20 coils at a time.
As safety is an issue, id rather avoid super-heating the fluids for fear that the heat will do something to the ingredients that could potentially be dangerous. Therefore safety is more important than amount of vapour and taste.
What should I pick for the protank II rebuild with cotton?
1) Regular coil or micro coil?
2) 28 ga, 30ga or 32ga kanthal?
3) I'm thinking a > 2.0 ohm is desireable, as its a colder vape - correct?
4) will a 28ga 2.0 ohm micro coil be hotter than a 2.0 32ga regular coil, as the coils are all next to each other and heating each other up?
5) Lets say 5 wraps of 32 ga = 2.5 ohm, would it be OK to wrap those 5 wraps like a microcoil (up against each other) or do they need to be spaced out and not touching like the stock coils?
