The white one? That used to be mine, lol. They are super easy to build, hit hard, and are tough as nails. I've had four of them.
RDA Round-Table Discussion and Lookout
- Thread starter Mr.Mann
- Start date
- th_trl_thread_readers 0
- Status
The white one? That used to be mine, lol. They are super easy to build, hit hard, and are tough as nails. I've had four of them.
The Nipple has an accessory BF pin available. Vaper's Hobby shop should have more in stock in a couple of weeks.
The Nipple RDA
The BF pin is also on the VHS site.
And, of course, let's not forget about the M-atty.
[/QUOTE]There's a Nipple in the Classies but, I think Mr.Mann's got his eye on it.
Thanks buddy!
Yes, that's the one. Looks like a great price from retail cost. That Hello Kitty bike and rainbow unicorn helmet made any chance of getting that this month non-existant
Sure, here you go. Inside the mod you can see it without the cap installed and how tight it is on the tube, you can see the pinching effect. Then I took pics of how big the hole in the cap is compared to the tube itself and hence why I don't use it lol. Hopefully they came out clear enough.
Sent from my SM-G925V using Tapatalk
Sure, here you go. Inside the mod you can see it without the cap installed and how tight it is on the tube, you can see the pinching effect. Then I took pics of how big the hole in the cap is compared to the tube itself and hence why I don't use it lol. Hopefully they came out clear enough.
Sent from my SM-G925V using Tapatalk
The Italian soft bottles or even the 6ml bottle kits Rob sells would work just fine. Vapage bottles would also likely work.
As for the bottle you are using, does insert in the top of the bottle not snap out without removing the whole thing?
There is no insert, unless I'm misunderstanding what you mean. It's just the tube, top cap and bottle.
Sent from my SM-G925V using Tapatalk
I don't know that bottle - but it does look almost like there is a "disc" at the very top that could pop off - giving you a more typical open bottle top (you'd need the cap again)...
It does look like that, maybe I should of looked closer lol. But, even if I pop it off and use the top cap again the bottle won't work and it'll just fall off the tube, the hole in the cap is way way too big and there would be no suction.
Sent from my SM-G925V using Tapatalk
For the person asking about Squonk-ready RDAs, I think Catfish still has a few dozen Stumpys from the last run.
That Svapiamo squonker is very sweet. I've been putting off buying one because I am on too many lists, but my resolve is weakening. Bad angel: "But, they're so cheap..." Good: "But, think of the shipping! From Italy!" BA: "But, what a bargain for such a beautiful piece of work." BA, again: "And most of them are under $100!" BA: "And you could build your own!"
The good angel really needs to woodshed those debating skills...
That Svapiamo squonker is very sweet. I've been putting off buying one because I am on too many lists, but my resolve is weakening. Bad angel: "But, they're so cheap..." Good: "But, think of the shipping! From Italy!" BA: "But, what a bargain for such a beautiful piece of work." BA, again: "And most of them are under $100!" BA: "And you could build your own!"
The good angel really needs to woodshed those debating skills...
Nice setup. I came close to ordering one myself. I put in a deposit for an SEBox, instead. I think I'll have to snag a Mokooo when more are released. Dot-Mod still has a regulated in stock but it's magenta and I don't think I could rock the pink.Yep, which is why I had it delivered to my office. I mean, my wife works from home but I don't need her signing for a DHL package from Italy, lol.
And, the hype is real. I'm absolutely sure I need another O16 now. Tossed a quick 26ga 1.2ohm Kanthal coil between the posts and the flavor is unreal. Both air holes fully open is a damn near perfect restricted lung hit.
I think pink would suit you well! Plus there's plenty of pink rda's and tips so you could be all matchy matchy.
Sent from my SM-G925V using Tapatalk
I was looking at it mighty hard. There are different colored doors for sale so I was trying to decide if another door might work well with it. My initial plan was to get the Neon Green with the Dark Green door but I checked the site and it has been sold.I think pink would suit you well! Plus there's plenty of pink rda's and tips so you could be all matchy matchy.
Sent from my SM-G925V using Tapatalk
Did you want the mech one or the regulated one? Those regulated ones look awesome.
On another note I really wish and think more modders should make it an option to have a regular pin and a bottom fed pin. I've had plenty of rda's come to think of it that would of made great squonkers, but didn't have that option. I'd definitely like to see more in the future.
Sent from my SM-G925V using Tapatalk
where the bottle meets the tubing pops off. over time it will wear and not be as snug but a small o ring the Top screw on cap will prolong the bottles life. Eeiter way eventually the bottle will need to be replaced. they are wear items.
The Pekos come without the screw cap and work just fin and last for a while
pull it at an angle and it will pop right out.
The Pekos come without the screw cap and work just fin and last for a while
pull it at an angle and it will pop right out.
I agree and thankfully it seems like more attys are coming out that do have the BF and non-BF pins. Almost all of the Hellfire attys are released that way but they are usually super restricted draws and expensive as hell. The Predator, with shipping, is probably $200 so it has come off of my short list.
I'd prefer the regulated.
@HeiSINberg, I've got the same mod. The mod works great, the bottle not so much. I found when you juice up the tube before inserting back into the bottle, it makes things a little easier. But attaching the tube to the squonk pin is a real pain, always has been and the way the bottle is made, always will be, IMHO. I've had a few BF mods but I've not come across this bottle design till Svapiamo. It's truly a PITA. Within a couple of fills, I gave up and switched it out for a reo bottle. You will still have to pull the bottle to fill, but they are much easier to fill and reinstall. The Italian bottles are even better. Slips onto the squonk pin on the first attempt, every time.
Kinda doesnt make sense to me to pay that much for a mod and have such a carpy bottle. Make it easy on yourself and get a reo bottle, or even better one of the Italian ones. For a few bucks, they will make your BF experience go so much better.
Hope this helps.
The SEbox mods are pretty nice, especially the hybrids. I'd have no problem rocking the pink Mokooo... hell, look at the one I bought, lol. I think it would look killer with a black door.
The blue door might look nice as well. Hmmmm.
Yeah, the hybrid SEBox mods look amazing. Mine's just stabilized, though. I'm thinking of getting the Skull Box but apparently the block I picked will not allow for the squonking panel to be made from it. Trying to work out the details with the modder.
- Status
Similar threads
