If you like less of an open draw, this should suit you fine. Even if one were to not squonk with the NoPity, you would still be fine as that well holds a LOT of liquid. For something like the Origen Little, you would almost have to squonk.
RDA Round-Table Discussion and Lookout
- Thread starter Mr.Mann
- Start date
- th_trl_thread_readers 0
- Status
If you like less of an open draw, this should suit you fine. Even if one were to not squonk with the NoPity, you would still be fine as that well holds a LOT of liquid. For something like the Origen Little, you would almost have to squonk.
If it is "first in hand" you have a good chance of winning! I won't see or touch mine until Friday....
I am kicking myself for not getting this or even looking into it. I had no idea the price would be so low. D'oh!
Did anyone here get this? @HeiSINberg
Last edited:
Here's my Goon. Built with a 10 wire braid, 3MMID. Talk about a lung hitter. Flavor is great too.
Just wanted to rebuild mine tonight after seeing others.
Love this build!!! I don't know what the ID is, but I used 26 gauge kanthal with a 6/7 wrap coming out at 0.39Ω. It's killin' it! I am at 40.9 watts on the Sxmini ML Class. It's great being able to get a bang-on vape at or under 40 watts. It's exactly where I want to be with my vape! If anyone else does feel that way, just remember that I have a Kennedy 22 and a Thump watching the NoPity get down!
Last edited:
Woot! I made the list for one of the 100 DAV engraved Drifters. Now to wait patiently for Hoberto to drop the BF kit.
Sent from my XT1096 using Tapatalk
Sent from my XT1096 using Tapatalk
I like the Little 16 so much I have two of them. I build mine with a 2.5mm single coil centered between the posts at under one ohm and I can get at least 4 good hits on my Reo Grand between squonks. And the flavor is the best of any atty I own.
Even wide open it gives a nice restriced lung hit. I have the cloud cap as well but haven't used it. I'm guessing it will indeed make some fog. Flavor is outstanding and the draw is silky smooth. I'm really impressed so far. The NoPity is definitely one of my favorite attys. I suspect I'll need another.
My NoPity didn't come with the cloud cap as I thought it would, was that a FB list only deal?
It was an extra $20 - they aren't included by default.
I got my drifter in yesterday, I'm not gonna do a whole write up on it since it's been done but I will give my thoughts. First off beautiful piece of machining as always, can't complain there. No marks or machine oil, there were a couple metal flakes when fully taken apart but no biggie. The o-rings are way to lose and it's a pain to drip without removing the whole top cap, personally I hate that, after a while it will push juice down onto whatever mod I'm using. You could drip straight through but the positive post is pretty high up near the drip tip, but it's doable. Spit back? None. Thank god. The flavor, hmmm, yeah nothing to write home about. I like my hobo 3.1 WAY more. This really is like a suped up hobo 2.1, if it wasn't a hobo product Id be selling it, and it's hard for me not to give him a glowing mini review but I'm being honest here as it's the truth. Another thing that bothers me is its loud, like whistle loud, I'm not a fan of loud rda's. I'm interested to see how making this BF makes this rda, better or worse. We'll see.
Sent from my SM-G925V using Tapatalk
Sent from my SM-G925V using Tapatalk
Ahhh, thanks guys, I wasn't sure. I didn't even try it yesterday so I have no idea if I need the cloud cap or not, guess I should build it & find out.
I got my drifter in yesterday, I'm not gonna do a whole write up on it since it's been done but I will give my thoughts. First off beautiful piece of machining as always, can't complain there. No marks or machine oil, there were a couple metal flakes when fully taken apart but no biggie. The o-rings are way to lose and it's a pain to drip without removing the whole top cap, personally I hate that, after a while it will push juice down onto whatever mod I'm using. You could drip straight through but the positive post is pretty high up near the drip tip, but it's doable. Spit back? None. Thank god. The flavor, hmmm, yeah nothing to write home about. I like my hobo 3.1 WAY more. This really is like a suped up hobo 2.1, if it wasn't a hobo product Id be selling it, and it's hard for me not to give him a glowing mini review but I'm being honest here as it's the truth. Another thing that bothers me is its loud, like whistle loud, I'm not a fan of loud rda's. I'm interested to see how making this BF makes this rda, better or worse. We'll see.
Sent from my SM-G925V using Tapatalk
Thanks for the review, once I saw the split four post I decided to pass, I'll take a two post any day. Is that drip tip just for the Drifter? I would like something just a little longer than the one on the Hobo but the same outside diameter.
I also just put a twisted SS 316L build in my 3.1, wow, I love this atty. It's so beautiful & performs so well I can't believe he doesn't make it anymore!
You have to email ruthless e juice to get on the list. It's basically a paypal list, you give them the info and they'll bill you for it. Oh and the best part is they lied lol its 100 pieces not 1,000.
Sent from my SM-G925V using Tapatalk
No this drip tip was off of narmods. But it's essentially the same one that came with your hobo 3.1 and my drifter just in ultem/black. The hobo tips and nar tips are the same, they've actually become my favorite tips lol and I've never paid for any of them.
Sent from my SM-G925V using Tapatalk
Thanks for the honesty @HeiSINberg I'm not going to lie I'm a bit bummed as After seeing the overwhelming response and positive review after review on Facebook I had high hopes !!???!!! Confusing however I see you struggling to write something negative about Hoberto and you like A LOT of the same atties as I do so I will try to temper my expectations.I got my drifter in yesterday, I'm not gonna do a whole write up on it since it's been done but I will give my thoughts. First off beautiful piece of machining as always, can't complain there. No marks or machine oil, there were a couple metal flakes when fully taken apart but no biggie. The o-rings are way to lose and it's a pain to drip without removing the whole top cap, personally I hate that, after a while it will push juice down onto whatever mod I'm using. You could drip straight through but the positive post is pretty high up near the drip tip, but it's doable. Spit back? None. Thank god. The flavor, hmmm, yeah nothing to write home about. I like my hobo 3.1 WAY more. This really is like a suped up hobo 2.1, if it wasn't a hobo product Id be selling it, and it's hard for me not to give him a glowing mini review but I'm being honest here as it's the truth. Another thing that bothers me is its loud, like whistle loud, I'm not a fan of loud rda's. I'm interested to see how making this BF makes this rda, better or worse. We'll see.
Sent from my SM-G925V using Tapatalk
Good morning everyone
Funny that you mention that, I tried to grab one off the Narmods site when I grabbed the BF pin but they were out of stock. I do really like the one on the Hobo but I find my lips on the top cap sometimes when I take a puff. What I've really been impressed with is the fact that the hot cap really doesn't get hot even with this twisted build in it so I guess I just have to get used to the fact that my lips may touch the top cap. Oh well, small price to pay for an awesome atty!
- Status
Similar threads
