Question

[imeothanasis]

Guys, does anyone knows if some mods have a 510 connector deeper than the upper surface of their connector cap? If yes, what is the mod with the smallest diameter of the hole that has the connector inside it?

For example, I know that bottom feeders like Reo have a connector like this but I dont know the diameter of its hole.

The reason that I am asking is because I am designing an Achilles-all atomizers tank.

 

[markfm]

The catch cup on the REO VV Grand is 3/16" (4.82 mm) deep. The catch cup on the REO Grand is 11/64" (4.21 mm) deep.

The diameter of the catch cups on REOS can be found at the first post here: http://www.e-cigarette-forum.com/forum/reos-mods/161169-reo-measurements-parts-terminology.html It ranges from 33/64" (13.09 mm) on the smallest Mini to 19/32" (15.08 mm) on the larger models.

 

[imeothanasis]

Thank you very much for the info mark, I really apreciate it!

Is there any other bottom feeder that has a connector deeper than the upper level of its connector? And what is the diameter of its catch hole?

 

[markfm]

Redskymods, Capt' Brian runs it, also has catch cups. I don't have dimensions, hopefully Capt' Brian will contact you.

 

[imeothanasis]

i hope so mark

 

[LongHaul]

the Groove and the smooth have a catch cup but not sure of the sizes i do remember its not as deep as the Grand

 

[Capt' Brian]

Ahoy! Heard you were looking for some info. Hope you don't mind me posting this here.

The catch cups I use are .6" ID and .25" deep. I believe a couple other makers also use the same sized CC's as I do.

Good luck! Arrr

 

[imeothanasis]

Nice to see you Brian and thank you very much for the info! As I see the catch cups are maybe not smaller than 13mm on bottom feeders. Thats very good because Achiles has to fit on all bottom feeders

I wish you the best to your business, be well buddy

 

[ChrisEU]

The smallest catch cup on a bottom feeder should be on the REO Mini, which has a diameter of 12,5mm to 13mm. The Surface RBA is built specifically for the Mini and has a diameter of 12,3mm to allow for air flow.
If you want to build something that fits on a REO mini, stay below or at 12,3mm diameter.

 

[ChrisEU]

Here is the 12,3 mm Surface on a REO Mini to help you judge the space left:

 

[imeothanasis]

I am at 11,5 right now, so I think that I will be ok with all the bottom feeders Chris, thanks a lot buddy

The smallest catch cup on a bottom feeder should be on the REO Mini, which has a diameter of 12,5mm to 13mm. The Surface RBA is built specifically for the Mini and has a diameter of 12,3mm to allow for air flow.
If you want to build something that fits on a REO mini, stay below or at 12,3mm diameter.

 

[imeothanasis]

great chris, thanks again!

Here is the 12,3 mm Surface on a REO Mini to help you judge the space left:
View attachment 176669

 

[dspin]

Hope its made to fit UFS V1 with your mouthpiece. The SS GG mouthpiece makes all the difference in the world when using UFS w/air control for every atty

 

[imeothanasis]

Achilles will have its own mouthpiece buddy

 

[Aal_]

Achilles will have its own mouthpiece buddy

Does this mean we cannot use the UFS mouthpiece?

 

[imeothanasis]

on the first run, yes aal

 

[dspin]

Does this mean we cannot use the UFS mouthpiece?

Horrors, I hope so. Imeos mouthpiece RULES