- Status
I have limited supply of the 3.7 volt box mods, with more inventory not being offered for sale until this time next week, at the earliest.
An a little while, I will be listing for sale the stock I have left. Some of the parts I use are on back order. What I will list for sale is already built. I have quite a few additional 5 volt mods half built, the majority being the white ones, so the black 5v are also limited.
keep an eye out for my availability list in a few minutes.
Steve
An a little while, I will be listing for sale the stock I have left. Some of the parts I use are on back order. What I will list for sale is already built. I have quite a few additional 5 volt mods half built, the majority being the white ones, so the black 5v are also limited.
keep an eye out for my availability list in a few minutes.
Steve
OK folks, this is all the box mods I have available for shipping tomorrow:
(3) Black 5 volt box mods with LED color choice with master switch
(1) Black 5 volt box mod with ORANGE LED with master switch
(1) Black 3.7 volt box mod with RED LED with master switch
(2) Black 3.7 volt box mod with MAGENTA LED with master switch
(2) Black 3.7 volt box mod with LED color choice NO MASTER SWITCH ON THESE 2.
(1) White 3.7 volt box mod with MAGENTA LED mounted inside the box, for a glowing effect.
(1) White 3.7 volt box mod with BLUE LED mounted inside the box, for a glowing effect
I have a few more 5 volts I will be finishing up tonight, and will list those for sale either tonight, or tomorrow morning.
PM me or send me an email to the email address listed on the "contact us" tab at foxyboxmods.com - Home
Steve
(3) Black 5 volt box mods with LED color choice with master switch
(1) Black 5 volt box mod with ORANGE LED with master switch
(1) Black 3.7 volt box mod with RED LED with master switch
(2) Black 3.7 volt box mod with MAGENTA LED with master switch
(2) Black 3.7 volt box mod with LED color choice NO MASTER SWITCH ON THESE 2.
(1) White 3.7 volt box mod with MAGENTA LED mounted inside the box, for a glowing effect.
(1) White 3.7 volt box mod with BLUE LED mounted inside the box, for a glowing effect
I have a few more 5 volts I will be finishing up tonight, and will list those for sale either tonight, or tomorrow morning.
PM me or send me an email to the email address listed on the "contact us" tab at foxyboxmods.com - Home
Steve
I've given the 3.7v a name 
It's Luigi! Why? Because he's thinner than the 5v Beast, and he's like my sidekick. I take him whenever I go out. Good times.
It's Luigi! Why? Because he's thinner than the 5v Beast, and he's like my sidekick. I take him whenever I go out. Good times.
Just wanted to make a quick post to say that I just ordered a 3.7v mod (black w/ master switch & green LED) this morning and I'm totally stoked about it!
This will be my first mod (I've been vaping a regular old Joye 510 w/ manual batteries up to this point) and I can't wait to see how it vapes. I already ordered some Ultrafire 14500 batteries, a charger for them, and some Boge 2.0 ohm cartos for it so I think I've got everything I need to start vaping it once it arrives. I'm really excited to see how a mod with an LR carto vapes compared to the standard 3.2 ohm attys and cartos I've been using on my 510.
Anyhoo, I'll be sure to post up a little review of the 3.7v Foxy Box once it arrives. I must have spent days looking at different mods and reading review threads and after all that this little guy certainly looks like the most solidly built and reliable option for a budget friendly and pocket carry-able small mod to start out with. Big thanks to Godzilla too for the lightning fast customer service. It seems like it took him less than half an hour from the time I first contacted him about the order to send a payment request, receive the payment, get the green LED installed, and get the whole thing boxed up and shipped out. I think that's about the fastest I've ever had anyone I've dealt with online get something ready to go and ship out. Amazing customer service!
