Question about coils

[martsumoto]

Simple questions for some of you

Which gauge of wire and diameter (using the coil master) should I use to obtain 1.2 / 1.5 ohm coils more efficiently? Single coil

 

[tj99959]

Easily done with either 30 or 28ga wire.

 

[Asbestos4004]

.28ga, 8 wraps 2.5 mm

 

[Susan~S]

Here are a link for you regarding building coils and getting the resistance just where you want it.

Steam Engine

 

[edyle]

Simple questions for some of you

Which gauge of wire and diameter (using the coil master) should I use to obtain 1.2 / 1.5 ohm coils more efficiently? Single coil

Coil wrapping | Steam Engine | free vaping calculators
28 gauge
2.5mm
1.4ohm
16 watts@4.7volts

 

[martsumoto]

Thank you all!
I'm into single coils only and I would like to find out the batteries I really need for my 60w and 150w mods.
I like my coils around .5 / .7 but also going above to 1.2 to 1.5.

 

[ElConquistador]

After messing with 32, 30, and 28 gauge wires, I finally settled on 29 gauge! Easy to work with, not too thick, not too thin....juuuuusssst right (for me). I build coils from .9 ohms to 1.5 ohms.

 

[Boden]

If you want to use them at full power.

Assuming a 3.2V cutoff per cell

Assuming dual battery in series
150W/6.4V = 23.4A
Sony VTC4 or equivalent

Assuming single cell
60W/3.2V = 18.75A
Samsung 25R or LG HG2