RDA Round-Table Discussion and Lookout

[nosmoke12]

Man, when is the small atty trend going to reverse and start making attys' with nice big juice wells again? Still love the juice capacity of my Holmes V1's I do like small(ish) atty's but I also like being able to take more than a few pulls before re-dripping but I'm also weird and usually take off the whole top cap for dripping.

 

[jhhollier]

I never tried a Holmes V1 but I have a V2 and while it had very nice flavor mine leaked through the 510 and has been back in its box since. I read that others had a similar problem. Hopefully if Cigreen comes out with a V3 this won't be an issue.

 

[nosmoke12]

Yeah I heard some people had issues with that. My first one had the posts turned wonky and uneven but I went thru originvape and they got me setup with a replacement. I didn't get the v2 because of what you mentioned and some people said it went from 4 open airholes to 2 so I skipped it. I know they are actually in the process of making the v3, just not sure when it will come out, they posted up on reddit what they had so far like a month or so ago and got suggestions from people, so hopefully it will launch sometime soon!

 

[jwbnyc]

Talk about small! My god. I would love to own this but for the price no thanks, it's more expensive then the original. This is the vertex Jr. It holds 4 drops of juice.....I kid lol but really.

Sent from my VS986 using Tapatalk

The dripping atty re-invented.

 

[HeiSINberg]

The Thump atty. Can't wait to see the insides of this, I like that the air holes aren't right near the juice well for a change. Definitely keeping an eye on this.

Sent from my VS986 using Tapatalk

 

[jhhollier]

Apparently the Thump is a collaboration with Praxis. At least that's what Praxis posted on their Instagram. It's on the radar but I still want to know what the Derringer V2 will be like.

 

[HeiSINberg]

Apparently the Thump is a collaboration with Praxis. At least that's what Praxis posted on their Instagram. It's on the radar but I still want to know what the Derringer V2 will be like.

That's how I saw it actually lol. At first I thought it was the derringer v2. Depends the price point, and the insides, I do like the looks though.

Sent from my VS986 using Tapatalk

 

[jhhollier]

At one point in the video you can see in through the top cap and it looks to me like it's got a split center post which is fine by me though I'd prefer two post. As long as it isn't three post I'm good.

 

[HeiSINberg]

At one point in the video you can see in through the top cap and it looks to me like it's got a split center post which is fine by me though I'd prefer two post. As long as it isn't three post I'm good.

Really? I didn't even notice that. Yeah I'm good with the split post, but like you id rather it be a dual post too. That's what I was hoping it was.

Sent from my VS986 using Tapatalk

 

[jhhollier]

It's only a split second so I could be wrong but it looked like the top of split center post.

 

[67Tele]

Man, when is the small atty trend going to reverse and start making attys' with nice big juice wells again? Still love the juice capacity of my Holmes V1's I do like small(ish) atty's but I also like being able to take more than a few pulls before re-dripping but I'm also weird and usually take off the whole top cap for dripping.

I'd gotten a Bambino from HeiSINberg. It was a nice atty but, it was too small for me. It went to a good home so, all's well.
Like you, I take the cap off as well as liking more capacity. Marquis, Vector, Royal Hunter give great flavor, air and longer time between drippings. I still love the Magma for flavor and ease of build but have been using it less due to having to unscrew the top.

I got a Manta in yesterday and ordered a Gota (I confess, I'm weak...but, it came with good recommendation and was $50 off) so, we'll see.

 

[muzichead]

Talk about small! My god. I would love to own this but for the price no thanks, it's more expensive then the original. This is the vertex Jr. It holds 4 drops of juice.....I kid lol but really.

Sent from my VS986 using Tapatalk

Great little atty. I was in on a group buy on FB for mine. Been using it for a couple months now. I drilled out the +screw and have been using it on one of my Peko's and a Reo Grand... It will leak though if oversquonked... Flavor and vapor is right up there.

 

[HeiSINberg]

Great little atty. I was in on a group buy on FB for mine. Been using it for a couple months now. I drilled out the +screw and have been using it on one of my Peko's and a Reo Grand... It will leak though if oversquonked... Flavor and vapor is right up there.

