I got the stuff to do the puck mod on the net. Well all together the light comes on but as soon as i screw the atty in the light does not come on iv checked the wireing couple times and everything looks right. Any ideas?
puck mod
- Thread starter erawtik
- Start date
- th_trl_thread_readers 0
- Status
check your grounds/continuity,
not to sound like a douche but is the on off switch switched on, and or wired correctly?
sounds like a continuity problem
not to sound like a douche but is the on off switch switched on, and or wired correctly?
sounds like a continuity problem
when i hit the on button and press the fire button the light comes on. But the second i screw the atty down light goes out. And i used pos to the long wire on the led and black to the short wire on led.
Don't know. Do you have another batt connector you can use? I used a pre wired 510 on mine that I got from mad vapes.
I did get something like what your getting, when I screwed in my Phoenix and it the coil was shorting out on the housing of the
Phoenix. I would try another atty and then try a different connector.
I just started a new ECF group for Puck Users that needs members.
http://www.e-cigarette-forum.com/forum/groups/puck-users.html
I did get something like what your getting, when I screwed in my Phoenix and it the coil was shorting out on the housing of the
Phoenix. I would try another atty and then try a different connector.
I just started a new ECF group for Puck Users that needs members.
http://www.e-cigarette-forum.com/forum/groups/puck-users.html
Last edited:
- Status
Similar threads