This will be my first mod (I've been vaping a regular old Joye 510 w/ manual batteries up to this point) and I can't wait to see how it vapes. I already ordered some Ultrafire 14500 batteries, a charger for them, and some Boge 2.0 ohm cartos for it so I think I've got everything I need to start vaping it once it arrives. I'm really excited to see how a mod with an LR carto vapes compared to the standard 3.2 ohm attys and cartos I've been using on my 510.
Anyhoo, I'll be sure to post up a little review of the 3.7v Foxy Box once it arrives. I must have spent days looking at different mods and reading review threads and after all that this little guy certainly looks like the most solidly built and reliable option for a budget friendly and pocket carry-able small mod to start out with. Big thanks to Godzilla too for the lightning fast customer service. It seems like it took him less than half an hour from the time I first contacted him about the order to send a payment request, receive the payment, get the green LED installed, and get the whole thing boxed up and shipped out. I think that's about the fastest I've ever had anyone I've dealt with online get something ready to go and ship out. Amazing customer service!
Your timing was really good. I was heading out to the post office when I saw your PM.
This is why I only like to offer up for sale what I already have built (less the LED) This way I wont get backed up with orders. My order processing is all manual, and I still physically drive down to the post office to mail them. That way I know that the tracking gets logged in each and every time.
Normally I ship within 24 hours, but depending on what day of the week it is, and how the kids are acting that morning, I can sometimes ship same day. I took vacation days M-F of this week, so I have had some extra time.
I am afraid when my current supply runs out, there will be some pent up demand when my new stock arrives in roughly a week, or 10 days, so those thinking of ordering what I listed a few posts back, may just want to jump on them.
I have some more 5 volt boxes half built, so plan on finishing those up tonight, and will add them to the inventory list tomorrow evening.
Thanks Jin. I really think you will be blow away at the difference between this set up, and the set up you have been using.
Cheers, and thanks for your business!
Steve
This is why I only like to offer up for sale what I already have built (less the LED) This way I wont get backed up with orders. My order processing is all manual, and I still physically drive down to the post office to mail them. That way I know that the tracking gets logged in each and every time.
Normally I ship within 24 hours, but depending on what day of the week it is, and how the kids are acting that morning, I can sometimes ship same day. I took vacation days M-F of this week, so I have had some extra time.
I am afraid when my current supply runs out, there will be some pent up demand when my new stock arrives in roughly a week, or 10 days, so those thinking of ordering what I listed a few posts back, may just want to jump on them.
I have some more 5 volt boxes half built, so plan on finishing those up tonight, and will add them to the inventory list tomorrow evening.
Thanks Jin. I really think you will be blow away at the difference between this set up, and the set up you have been using.
Cheers, and thanks for your business!
Steve
Just wanted to make a quick post to say that I just ordered a 3.7v mod (black w/ master switch & green LED) this morning and I'm totally stoked about it!
This will be my first mod (I've been vaping a regular old Joye 510 w/ manual batteries up to this point) and I can't wait to see how it vapes. I already ordered some Ultrafire 14500 batteries, a charger for them, and some Boge 2.0 ohm cartos for it so I think I've got everything I need to start vaping it once it arrives. I'm really excited to see how a mod with an LR carto vapes compared to the standard 3.2 ohm attys and cartos I've been using on my 510.
Anyhoo, I'll be sure to post up a little review of the 3.7v Foxy Box once it arrives. I must have spent days looking at different mods and reading review threads and after all that this little guy certainly looks like the most solidly built and reliable option for a budget friendly and pocket carry-able small mod to start out with. Big thanks to Godzilla too for the lightning fast customer service. It seems like it took him less than half an hour from the time I first contacted him about the order to send a payment request, receive the payment, get the green LED installed, and get the whole thing boxed up and shipped out. I think that's about the fastest I've ever had anyone I've dealt with online get something ready to go and ship out. Amazing customer service!
I ran into a problem today...
I accidentally grabbed my pocket electronic detonator today, instead of my 5v FoxModBox and blew my lips clean off.
I really got to pay more attention to details... 
