RDA Round-Table Discussion and Lookout
- Thread starter Mr.Mann
- Start date
- th_trl_thread_readers 0
- Status
I traded a NarDA for it. I've only had it for about a week but I really like it quite a bit. It definitely won't be my only Sunbox. I'm after a delrin E8 now.
Here's a few shots of the TM²:
I never picked up the v1 because I hated the deep knurled styling of the top cap. Shame they didn't move away from it on the v2, but I guess it's his styling/trademark/recognition.
I never picked up the v1 because I hated the deep knurled styling of the top cap. Shame they didn't move away from it on the v2, but I guess it's his styling/trademark/recognition.
Very cool.The Kennedy 22 is meant to be a bottom fed rda in my opinion. Thanks to catfish atty mods for the modification.
Sent from my iPhone using Tapatalk
I couldn't do that, though, because I'd be worried about over squonking and the air holes/leaking.
So maybe it isn't made for it
Does anyone here know how to move a bottom feed pin down more? I have the svapiamo 3D printed evic vtc 75w version and all of my rdas screw down but they only screw down like 3 or 4 threads and stops. The pin does move but it's also turning the solder wire that's attached underneath and I don't wanna snap that part.
I'm at work so this is the best picture I have right now, unfortunately you can't see what I'm talking about but hopefully I explained it well enough for someone to help me.
Sent from my SM-G925V using Tapatalk
I'm at work so this is the best picture I have right now, unfortunately you can't see what I'm talking about but hopefully I explained it well enough for someone to help me.
Sent from my SM-G925V using Tapatalk
Does anyone here know how to move a bottom feed pin down more? I have the svapiamo 3D printed evic vtc 75w version and all of my rdas screw down but they only screw down like 3 or 4 threads and stops. The pin does move but it's also turning the solder wire that's attached underneath and I don't wanna snap that part.
I'm at work so this is the best picture I have right now, unfortunately you can't see what I'm talking about but hopefully I explained it well enough for someone to help me.
Sent from my SM-G925V using Tapatalk
It all depends on the mod and how the BF 510 is constructed. My wood Svapiamo SX350 squonker had a fixed 510, IIRC.
Mine both adjust by turning the pin without moving the solder part, I find I usually have to retighten the nut on the inside after. It may be that the nut is too tight causing the whole lot to spin, try turning that knurled nut part you can see in the pic counter-clockwise to loosen it first and then see if you can then adjust it.
I think you may be right. I didn't even think of that but I did read that others are the same way and I noticed I have the same nut underneath so I may give this a shot. Thank you. I hope it does move cause even with the catch cup in place the rda only goes down till the bottom of the rda and catch cup are aligned, it can't be like that somethings gotta be adjustable here.
Sent from my SM-G925V using Tapatalk
Thanks for the reply, somethings gotta be able to move cause it just doesn't look right with an rda in place. There's like a couple millimeters gap in between whatever rda I'm using and the catch cup. Of course you can't see it but you can tell since once the bottom of the rda and top of the catch cup meet it stops, it hardly even goes down into the cup itself.
Sent from my SM-G925V using Tapatalk
I emailed the company and they got back to me ASAP. They said it is adjustable and explained how to do it, the nut underneath has to be lowered. Thanks everyone for the quick help!
Sent from my SM-G925V using Tapatalk
Sent from my SM-G925V using Tapatalk
on a side note, you should get a transparent door for that box and re-wrap some batteries like this:
i re-wrapped 16 batteries last night similar but different pictures. print a picture, put it around the battery, use clear battery wrap, profit.
Omg I love it! I never thought to do that. I have a bunch of carbon fiber vinyl left over from my car I was gonna use it to cover the blue on the mod. But I like this idea better. I know there site sells different colors but I don't think they make a clear unfortunately.on a side note, you should get a transparent door for that box and re-wrap some batteries like this:
i re-wrapped 16 batteries last night similar but different pictures. print a picture, put it around the battery, use clear battery wrap, profit.
Sent from my SM-G925V using Tapatalk
Oh, I hear ya on that one. Even if you don't find a clear one, it's still cool to have custom batteries.
I did so many last night because I'm slowly replacing all me and my wife's old batteries with LG HG2's. Right now, she has two sets of 2 for her Asmodus Minikin, I have two sets of 3 for my RX200 as well as two sets of 2 for my istick tc100. That makes A LOT of brown batteries (14 lol) in one place that would be easily confused and married pairs could easily get split up.
@HeiSINberg
I've been looking at those since I saw you snagged one. I'm interested to hear your thoughts once you get it up and running.
Thanks!
I've been looking at those since I saw you snagged one. I'm interested to hear your thoughts once you get it up and running.
Thanks!
There nice for what they are, I'm pretty sure I paid more for it then it shoulda been but it's perfect, it looks brand new honestly. I tried to order from svapiamo a couple weeks ago before I bought this and it wouldn't let me check out, that's why I snagged this one.
Sent from my SM-G925V using Tapatalk
- Status
Similar threads
