RDTA Coils, which ones should i get?

[loque87]

Hiya. Newbie questions here. I just purchased my first RDTA and i'm not sure on what coils i should use? I'm not thinking about building my own coils, rather buying them pre-wrapped (to begin with at least). Also, is an ohm reader necessary when buying them pre-wrapped?

The RDTA i bought is an 'iJoy Combo RDTA' and the box mod I've got is an MVP4.

Also English is not my first language :3 Thanks!

 

[opticruby]

Hello @loque87.

I just purchased my first RDTA and i'm not sure on what coils i should use?

Any coils will work but something to remember is your mvp4 will fire down to 0.1 ohms so if you use dual coils they'll need to be at least 0.2 ohms (ideally 0.25 ohms), per coil, as doubling the coils halves the ohms.

So any coils you think you'll like will work.

Also, is an ohm reader necessary when buying them pre-wrapped?

Your mvp4 has a built in ohm reader so that'll work fine.

Also English is not my first language :3

Your English is excellent, I'd have thought it was your first language.

Welcome to ECF!!!

 

[loque87]

Hello @loque87.



Any coils will work but something to remember is your mvp4 will fire down to 0.1 ohms so if you use dual coils they'll need to be at least 0.2 ohms (ideally 0.25 ohms), per coil, as doubling the coils halves the ohms.

So any coils you think you'll like will work.



Your mvp4 has a built in ohm reader so that'll work fine.



Your English is excellent, I'd have thought it was your first language.

Welcome to ECF!!!

Thank you so much!

 

[Gramdogg]

Get a coil jig to wrap coils, as for building them not many make their own fused claptons etc anymore. They come in 5m spools $5-10 or 10 pack individual lengths $1.50-3 these days that cost what people used to charge for a set of 2-4. If you just wnt low watt flavour builds get 26 awg SS 316L or N80, 5-7 wraps 2.5-3mm ID, if you want massive clouds and high watts you'll need fused claptons, staples, aliens etc. Just a normal clapton 26/32 would be a in between the two coil.

 

[BrotherBob]

Hiya. Newbie questions here. I just purchased my first RDTA and i'm not sure on what coils i should use? I'm not thinking about building my own coils, rather buying them pre-wrapped (to begin with at least). Also, is an ohm reader necessary when buying them pre-wrapped?
The RDTA i bought is an 'iJoy Combo RDTA' and the box mod I've got is an MVP4.
Also English is not my first language :3 Thanks!

Velkominn and glad you joined.
Looks like you are set up for advanced vape gear and sub-ohm'g.
Wire coils:
FastTech - Gadgets and Electronics
Might like to read:
mtl type rda tank and coil build
MTL (Mouth-To-Lung) vs. DL (Direct Lung) Tanks | Cig Buyer.com
Rayon wick, better flow, flavor, saturation and Nic Hit!
http://best-e-cigarette-guide.com/e...cigarettes/sub-ohm-vaping-perks-and-problems/
What is Sub Ohm Vaping? Our Sub Ohm Vaping Guide & Tips
All About Sub-Ohm Vaping | Spinfuel VAPE
Battery safety
Care and Use of 510, eGo and Variable Voltage Batteries
(7) Information Resources for Your First RBA | E-Cigarette Forum
ECF Sub-Ohm Advisory

 

[opticruby]

Thank you so much!

Your welcome.