Question for Qorax

Status
Not open for further replies.

EyesoreJr

Super Member
ECF Veteran
Feb 7, 2015
342
270
Steeler Country
Hey Qorax I see you have the GP Heron and I read your post about the Erlkonigin. If you had to have one, which would it be? I currently have a kayfun V4 clone and want something smaller. I use cotton wick and about 7-8 wraps around 2mm with 28g kanthal. If you could post a pic of the 2 side by side for comparison that would be awesome. Thanks in advance for any help.
 

tiburonfirst

They call me 'Tibs"
ECF Veteran
Verified Member
Feb 23, 2010
26,883
260,345
Hey Qorax I see you have the GP Heron and I read your post about the Erlkonigin. If you had to have one, which would it be? I currently have a kayfun V4 clone and want something smaller. I use cotton wick and about 7-8 wraps around 2mm with 28g kanthal. If you could post a pic of the 2 side by side for comparison that would be awesome. Thanks in advance for any help.

morning, eyesore ;) this forum is mighty big and it'll take a good amount of luck for mr q to see your thread here. why not play it safe and post your question in a thread you know he checks frequently?
i'm sure he'd hate to have overlooked this -
 

roxynoodle

Unregistered Supplier
ECF Veteran
Jun 19, 2014
15,344
37,213
Ohio
You have 17 posts :). He frequents the Erlkonigin thread in the RTA area. Also the High End Regulated mod thread, though this isn't a question about mods.

I once asked him what his favorite atty was, and he told me he loved all of them :laugh:

I have an Erlk and a Spheroid. Both are excellent for flavor. A Heron is basically a big Spheroid.
 

qorax

ECF Guru
ECF Veteran
Verified Member
Mar 6, 2013
12,652
41,477
Brampton, Canada
www.facebook.com
Hey Qorax I see you have the GP Heron and I read your post about the Erlkonigin. If you had to have one, which would it be? I currently have a Kayfun V4 clone and want something smaller. I use cotton wick and about 7-8 wraps around 2mm with 28g kanthal. If you could post a pic of the 2 side by side for comparison that would be awesome. Thanks in advance for any help.

Hi ESJ,

I've pretty much used all the attys [nearly] in the globe including the Heron (before it's launch). Below is my build thread of the Heron and my review of the Erlkonigin:

http://www.e-cigarette-forum.com/forum/vapourart/530491-gp-heron-setup-pictorial.html

http://www.e-cigarette-forum.com/forum/rta/573083-erlkoenigin-pictorial.html

GP Heron is a nice atty, an "auto-drip" one at that, akin to it's older and sleeker sibling - the GP Spheroid. Both rock solid toppers giving out some superb flavor - tho a bit tighter on the draw. Size wise Heron is nearly the same dimension as a KFL - 22mm OD, 50mm length. And the draw is opener than a KFL+ but less than a K4.

It's nice to have the Heron in your collection. But unfortunately since Erlkonigin happened I've relegated my main attention to this smooth Austrian wonder (the Erlkonigin) and most of my other attys are sitting idle or been disposed off (have sold off my Heron too, which is why I can't post a sbs pic of both). Imho, if it has to be 'one' I'd always pick the Erlkonigin. Why? Here's few pointers which drives me towards it:

1. Amazing VTF, especially top range flavor
2. Highest juice capacity (6ml standard / 3.5ml Nano)
3. See thru tank
4. As open a draw as a quality RDA
5. Sleeker (21mm OD, the way I like it nowadays)
6. Easy top fill
7. Easy to wick (there's a learning curve - but once you get it, it becomes second nature)
8. Vape till the last drop
9. Easy maintenance and replacement of parts, if a need so arises (I've yet to replace any tho)
10. Sexy driptips by Old Sam

I usually carry 16mm mods while out-n-about, but when I do carry a larger device - the Erlkobigin/s are the only ones I take along. I find them more reliable, dependable and offering a better vape experience. But that's me - ymmv.

All the best buddy!

Ps.: Thanks Tibs for directing me to this thread.
 
Last edited:

EyesoreJr

Super Member
ECF Veteran
Feb 7, 2015
342
270
Steeler Country
Thanks for the reply Qorax! I didn't know the nano held 5ml! I thought it only held 3! I just have 2 more questions for you if you don't mind.
1: Do they make a SS nano tank for the Erl?
2: I actually like the base of the Prinz better than the Erl so do you think it would work to purchase a Prinz and then buy this,
https://www.vapingwalrus.com/erlkonigin-clone
So I can use the nano chimney and the quarter turn top on it?
 

qorax

ECF Guru
ECF Veteran
Verified Member
Mar 6, 2013
12,652
41,477
Brampton, Canada
www.facebook.com
Thanks for the reply Qorax! I didn't know the nano held 5ml! I thought it only held 3! I just have 2 more questions for you if you don't mind.
1: Do they make a SS nano tank for the Erl?
2: I actually like the base of the Prinz better than the Erl so do you think it would work to purchase a Prinz and then buy this,
https://www.vapingwalrus.com/erlkonigin-clone
So I can use the nano chimney and the quarter turn top on it?

The Erlk Nano holds 3.5ml (did I do a typo there, lemme check).

1. Yes, there's a metal tank for the Erlk.
2. As log as it's not a must I'd avoid a clone / counterfeit, whether a full gear or a part.
 

EyesoreJr

Super Member
ECF Veteran
Feb 7, 2015
342
270
Steeler Country
If you need help with either, let me know, even though I'm from Cleveland :laugh: Go Browns :facepalm:
Aww thanks Roxy. Just to let you know, I'm not typical. I have a soft spot for the Brownies. One of my dearest friends was from Cleve and when you poor people lost your team, (DAMN RAVENS!!! I really felt bad for you. As long as the Browns are not playing us or threatening our spot in the division, I root for them!
 
Status
Not open for further replies.

Users who are viewing this thread