quick vision question

Status
Not open for further replies.

vapspaz

Vaping Master
ECF Veteran
Verified Member
Oct 21, 2010
4,218
8,873
SC
Ummmm.... Vapor is Vapor. What doesn't go into your lungs has to collect some place. It's sorta like the saying chit happens but in the case it's condensation happens. The advantage of the tips on these Visions is that it traps it in there rather than puking it in your mouth.

You can minimize this build up by continuing to draw a second after you release the power button.
 

robl45

Super Member
ECF Veteran
Verified Member
Jan 2, 2010
965
95
florida
the problem is everyone keeps saying this, but this didn't happen with the CE2's before the deluxe ones, maybe I should buy a truckload of them and just throw them out when they get dirty as the biggest problem was not being able to clean them.

at any rate, it collects in the tip and then gets sucked into my mouth eventually. and I made sure I cleaned the tip and the tube so no juice was in it this morning. but at any rate, if the juice collects in the tip, and there is a hole at the top of the tip, its going to get sucked up.


Ummmm.... Vapor is Vapor. What doesn't go into your lungs has to collect some place. It's sorta like the saying chit happens but in the case it's condensation happens. The advantage of the tips on these Visions is that it traps it in there rather than puking it in your mouth.

You can minimize this build up by continuing to draw a second after you release the power button.
 

harmonic

Vaping Master
ECF Veteran
Verified Member
Mar 20, 2011
5,157
11,413
50
Desoto, Mo
i get some buildup in the mp too. i gave up pull the mp and just blow the daylights out of it when i notice. sometimes i even take the dividers out and use some paper towel to get the rest out. i find this effect is minimized if i leave pv standing up all the time. juice still collects in the bottom though because the little nipple from the cup sticks up inside the mp just a hair so the inside of the mouthpiece seal acts like a bowl untill i pull it out and the juice can drain back out out. still its only a couple drops at most so i dont worry about it. i only get the juice in the mouth if there is a lot in there and i dont notice and bottoms up to hit it and get a little...
it can be a pita but this thing works good enough that its not much of an issue for me lol
 

vapspaz

Vaping Master
ECF Veteran
Verified Member
Oct 21, 2010
4,218
8,873
SC
idk man... I can flood the hell out of these Vision Mini's and then just suck the juice right up out of the cup with 3-4 quick/hard hits and still don't get any juice in my mouth. And that's without the tip seal and top cover thing. I don't have any reg's to try yet so maybe thats the difference.

Maybe you just need to find your perfect juice. I like mine so well that sometimes I skip the whole PV/carto thing and drink the stuff. :lol:
 

Amy41996

Ultra Member
ECF Veteran
Dec 21, 2010
2,004
1,456
Chicago, Illinois, United States
ya know i have often wondered why they just dont put the nic in a beverage - then you could drink your habit away...
but then that might open a whole other can of worms lol ...
or give you a drinkin problem haha

yup ,,,yup..nic in beverage...AWSOME..we can clear the worms away if they should appear :blink:
yup,,,this is what I will vote for...24mg on ecig...24mg in my coffee with the added pleasure of caffine....ooo yeah....i am for that :) WOOT
Lets do it...
 

robl45

Super Member
ECF Veteran
Verified Member
Jan 2, 2010
965
95
florida
my liquid is at the very top of the mouthpiece, I'll have to try to figure out how to get it out. i don't think you can just pop the top piece off with the mouth hole, looks glued in there.

I just don't know what to do with these things, the one I have works well when its working, but I have to fill it 3/4's or less to avoid it blowing the liquid all over the place when I put the mouth piece on, i tried flipping it over as suggested when i pushed the mouthpiece on, all the liquid went into the mouthpiece this morning, thats probably why its stuck in the top now. at any rate, every now and then I notice I go to take a puff and its obviously there is liquid stuck somwehre, i'm guessing in the rubber tube. I really like this thing, just wish it wasn't an adventure to fill and vape every time.

i get some buildup in the mp too. i gave up pull the mp and just blow the daylights out of it when i notice. sometimes i even take the dividers out and use some paper towel to get the rest out. i find this effect is minimized if i leave pv standing up all the time. juice still collects in the bottom though because the little nipple from the cup sticks up inside the mp just a hair so the inside of the mouthpiece seal acts like a bowl untill i pull it out and the juice can drain back out out. still its only a couple drops at most so i dont worry about it. i only get the juice in the mouth if there is a lot in there and i dont notice and bottoms up to hit it and get a little...
it can be a pita but this thing works good enough that its not much of an issue for me lol
 

Modrod.

Vaping Master
ECF Veteran
Sep 30, 2010
8,061
33,357
50
AZ, USA
idk man... I can flood the hell out of these Vision Mini's and then just suck the juice right up out of the cup with 3-4 quick/hard hits and still don't get any juice in my mouth. And that's without the tip seal and top cover thing. I don't have any reg's to try yet so maybe thats the difference.

Maybe you just need to find your perfect juice. I like mine so well that sometimes I skip the whole PV/carto thing and drink the stuff. :lol:
I do the same thing on the 3.5ml. No liquid in the mouth at all. I use a 50/50 blend.
 

Briar

Ultra Member
ECF Veteran
Jul 28, 2009
2,350
2,558
64
A fool on the hill in Deposit, NY
Re. condensation buildup folks were asking about on the last page: take the tip by the tip (lol) put a paper towel lightly across the hole that normally faces down into the carto, and shake the heck out of it, like a thermometer. Works every time. I think bad suggested it awhile ago...

Joining the stalking procession. :)
 

Amy41996

Ultra Member
ECF Veteran
Dec 21, 2010
2,004
1,456
Chicago, Illinois, United States
Re. condensation buildup folks were asking about on the last page: take the tip by the tip (lol) put a paper towel lightly across the hole that normally faces down into the carto, and shake the heck out of it, like a thermometer. Works every time. I think bad suggested it awhile ago...

Joining the stalking procession. :)

cool!!!!! lets stalk :) woot!!!!!!!!!!! BUT, i get the amy stalking backpack when it gets fixed :)
 

Briar

Ultra Member
ECF Veteran
Jul 28, 2009
2,350
2,558
64
A fool on the hill in Deposit, NY
i could see the 3.5 ml having much less of a problem as its much bigger and you probably don't fill it right to the top of the seal.

You know, bad said several times not to fill these things right up to the seal. That's probably the problem right there. I never had any issues with this, but I only fill to the bottom of the cup - I think that's how you are supposed to do it.
 
Status
Not open for further replies.

Users who are viewing this thread