pure cotton?

Status
Not open for further replies.

AXIOM_1

Vaping Master
ECF Veteran
  • Jul 6, 2015
    4,874
    12,939
    Pennsylvania, USA
    I am currently using the Arctic sub ohm tank. Originally, I was purchasing the pre built factory coils but early on decided I didn't want to always have to purchase the things so I started rebuilding the coil heads. I usually just use any ole cotton for my wicking as it is readily available but just recently I ordered some "pure Japanese cotton" straight out of Japan. I had done some reading that talked about how good pure Japanese cotton is and how it is recommended over cotton from cotton balls. Anyway, I just rebuilt a coil head tonight with the new Japanese cotton and am getting a reading of 0.7 ohm resistance. After priming it, I fired it, and man did I get the most awful taste...yuck! So, I messed around for awhile and fired it some more and took a few more hits off of it and kept getting the same yuck taste. I was positive I didn't burn the coil because I do the rebuilding process often and am used to it and never had any issues before.

    Finally, after going through about 1/4 of a tank of liquid, the yuck taste started going away and the flavor of my juice started making itself known. I am trying to figure out what the deal is with these organic cotton sheets. Do they normally taste like junk for a bit when first wicking the coils?
     

    AXIOM_1

    Vaping Master
    ECF Veteran
  • Jul 6, 2015
    4,874
    12,939
    Pennsylvania, USA
    I got these things through Amazon and they were shipped directly from Japan ... I gotta quit shopping for my vaping stuff from amazon.... Anyway, I also rebuilt my coils and so maybe it had something to do with that. No matter, the taste is fine now .... If it happens any more then I will simply scrap the cotton and get it from a reputable vape place. But, before I jump to conclusions, I will keep using the cotton and see what happens. Thanks for the help.
     

    Bunnykiller

    ECF Guru
    ECF Veteran
    Verified Member
    Nov 17, 2013
    17,431
    77,275
    New Orleans La.
    if it was grown in Japan, processed in Japan, packaged in Japan, and shipped from Japan, I suppose it was "pure Japanese" cotton unlike an American car that was made in Brazil, assembled in Mexico, shipped from where ever, and sold in the US....

    btw, 80+% of the cotton used in Japan comes from India.....
     
    • Like
    Reactions: AXIOM_1

    AXIOM_1

    Vaping Master
    ECF Veteran
  • Jul 6, 2015
    4,874
    12,939
    Pennsylvania, USA
    On the Japanese cotton sheets there is a skin-like layer on the outsides of the sheet used to hold it together. You should peel those thin layers off before using the cotton.


    ouch! I did not do that....yes, there was some thin skin like layers but I left them on....... Okay, I will do that next time I wick and see if that is what the problem was....... If not, then I got some bad cotton from some strange place on the globe lol.
     

    Completely Average

    Vaping Master
    ECF Veteran
    Jan 21, 2014
    3,997
    5,156
    Suburbs of Dallas
    Oh my. Yeah, I suspect the yuck was the outer layers. Peel them off and just use the filling. I have also used Egyptian cotton to good effect. Pricy, though. I didn't think it was enough better to justify the cost.

    Egyptian cotton really isn't any different from Japanese cotton.

    In reality it's all Gossypium Badbadense cotton. It's a long fiber cotton grown all over the world, and all of it originated in the Americas. Cotton is native to North and South America, and was exported for growth in other countries. In the US the same cotton is known as either American Egyptian or American Pima cotton.
     

    suprtrkr

    ECF Guru
    ECF Veteran
    Verified Member
    Jun 22, 2014
    10,409
    15,050
    Cowtown, USA. Where the West begins.
    Egyptian cotton really isn't any different from Japanese cotton.

    In reality it's all Gossypium Badbadense cotton. It's a long fiber cotton grown all over the world, and all of it originated in the Americas. Cotton is native to North and South America, and was exported for growth in other countries. In the US the same cotton is known as either American Egyptian or American Pima cotton.
    Lol, and I live in Cotton Country and didn't know that :)
     

    AXIOM_1

    Vaping Master
    ECF Veteran
  • Jul 6, 2015
    4,874
    12,939
    Pennsylvania, USA
    Update: I rebuilt another coil just for an experiment and did as suggested by removing the outer skin like layer of the cotton pads. I wicked the coils and fired it up and all is great. No more yuck flavor, so the problem was indeed caused from not removing the outer layer of the cotton pads. Just thought I would let you all know.
     
    • Like
    Reactions: _JB_

    Alien Traveler

    Vaping Master
    ECF Veteran
    Jul 3, 2014
    4,402
    5,789
    United States
    Update: I rebuilt another coil just for an experiment and did as suggested by removing the outer skin like layer of the cotton pads. I wicked the coils and fired it up and all is great. No more yuck flavor, so the problem was indeed caused from not removing the outer layer of the cotton pads. Just thought I would let you all know.
    I do not remove any layers from pads. No bad taste at all and easier to wick. You may want to try again.
     
    • Like
    Reactions: AXIOM_1

    Completely Average

    Vaping Master
    ECF Veteran
    Jan 21, 2014
    3,997
    5,156
    Suburbs of Dallas
    No. Cotton was domesticated in different places around the world. I was pretty widespread plant. In India it was cultivated in BC years. Old stuff.

    The "cotton" that was cultivated outside of the Americas in ancient times is not what you and I recognize as cotton. It is a tree that produces fibrous bulbs.

    Cotton-Tree-1237866.jpg

    Gossypium_herbaceum_004.JPG



    It's much the same as corn, which prior to landing in the Americas was what Europeans called this:
    ancient-grains-you-may-have-never-tried.jpg
     

    Alien Traveler

    Vaping Master
    ECF Veteran
    Jul 3, 2014
    4,402
    5,789
    United States
    The "cotton" that was cultivated outside of the Americas in ancient times is not what you and I recognize as cotton. It is a tree that produces fibrous bulbs.
    Not exactly (I googled, of course). Cotton was widespread in the Old World well before Columbus. Cotton was grown not as now, not as annual, but as perennual, as shrub or even small trees. American cotton (I mean not grown in America, but genetically) now is just preferred type of cotton, but it is not something new for Old World.

    Cotton was a common fabric during the Middle Ages, and was hand-woven on a loom. Cotton manufacture was introduced to Europe during the Muslim conquest of the Iberian Peninsula and Sicily. The knowledge of cotton weaving was spread to northern Italy in the 12th century, when Sicily was conquered by the Normans, and consequently to the rest of Europe. The spinning wheel, introduced to Europe circa 1350, improved the speed of cotton spinning

    History of cotton - Wikipedia, the free encyclopedia
     
    • Like
    Reactions: nyiddle

    disley

    Senior Member
    ECF Veteran
    Nov 30, 2013
    227
    294
    Australia
    Never tried rayon. Personally I love the way cotton wicks for me and never felt the need to try anything else. What makes rayon better?
    When you try it you'll see or taste the difference.
    Like any wick material you have to experiment with it, even experienced builders get good and bad wicks.
    I used Japanese cotton for a long time with good results.
    When I started using titanium for coils I switched to rayon because it gave a cleaner taste and bigger clouds.
    There are a number of good threads on rayon have a look:
    Rayon wick, better flow, flavor, saturation and Nic Hit! | E-Cigarette Forum
     
    Status
    Not open for further replies.

    Users who are viewing this thread