I accidentally grabbed my pocket electronic detonator today, instead of my 5v FoxModBox and blew my lips clean off.
I really got to pay more attention to details...
Wait, so does that mean there's a bomb in your lips already that the detonator activates? Or does the detonator itself have a bomb built in?
I wouldnt want to be stopped by the police with that thing in full view. Grant it, wouldnt want them seeing one of mine either.
That thing is cool looking. Way to go! Sorry you are lipless now
That thing is cool looking. Way to go! Sorry you are lipless now
I had a short PETN cord on the end, that I thought was the carto.
Next week I am going to build a 3.7v box mod that holds (1) 18650 2400mah battery. This box mod will last nearly 3 times as long as my standard 3.7. It will also have a master switch, and have the option for an LED as well. I will not pre-sell this box mod. It would go against my promise of 24 hour shipping. Plus, I want to make sure it works well, and turns out nice. I ordered 2 of the boxes just in case I need one for practice.
I will sell it first come first served once it is finished later next week. You will need to supply your own 18650 battery and charger possibly (I actually have one multi charger that has been used only a couple of times, and ordered two 18650 batteries. One of the batteries is going to be for my frend that has the wood lathe so he can build a tube style mod to fit the battery in it. Let me see if I can find a photo of his work on other projects.
Steve
I will sell it first come first served once it is finished later next week. You will need to supply your own 18650 battery and charger possibly (I actually have one multi charger that has been used only a couple of times, and ordered two 18650 batteries. One of the batteries is going to be for my frend that has the wood lathe so he can build a tube style mod to fit the battery in it. Let me see if I can find a photo of his work on other projects.
Steve
Here is a glimpse of my friends lathe work. The wood I want to use is manzanita. That is the wood that the handles of the rolling pin are made out of. The mod I want to create will hold a single 18650 battery 2400mah. Its going to be a few weeks, and these will be offered for sale without batteries and chargers, most likely, and I anticipate charging under $100 for it.
The manzanita handles only has a wax on it. It is a gorgeous wood.
[/IMG]
The manzanita handles only has a wax on it. It is a gorgeous wood.
I wish I had saved the thread, but there was a great one (complete with pictures) on testing voltage on a bunch of different e-cigs. Most were coming in about 3.4v and I think I remember the Riva being the closest to 3.7v. So it is nice to have a true 3.7v and as one that owns a Riva, I CAN tell a difference.
It took me a couple weeks to put the 5v down long enough to use the 3.7 much, but with the 1.5 ohm dual coils on the 3.7, I'm one happy camper! I'm sure glad I got both!
Hig
It took me a couple weeks to put the 5v down long enough to use the 3.7 much, but with the 1.5 ohm dual coils on the 3.7, I'm one happy camper! I'm sure glad I got both!
Hig
Hey Hig, if you ever want to bring that float tube of yours up to Nor Cal, I have one, along with a 3 wt and a 5 wt rod. With some planning, we could hit Lake Davis, or Maybe bank fish the walker river out of Markleyville. Last time I drove to Markleyville to hit the hot springs, I saw a guy with a real rod bender, and about died.
I tie my own flies when I am in the mood, and have a lifetime collection of materials. I can match almost any hatch. I even started tying streamers. Where is that photo taken?
I tie my own flies when I am in the mood, and have a lifetime collection of materials. I can match almost any hatch. I even started tying streamers. Where is that photo taken?
I tie my own flies too...
The crappiest ones always seem to catch the most fish. LOL
The crappiest ones always seem to catch the most fish. LOL
I used to fly fish the Klamath. My grandfather had a cabin near Dillon Creek and Blue Nose bridge, but that was many years ago. That picture is my son holding a large mouth from the San Diego river. Fun to catch and release.
Hig
Hig
We have a cabin in northern WI on a lake, this is the first year I will not be going up there
- Status
Similar threads
- Locked
- Locked