I am interested in trying a rebuildable atomizer to try to get better flavors out of my juices and just to learn something new. But I want a simple one to start. I am not particularly handy and will have a lot to learn. Does anyone have any suggestions?
Rebuild able atomizer
- Thread starter dherrington
- Start date
- th_trl_thread_readers 0
- Status
I started with an I go s and a week later got a patriot. The igo s has a small area to work in but if you can rebuild coils in something like a protank its alright. The bigger ones are much easier to work in,way more room!
Sure, try the RSST with a 400 SS mesh wick and some 28 kanthal 4/3 wrap for .8 ohm on a mech. It worked for me pretty well for a while, but I ended up going to 26 kanthal with a 5/4 wrap and .7 ohm, which stays on target at that resistance and you don't get ohms creep. Very good vape, good vapor and flavor.
Go on youtube and watch some coil builds. One guy that i watched that helped me was ripp trippers. He explains everything very well and shows you what to do. There are a lot of other people on there that can show you what to do. Its not hard after you do it for while. Just be patient and dont get upset with yourself wheb you dont get it the first 2 to 4 times lol. Took me awhile to get them right and im sure it took other people awhile to get used to them. Make sure you are doing it safetly also. Means use correct batteries. I recomend the sony 18650 2100 mah battery. It has 30amps. Also make sure you have proper ventilation on the mod you will be using.
I use 28 gauge and 24 gauge kanthal wire. I also use cotton for wicking. You get better flavors and vapor. Make sure you have some type of device weather it be a APV mod or a ohm reader so you can tell how many ohms you have with your build. But just look around on youtube theres a lot of instructional videos on there. Thats where I learned.
Sent from my SPH-L720T using Tapatalk
- Status
Similar threads
- Locked
- Locked
