RDA Round-Table Discussion and Lookout

[inswva]

I'm not sure I can contribute anything else on the Origen V3. /shrug

It produced great flavor for me with the dual build I posted above and great flavor with this single Ni200 TC build.

 

[muzichead]

Just a thought on the Origen V3 convo, (same could be said for most 22mm atty's though), I think what the atty sets on is just as important information as what build everyone has in it.

I've noticed on most 22mm atty's that people say they get great flavor with it is sitting on top of a 60-100w+ box mod. This is going to make a difference over a standard mechanical device any day of the week. Part of the reason I have sidelined all my 22mm atty's is because I just don't feel comfortable running them @.2Ω just to get the performance out of them on my mechanicals...

I know personal preference plays big into this as well, but to me, coil placement and wicking are the highly important parts of the build that most don't mention. Every atty I have built since I started building rda's, the coils have always performed better as close to the airflow and centered on it as possible. I think this is why top airflow has never worked for my vape style.

 

[Mr.Mann]

Looks like squonking is really going mainstream now.

 

[HeiSINberg]

Looks like squonking is really going mainstream now.

That's pretty cool for a cheap alternative and an easy to grab set up. Especially for someone that doesn't wanna take there expensive gear out and about. Now, can you use any topper though?

Sent from my SM-G925V using Tapatalk

 

[Mr.Mann]

That's pretty cool for a cheap alternative and an easy to grab set up. Especially for someone that doesn't wanna take there expensive gear out and about. Now, can you use any topper though?

Maybe. Dunno. Considering the mod looks like it will be sold separately, my guess is yes.

Sent from my SM-G925V using Tapatalk

 

[HeiSINberg]

Sounds good! I wish more stuff like this would come out, not everyone knows if they like squonking, this is the perfect beater for an intro. I might pick it up as a back up. Again, I hate this thread lol carry on.

Sent from my SM-G925V using Tapatalk

 

[jhhollier]

As long as it allows you to use any atty on it, I'd snag one as well.

 

[HeiSINberg]

As long as it allows you to use any atty on it, I'd snag one as well.

Exactly what I was thinking, I didn't want kanger to make it a fixed topper only. But I'm definitely in for one if you can use any rda on it that's for sure.

Sent from my SM-G925V using Tapatalk

 

[inspects]

That looks like a nice little squonker....!

 

[Train2]

That IS interesting! Who'd-a-thunk-it, a Kanger squonker?

 

[Train2]

Heck, I even like what little I can see of the RDA: high side airslots (like a Nuppin) and a "not-quite chuff" top. If it's got Velocity posts in there, I might like it just fine like it's pictured.

 

[Uncletattoowhat]

I hate this thread lol

I hate it too. I've been fighting my urge to pick up a subzero rda and the MGNT rda. The only thing keeping me from doing it is the feeling I got when the last 3 drippers I bought paled in comparison to the Aeolus.

 

[jhhollier]

Heck, I even like what little I can see of the RDA: high side airslots (like a Nuppin) and a "not-quite chuff" top. If it's got Velocity posts in there, I might like it just fine like it's pictured.

My only issue with it would be if you can only use prebuilt coils. If I can build it myself I'd at least give the included atty a try.

 

[67Tele]

I hate this thread too...preordered the Tsunami today!

 

[jhhollier]

This thread has definitely inspired me to spend lots of money.

 

[67Tele]

This thread has definitely inspired me to spend lots of money.

And thanks for the Vape NW discount code on the Tsunami thread!

 

[HeiSINberg]

I hate it too. I've been fighting my urge to pick up a subzero rda and the MGNT rda. The only thing keeping me from doing it is the feeling I got when the last 3 drippers I bought paled in comparison to the Aeolus.

Personally I have both and I like the aeolus better. I love the MGNT but without its top cap it's just another 2 post rda lol the top cap is what makes it. If the aeolus was a 2 post it would completely blow it out of the water.

Sent from my SM-G925V using Tapatalk

 

[muzichead]

Looks like squonking is really going mainstream now.

There is a thread over in the liquid feed apv section of the forum for it. The ad that you posted is actually for the vendors and not the enduser it seems. That is a wholesale cost posted. It looks to have a proprietary atty on it that uses replaceable coils and only works in temp control from what I've read so far. That could be a huge factor on whether it will sell to the vast majority or not. I can't really imagine it not working with kanthal, but then again I know absolutely nothing about KangerTech and their products... I know the last couple cheap BF devices, (S-body, KangXin, & Steamcrave) that have sold recently have been a bust for various reasons so we'll have to wait and see what this one pans out to be.

 

[Mr.Mann]

There is a thread over in the liquid feed apv section of the forum for it. The ad that you posted is actually for the vendors and not the enduser it seems. That is a wholesale cost posted. It looks to have a proprietary atty on it that uses replaceable coils and only works in temp control from what I've read so far. That could be a huge factor on whether it will sell to the vast majority or not. I can't really imagine it not working with kanthal, but then again I know absolutely nothing about KangerTech and their products... I know the last couple cheap BF devices, (S-body, KangXin, & Steamcrave) that have sold recently have been a bust for various reasons so we'll have to wait and see what this one pans out to be.

Yikes. So much for getting info from FB.

 

[jhhollier]

Meh to only working in TC. I honestly don't use TC all that much. I love my SX chips for other reasons.