Question for 100% VG vapers
- Thread starter erbine
- Start date
- th_trl_thread_readers 0
- Status
Erbine if you have issues with the thick stuff vaping, try diluting with bit of distilled water. I use the ego tank system and have issues with the wick pulling it in if it is thick. Some vendors actually sell it at a nice consistency, others are too thick.
Could also consider a clearomizer - I have not tried yet but have read and seen a youtube juice review with no issue with thick VG at all. Plus they look fun
Could also consider a clearomizer - I have not tried yet but have read and seen a youtube juice review with no issue with thick VG at all. Plus they look fun
My VV Ali and Reo bottom feeders work very well all the time.
Map tanks are good too but more maintenance.
Map tanks are good too but more maintenance.
Yeah, I second bigtimeweb's distilled water suggestion. If you use that, you have control over the thickest of VG's and you can use anything then.
I just drip on a lr 901. I can't be bothered adjusting the juice viscosity to use some equipment.
I drip only (when possible) so 100% VG is not an issue for me and is what I use on any of my 510 or 801 devices.
For times I cannot drip, I use Boge 510 cartomizers (I use standard ohm because I have variable voltage or higher voltage devices and have never found a reason to attempt LR on them). But my usage of cartomizers is minimal because of my dripping preference. Most times I will DIY with glycerine that has been cut with 10-15% distilled water for use in carto's, but ..... I drip with 100% glycerin that gets cut only buy the flavourings and/or my pg nic base.
I've tried different types of set ups of the CE2 tanks, but I don't like the hassle or the taste of CE2's with my high VG.
It's what works for ME, and I'm sure you will find through experimenting what will work for you.
VapeOn,
Greg
For times I cannot drip, I use Boge 510 cartomizers (I use standard ohm because I have variable voltage or higher voltage devices and have never found a reason to attempt LR on them). But my usage of cartomizers is minimal because of my dripping preference. Most times I will DIY with glycerine that has been cut with 10-15% distilled water for use in carto's, but ..... I drip with 100% glycerin that gets cut only buy the flavourings and/or my pg nic base.
I've tried different types of set ups of the CE2 tanks, but I don't like the hassle or the taste of CE2's with my high VG.
It's what works for ME, and I'm sure you will find through experimenting what will work for you.
VapeOn,
Greg
Thanks for the responses. Would diluting also diminish the flavor?
I've looked at the MAP, but it seems like just as much maintenance as the tank. Might have to try it though.
I like the bottom feeder idea, but I think the atty gumming up would still be a problem.
I've had better luck than most with the tank. It just gets gummed up quickly and then tastes like caca until I clean it.
I've looked at the MAP, but it seems like just as much maintenance as the tank. Might have to try it though.
I like the bottom feeder idea, but I think the atty gumming up would still be a problem.
I've had better luck than most with the tank. It just gets gummed up quickly and then tastes like caca until I clean it.
I agree with most of the above,
Bottom feeder would of course be ideal (reo, ali'i, old goat mods)
I don't have one of those and normally just drip if I am going out and about I use a boge cartomizer that I fill with a syringe (its much much faster with thick juices and seems to ensure full dispersion of the liquid) I use the LR versions as I vape at 3.7 and they work well. The above is my favorite combo after trying clearomizers, tanks, and a variety of cartomizers.
Bottom feeder would of course be ideal (reo, ali'i, old goat mods)
I don't have one of those and normally just drip if I am going out and about I use a boge cartomizer that I fill with a syringe (its much much faster with thick juices and seems to ensure full dispersion of the liquid) I use the LR versions as I vape at 3.7 and they work well. The above is my favorite combo after trying clearomizers, tanks, and a variety of cartomizers.
I am enjoying my VG in both the clearomizer and the "storm tank" style syringe/CE2 (2.8ohm) mod the most. I also found I prefer them on my 510 batteries over the larger batteries simply because I think it has a little less power going to the coil, keeping the vape a bit cooler. I think the VG starts to taste nasty if it gets too hot (personally) and I found I get drier hits with the clearomizers on the ego battery over the 510, so I am guessing it has to do with the smaller battery in the 510 not heating the coil as hot as the ego battery. I like the clearomizers simply because I can see what my juice is doing and I can clean them well, and dry burn to get a nice vape each time I go to refill.
well yes but you only need about 10% to get it moving. I use the eGo tank and would just drop a couple drops of water on top when I was filling and shake. I just had another thought and that is that you can dunk your juice bottle under hot water to loosen it up first
Do you have a setup yet or are you just asking to help you decide?
I've been having good luck with the tank, but it needs cleaning pretty regularly.
I was just asking to see what others have found.
I'll probably try a bottom feeder at some point.
I was just asking to see what others have found.
I'll probably try a bottom feeder at some point.
- Status
Similar threads
