RDA Round-Table Discussion and Lookout
- Thread starter Mr.Mann
- Start date
- th_trl_thread_readers 0
- Status
What is this phone you speak of? Jk, I'll give that a try. Thanks.
Dang! Ouch! Sorry I posted about them. Contact your card carrier and tell them you never received your product--you should be covered.
For sure! I can assure you all that my post was not a referral link though (and I may as well break it just so there is no thought about it).
I called them, they opened a ticket, so hopefully it gets resolved. I haven't had a problem with them in the past, so I dunno, just a fluke probably.
Anybody know who has the Origen V2 Genesis MKII (4ml) currently in stock in the US?
Urban Vapors? Out of Eugene, OR, never used them, but their site shows in stock.
http://urbanvaporsonline.com/index.php/shop#!/Origen-Genesis-V2-MKII-4ml-Tank/p/52493704
Calling them, and opening a ticket definitely did the trick, they are re-sending out what I ordered after the holiday (Columbus day). So I spoke too soon, or didn't try hard enough, either way, looks like they are taking care of it. No longer throwing them under the bus, giving them a pat on the back.
I never once thought your link was a referral. I certainly wasn't directing my comments at you my friend.
I know (figured), but it's just one of those things that I wanted to make sure others 'got'. But I totally appreciate the reply, @inswva!
And speaking of appreciation, I am thrilled to see some new life pumped back in here. With the recent price reduction in several atties and the new releases of a few really interesting looking atties, I am stoked that the conversation will continue!
NarDA ordered as well as a Hellfire Raptor that comes with a BF pin. Those two and the Manta V2 en route to me should do me for awhile.
I can't seem to find anything on the NarDA. But, I can't seem to find a lot of stuff these days...
Thanks!
Anyone have any info on this atty? INSIV posted it to their FB page:
- split positive post
- negative post milled into the deck
- large slotted coil terminals for wide and thick coils
- angled bottoms on coil slots to center coils and accommodate single strand and smaller coils
- adjustable/tightenable positive post
- peek insulators
-deep juice well
- partitioned airflow below the coils (adjustable)
- airflow behind the coils through the negative post (adjustable)
- upper cyclonic airflow; four slots, counter clockwise rotation (adjustable)
- barrel/main sleeve locks down into place via slotted mechanical lock
- removable topcap with a removable top cap adapter for ever easier dripping access
- proprietary drip tip system with a percolated, in-line feed
Looks interesting.
- split positive post
- negative post milled into the deck
- large slotted coil terminals for wide and thick coils
- angled bottoms on coil slots to center coils and accommodate single strand and smaller coils
- adjustable/tightenable positive post
- peek insulators
-deep juice well
- partitioned airflow below the coils (adjustable)
- airflow behind the coils through the negative post (adjustable)
- upper cyclonic airflow; four slots, counter clockwise rotation (adjustable)
- barrel/main sleeve locks down into place via slotted mechanical lock
- removable topcap with a removable top cap adapter for ever easier dripping access
- proprietary drip tip system with a percolated, in-line feed
Looks interesting.
I saw this too! Definitely interested to see what the inside looks like.Anyone have any info on this atty? INSIV posted it to their FB page:
- split positive post
- negative post milled into the deck
- large slotted coil terminals for wide and thick coils
- angled bottoms on coil slots to center coils and accommodate single strand and smaller coils
- adjustable/tightenable positive post
- peek insulators
-deep juice well
- partitioned airflow below the coils (adjustable)
- airflow behind the coils through the negative post (adjustable)
- upper cyclonic airflow; four slots, counter clockwise rotation (adjustable)
- barrel/main sleeve locks down into place via slotted mechanical lock
- removable topcap with a removable top cap adapter for ever easier dripping access
- proprietary drip tip system with a percolated, in-line feed
Looks interesting.
Sent from my VS986 using Tapatalk
Found this in google images...I believe this is the NarDA
I don't know much at all about these RDAs except what I can see here. It looks like a bit of a nod to the Veritas with its anti-leak channels. Deep well! Definitely cool from what I can see here.
I don't know much at all about these RDAs except what I can see here. It looks like a bit of a nod to the Veritas with its anti-leak channels. Deep well! Definitely cool from what I can see here.
Last edited:
The aeronaut just got a lot more interesting. Those airflow tubes are removable so you can have only top or bottom airflow.
- Status
Similar threads
