RDTA building

[90VG]

You could probably get away with a cheaper sigelei also. I use the Spark. It holds up pretty well unless you drop it on rock/concrete. It also has a night light. I usually pay about $32 US for them and it has the built in ohm meter. It's just way safer to use the regulated mods as everyone else has been telling you.

 

[Winblows]

I have 2 of those batteries and they are perfect for my Griffins 25mm, REUX, and the TFV12 (dual RTA).
And yes, the amount of wire is essential.
The build, that runs best for me right now is the Griffin 25mm with a ø3mm 6 wraps single SS 317L 32ga (0.21mm) over 24ga (0.5mm) clapton - 0.3ohm.
I'm sure, that it will perform even better when I remove one round from this build.
The REUX have a dual build with 2x ø3mm 8 wraps and is too slow for this battery.

Griffin 25mm

Single SS 317L 32ga (0.21mm) over 24ga (0.5mm) clapton, ø3mm, 6 wraps - 0.3ohm, Rayon Cellucotton

 

[vapdivrr]

It is rebuildable. I tried to put the premade coils in first, but I think they were a bit much for the device. I made the coil myself, and have been using it for two days and it's actually working really well. I'm using the iJoy RDTA combo, so it's completely rebuildable, and has two different style decks. My device cant read ohms or resistance. Looking at getting the box probably in two months. I'm happy with this build and power, more getting a box for extended battery life and more options if ever need be. Can't for the life of me remember the brand, actually wanted to ask your opinion on it

Good luck and glad you got it sorted....

Sent from my SCH-I545 using Tapatalk

 

[Hentak]

I have 2 of those batteries and they are perfect for my Griffins 25mm, REUX, and the TFV12 (dual RTA).
And yes, the amount of wire is essential.
The build, that runs best for me right now is the Griffin 25mm with a ø3mm 6 wraps single SS 317L 32ga (0.21mm) over 24ga (0.5mm) clapton - 0.3ohm.
I'm sure, that it will perform even better when I remove one round from this build.
The REUX have a dual build with 2x ø3mm 8 wraps and is too slow for this battery.

This is what I've got in as it only runs at 50W, but its working nicely. Excuse the crappy build is only the second one I've done

 

[Winblows]

This is what I've got in as it only runs at 50W, but its working nicely. Excuse the crappy build is only the second one I've done

The build looks fine.
On iJustS, I won't recommend to build with wire thicker than 0.4mm (26ga), the coil diameter bigger than 3mm and no more than 6 wraps.
This is what works best for me on the iJustS battery.
"Excuse the crappy build"? Don't. Just hang on, you are doing great!