Utilizing an rda w/ 3 poles. When building a dual coil, is it considered a serial or parallel dual coil? 
TIA!
TIA!
Re.: Dual coil build...serial/parallel
- Thread starter Neunerball
- Start date
- th_trl_thread_readers 0
- Status
Utilizing an rda w/ 3 poles. When building a dual coil, is it considered a serial or parallel dual coil?
TIA!
You build two coils in parallel; each coil gets the same voltage from the power source.
You need to get the two coils the same ohms otherwise one coil will get hotter than the other.
The 3 pole RDA has 1 common center pole; one leg of each coil connects to this pole.
For convenience, the two outer poles are provided so that you can connect the second leg of each coil independently - you can also there adjust the length of the coil leg - tweaking it a little in order to match the ohms of the other coil.
If you check with a multimeter or just look at the metal of the deck, the two outer poles are electrically the same- the are connected via the deck itself.
Neunerball it would parallel and the other word is series not serial for more help you might try here http://www.e-cigarette-forum.com/forum/gotvapes/560505-woodys-safe-guide-vaping.html
Guess I'm too much of a computer scientist. That's why I used serial, as in serial interface.
I thought it was parallel, just wanted to make sure.
Last edited:
You build one coil on one side parallel = Dual
You build two coils on each side parallel = Quad
We have been doing this since last Oct and its original name was "Side by Side" Build. Around the same time the "electric stove" coil was made which people call now "stove top coils"
You build two coils on each side parallel = Quad
We have been doing this since last Oct and its original name was "Side by Side" Build. Around the same time the "electric stove" coil was made which people call now "stove top coils"
- Status
Similar threads
- Locked