I messed up my first post I thought you were talking about the other pic I posted sorry lol. How's the flavor on it though?

 

[HeiSINberg]

It's only a split second so I could be wrong but it looked like the top of split center post.

Your right, I just watched the video again and it definitely looks like a positive block. In good with that, I'm not good with 3 posts though, I have enough of them but the 4 holes I can work with I actually like them. Thanks for pointing that out.

Sent from my VS986 using Tapatalk

 

[HeiSINberg]

Anyone have any experience with the stro atty from sacred mods?

I have the stro mini, I'm not super liking it to be honest. Can't really say why but it's really nothing special. For the price it's great, especially if you wanna see what having a 2 post dripper is like, that was the reason I bought it. It was the cheapest 2 post dripper I could find so I went for it. It was a little sloppy when I first got it which was expected honestly, the one screw hole came Damn near stripped out of the box, and I think the top cap is a little ridiculous but my kupcake cap fit it so I use that. Not much spit back, and flavor is like anything else, and I only wish it had a single coil option that's really my biggest complaint but I knew that going into it.

Sent from my VS986 using Tapatalk

 

[Oobydooby]

I have the stro mini, I'm not super liking it to be honest. Can't really say why but it's really nothing special. For the price it's great, especially if you wanna see what having a 2 post dripper is like, that was the reason I bought it. It was the cheapest 2 post dripper I could find so I went for it. It was a little sloppy when I first got it which was expected honestly, the one screw hole came Damn near stripped out of the box, and I think the top cap is a little ridiculous but my kupcake cap fit it so I use that. Not much spit back, and flavor is like anything else, and I only wish it had a single coil option that's really my biggest complaint but I knew that going into it.

Sent from my VS986 using Tapatalk

Dang I really want a 2 post design too... I heard a lot of good things about the velocity.... Was going to try the Legion until I saw how the airflow on the cap works(terribly) I'm not to big of a fan of how much the dotmod petri cost compared to the complaints of issues that high end of an atty comes with.. So maybe I will try the velocity.. Thanks for the feedback!

 

[HeiSINberg]

Dang I really want a 2 post design too... I heard a lot of good things about the velocity.... Was going to try the Legion until I saw how the airflow on the cap works(terribly) I'm not to big of a fan of how much the dotmod petri cost compared to the complaints of issues that high end of an atty comes with.. So maybe I will try the velocity.. Thanks for the feedback!

No problem, and don't get me wrong, if I was on a vaping budget id probly get another one for the price and ease of build. Maybe I was too harsh for a 30$ atty, but I was only giving my honest opinion lol I don't wanna sound petty since the cost is so low. I only got it for the 2 post design, nothing else, it served it's purpose though cause now I want a higher end 2 post atty haha.

Sent from my VS986 using Tapatalk

 

[Oobydooby]

No problem, and don't get me wrong, if I was on a vaping budget id probly get another one for the price and ease of build. Maybe I was too harsh for a 30$ atty, but I was only giving my honest opinion lol I don't wanna sound petty since the cost is so low. I only got it for the 2 post design, nothing else, it served it's purpose though cause now I want a higher end 2 post atty haha.

Sent from my VS986 using Tapatalk

Haha I just want to test out a 2 post before I go deep into a more expensive authentic one.. The new hobo v3 I think? Is also a 2 post that looks interesting to try

 

[HeiSINberg]

Haha I just want to test out a 2 post before I go deep into a more expensive authentic one.. The new hobo v3 I think? Is also a 2 post that looks interesting to try

That's the exact one I want, thanks to the stro mini I'll be spending more money lol damn stro. So yeah I guess it wasn't all bad in the end.

Sent from my VS986 using Tapatalk

 

[Oobydooby]

That's the exact one I want, thanks to the stro mini I'll be spending more money lol damn stro. So yeah I guess it wasn't all bad in the end.

Sent from my VS986 using Tapatalk

If you decide to sell the stro I'd possibly be willing to take it off your hands haha what finish did you get?