Provari Mini
- Thread starter MonsterKenny
- Start date
- th_trl_thread_readers 0
- Status
Yeah, I wish the end caps were flush with the body.. I think I saw a pic of this on a Provari, though, and it looked really nice... trying to find a pic
Here's one I found
Not bad, but actually looking at that PVX one, I like the tapered end caps better! Hmmm, decisions, decisions...
Not bad, but actually looking at that PVX one, I like the tapered end caps better! Hmmm, decisions, decisions...
i dunno, still looks like a thread spool, only now, its attatched to a provari.. lol. sorry. hehehehe
i love the vpx's, because of the colors. i really want the pink one. or the kelly green, or the saphire blue. they really stand out in their pics.
i love the vpx's, because of the colors. i really want the pink one. or the kelly green, or the saphire blue. they really stand out in their pics.
No offense here, they aren't my tanks
just looked at the PVX tanks... wow these are nice!
just looked at the PVX tanks... wow these are nice!
ahhhh, i thought you mispelled VPX tanks. okay, now THOSE are nice. Love the first one. i like knowing how much juice is in em. Did you see the colored VPX ones?
http://shop.nhaler.com/media/SS VPX tank.jpg
http://shop.nhaler.com/media/SS VPX tank.jpg
Woops, yeah VPX
Yeah those are nice, too! I like knowing the juice level as well, which is why I like those Who's Your Daddy tanks.. I wish those VPX tanks had a little window!
This is gonna be a tough decision
Yeah those are nice, too! I like knowing the juice level as well, which is why I like those Who's Your Daddy tanks.. I wish those VPX tanks had a little window!
This is gonna be a tough decision
Ok ... 1st day with the Mini, and the batt is not lasting as long as I had hoped. I got about 3 hrs on the 18350.
Which would have a longer run time? 1.7-2ohm at 3.7v +/- or 3ohm at 4.8-5v?
I would like to keep the Mini smaller, so would like to stick with the 18350s .....
Envi - I read what you had put earlier .... higher ohms at higher volts, correct?
Which would have a longer run time? 1.7-2ohm at 3.7v +/- or 3ohm at 4.8-5v?
I would like to keep the Mini smaller, so would like to stick with the 18350s .....
Envi - I read what you had put earlier .... higher ohms at higher volts, correct?
Last edited:
were you vaping alot? or average? had it in your hand basically the whole time?
Meems
Meems
I won't deny that it's expensive, but I can't stress how well it works. The same punch in the same place, every time. No guessing required.
I do vape alot, plus I was playing with the menu a bit ... I don't think I would EVER get a day out of a 18350 though. About 3 hrs is average, I was just hoping for more.
The button started blinking - means it's time to change the batt, right?
Oh, and I was using 2ohm at 3.7v-ish ....
The button started blinking - means it's time to change the batt, right?
Oh, and I was using 2ohm at 3.7v-ish ....
I think they recommend the 1.5 dcc/tank combo, but were you using a tank?
if the button starts blinking, i believe it explodes', but not sure.
lol
omygaaa, guess what i just did? i boiled 5 dcc's that go with the tank, then baked em for 2 hours and i just put one in my tank and not only did it work, it worked beautifully! how bout them apples'?
its not that i'm cheap, its the effing shipping charges that go with the merch' that i hate.
Meems
if the button starts blinking, i believe it explodes', but not sure.
lol
omygaaa, guess what i just did? i boiled 5 dcc's that go with the tank, then baked em for 2 hours and i just put one in my tank and not only did it work, it worked beautifully! how bout them apples'?
its not that i'm cheap, its the effing shipping charges that go with the merch' that i hate.
Meems
'Sorry to post so much, i know this isnt a chat room, hehehehe. But one question for anyone: "i'm ordering the dcc replacement cartos for the 6ml tank, now i cant remember which, should i be getting the 1.5ohms or the 2.5?
..for battery purposes, i want the one that uses less battery'.
thanksies in advancies!
..for battery purposes, i want the one that uses less battery'.
thanksies in advancies!
The 2.5 ohm will pull less amps out of the battery which should result in longer battery life. Example:
10 watts for both cartos:
1.5 ohm @ 3.87 volts = 2.58 amps
2.5 ohm @ 5.00 volts = 2.00 amps
These would both result in 10 watts so a close to identical vape while the 2.5 ohm cartos would only pull about 75% of the current.
You would also be able to "fine tune" the voltage on the 2.5 ohm carto more than the 1.5 ohm. Here's the numbers for some other resistances (at 10 watts)
1.25 ohm @ 3.54 volts = 2.83 amps
2.00 ohm @ 4.47 volts = 2.24 amps
3.00 ohm @ 5.48 volts = 1.83 amps
Keep in mind that some people like to go really hot with dual coils, so 3 ohms might cap out too early for at 6 volts and 12 watts. Personally I think the 2.5 ohms DCC's work best on the provari.
10 watts for both cartos:
1.5 ohm @ 3.87 volts = 2.58 amps
2.5 ohm @ 5.00 volts = 2.00 amps
These would both result in 10 watts so a close to identical vape while the 2.5 ohm cartos would only pull about 75% of the current.
You would also be able to "fine tune" the voltage on the 2.5 ohm carto more than the 1.5 ohm. Here's the numbers for some other resistances (at 10 watts)
1.25 ohm @ 3.54 volts = 2.83 amps
2.00 ohm @ 4.47 volts = 2.24 amps
3.00 ohm @ 5.48 volts = 1.83 amps
Keep in mind that some people like to go really hot with dual coils, so 3 ohms might cap out too early for at 6 volts and 12 watts. Personally I think the 2.5 ohms DCC's work best on the provari.
Last edited:
I dont know why i'm not getting this. i think its because i'm thinking lower ohms means lower battery and it seems its the opposite of that.
okay so i'm getting the 2.5's then? lol. there's a sale tonite on a cdn website and at 12pm i'm going to be ordering 5 of the replacement dcc's, so i'm officially getting the 2.5 because the battery will last a touch longer , vaping around 4.7 volts, correct Vaptimist?,
sorry , this really reminds me of math in school, of which, i sucked.
okay so i'm getting the 2.5's then? lol. there's a sale tonite on a cdn website and at 12pm i'm going to be ordering 5 of the replacement dcc's, so i'm officially getting the 2.5 because the battery will last a touch longer , vaping around 4.7 volts, correct Vaptimist?,
sorry , this really reminds me of math in school, of which, i sucked.
meems - here is this ohms thing .... LOL I remembered someone showed it before. You want to keep your amps low, I think, for longer batt life, so you can plug #s in and see what's best.
Ohms Law Calculator
Ohms Law Calculator
- Status
Similar threads
- Locked
